This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
I have been trying to figure this stuff out for 3 weeks now...
I'm tryin to burn lotr tt Xvid into svcd
had probs like
bad frames (fixed these)
too long (fixed this- divided it into 4 cd's 45 mins each)
screen size 640x272 (fixed this with TMPGEnc)
converted it with TMPGEnc and my output files are mpg
each about 740 mb
My problem is now that I've gotten everything working perfectly, I burned it with nero 5.5 and playback is perfect on my computer (using windvd)
but when I play it on my DVD player (1 panasonic, 1 Apex - both SVCD compatable)
it shows the movie length as 74 minutes (when it is only 48 minutes)
in both players...
When it plays it is extremely choppy
(but will play almost perfectly if I hit fastforward 2x)
I have been trying to figure this stuff out for 3 weeks now...
I'm tryin to burn lotr tt Xvid into svcd
had probs like
bad frames (fixed these)
too long (fixed this- divided it into 4 cd's 45 mins each)
screen size 640x272 (fixed this with TMPGEnc)
converted it with TMPGEnc and my output files are mpg
each about 740 mb
My problem is now that I've gotten everything working perfectly, I burned it with nero 5.5 and playback is perfect on my computer (using windvd)
but when I play it on my DVD player (1 panasonic, 1 Apex - both SVCD compatable)
it shows the movie length as 74 minutes (when it is only 48 minutes)
in both players...
When it plays it is extremely choppy
(but will play almost perfectly if I hit fastforward 2x)
Well if the File Plays Perfectly on your Computer and you Burned it correctly with Nero then all that leaves is your DVD Players,Cuz if after encodeing to Mpeg2/svcd the File plays perfectly on your Computer then Tmpgenc"s Job is completed cuz you have a Mpeg file that Plays perfectly, I have a suspicion that your DVD Players can not handle the SVCD Bitrate you are useing, When the Bitrate is too high for your Player to handle you will get a Very Jumpy effect and the Audio will sometimes cut out and the Video lags behind the audio and then speeds up again to catch up with the Audio while constantly Stuttering and Jumping, if this is the Effect you are getting then that is Probably your Problem...Tmpgenc has Very Bad Bitrate controll so the Bitrate you set in Tmpgenc is not necessarily the Bitrate of the File it encodes, the Bitrate tends to spike Quite often to a much higher Bitrate than you specify..You can either use a Lower Max Bitrate or Try CBR, or an encoder that Has better Bitrate controll...
yes that does sound like the problem...
however would this explain when I put it in the dvd player it says 74:23 minutes... when the actual length is 48:31 minutes
and if I play it at 2x speed it plays almost perfectly (except for the little fastforward >> logo on the side :) this coincides with the incorrect time amount
Would a lower bitrate change this? what should it be changed to?
also, is there a standard for DVD players?
btw, I have about 5 copies of the first disk :(
I just tried DVD2SVCD, on normal settings... same problem, only it took 4 hours this time instead of 45 mins.
From your Bitrate viewer info it seems like the bitrate seems fine, but I don"t know if that takes into account Bitrate Spikes, and I also noticed that your VBV Buffer is a Little low, and Like Ashy said it should have been encoded as Interlaced instead of Progressive, All I can think of is that Maybe your AVI File has a different Frame rate than the Mpeg file, you have to encode to the same Frame rate as the AVI file...But if the File Plays fine on your Computer then it seems that the real problem occured after encodeing ,Make sure you chose the NTSC option in Nero and Not the "Pal" option cuz that Might cause a problem like this...Have you tried a Different Burning Program like maybe "VCDeasy" or if you have a SVCD Authoring Program try that...
i am having trouble getting the program VCDEasy to construct chapter points in an intro mpeg im trying to make. i have a 142 frame NTSC-film mpeg, and i would like to create a chapter point at frame 140. to do this, i know i must create an 'I' frame with TMPGEnc at frame 140. my problem occurs after making 140 an i frame, and then trying to create a chapter point. for some reason, VCDEasy wont recognize this frame as a valid chapter point, and it skips to the (i assume) nearest i frame instead.
my question:
in order to create a proper chapter point, is anything else necessary besides the i frame? do i need to make the proceeding/preceeding frames P/B ?
has anyone had success constructing custom chapter points with this software combination?
I have created a .mpg file of a DVD and am using TMPGEnc to cut out the ending credits. My original file is in the proper aspect ratio for a VideoCD (352x240) however when I attempt to produce the edited .mpg file, it always cuts the aspect ratio down to 312x240
Can someone please help me out here? Any suggestions on how to resolve this issue?
i am having trouble getting the program VCDEasy to construct chapter points in an intro mpeg im trying to make. i have a 142 frame NTSC-film mpeg, and i would like to create a chapter point at frame 140. to do this, i know i must create an 'I' frame with TMPGEnc at frame 140. my problem occurs after making 140 an i frame, and then trying to create a chapter point. for some reason, VCDEasy wont recognize this frame as a valid chapter point, and it skips to the (i assume) nearest i frame instead.
my question:
in order to create a proper chapter point, is anything else necessary besides the i frame? do i need to make the proceeding/preceeding frames P/B ?
has anyone had success constructing custom chapter points with this software combination?
How are you makeing Frame 140 an I frame??? You can use "Force Picture Type Setting" to make certain Frames I Frames but if this is how you are doing it and it still will not recognize it as a Valid chapter Point then the Only thing I can think of maybe there needs to be a Certain amount of frames after the chapter Piont for it to be a Valid Chapter point, But this is Totally out of left Field Cuz I don"t know if this is true or Not..You can also try another Authoring Program that supports Chapters, there are Many but few are freeware but you can allways download a 30 day demo from the Ulead site and try one of there VCD/SVCD authoring Programs that supports Chapters Like DVD Movie Factory and DVD Workshop....
yep, i was using force picture type setting. i would really like to remain using vcdeasy as i have heard many opinions that it gives far superior chapter control (and various menu making capabilities). i will check them out...until then i guess ill post in vcdeasy forum (although there are already several threads in which this problem remains unsolved there).
I have been trying to figure this stuff out for 3 weeks now...
I'm tryin to burn lotr tt Xvid into svcd
had probs like
bad frames (fixed these)
too long (fixed this- divided it into 4 cd's 45 mins each)
screen size 640x272 (fixed this with TMPGEnc)
converted it with TMPGEnc and my output files are mpg
each about 740 mb
My problem is now that I've gotten everything working perfectly, I burned it with nero 5.5 and playback is perfect on my computer (using windvd)
but when I play it on my DVD player (1 panasonic, 1 Apex - both SVCD compatable)
it shows the movie length as 74 minutes (when it is only 48 minutes)
in both players...
When it plays it is extremely choppy
(but will play almost perfectly if I hit fastforward 2x)
I have been trying to figure this stuff out for 3 weeks now...
I'm tryin to burn lotr tt Xvid into svcd
had probs like
bad frames (fixed these)
too long (fixed this- divided it into 4 cd's 45 mins each)
screen size 640x272 (fixed this with TMPGEnc)
converted it with TMPGEnc and my output files are mpg
each about 740 mb
My problem is now that I've gotten everything working perfectly, I burned it with nero 5.5 and playback is perfect on my computer (using windvd)
but when I play it on my DVD player (1 panasonic, 1 Apex - both SVCD compatable)
it shows the movie length as 74 minutes (when it is only 48 minutes)
in both players...
When it plays it is extremely choppy
(but will play almost perfectly if I hit fastforward 2x)
I want to put VCD mpeg1 content on dvd for dvd player playing. I DO NOT want to convert the audio to 48khz. this takes FOREVER. (I have over 300gigs of mpeg1 content (it really is almost all home videos as my camcorder records direct to mpeg1 via a pcmcia hard drive))
What I want to do is TRICK software into seeing my 44khz and 33khz files as 48khz files. Specifically I am using dvd moviefactory 2.0 I want to do something to the files to make ulead's software think that the file IS a proper mpeg1 48khz audio file and attempt NO conversion.
Can anyone tell me how to do this OR can anyone (authors of tmpgenc maybe ??) make a program to do this (spoof the headers or something) so that when programs like moviefactory look at the file they THINK they SEE a legit 48khz file and therby do not attempt to modify it. (doing 7 hours of content so far after a little under 3 hours it is at 55% and I am running a 2.8ghz P4 with a gig of DDR ram) this is not acceptable.
I am confident that dvd players will see it just fine even if its not tecnically correct to the dvd specs. IE I burn 33khz files to VCD's (nero lets you override it after it warns you that the audio is not right (but it does not let you ovverride for dvd's)) and every dvd player I have put that disc in plays it just fine.
Why is it taking you so long to convert a 44.1khz file to 48khz? I can do a 100 min mp2 file in about 15mins on my p4 1.7 using TMPG.
I can do it in about 5 mins from start to finish if I convert the audio to a 48khz wav first with TMPG and then encode to mp2 with MPEG Suite 2001 http://ec2000.xperiment.net/index.php?id=software
There is a Program that can change the headers on Mpeg files so you can fool Authoring Programs/DVD Players ,it is called "DVD Patcher" But this Program only changes the header on Mpeg Video and Not the Audio so you are out of Luck in that department until it supports Mpeg audio..But resampleing audio is easy and fairly fast, you just need to de-mux the audio from your Mpeg1 files, then load the Audio into a fast & Good Audio encoder and Change the sample rate, it shouldn"t take longer than 10 minutes per hour of audio, even less on your system, after resampleing the audio you just need to mux the audio back with the video...
--------------------------------------------------------------------------------
john ( Mail ) 04/08 (Tue) 11:27 ( ID:ch3wja83ual ) [ Edit / Delete / Reply with quotation ]
any1 ????
--------------------------------------------------------------------------------
Ashy 04/08 (Tue) 12:59 ( ID:n3gjkhi6dvc ) [ Edit / Delete / Reply with quotation ]
Why in the hell do you have your filter priorities set so high?!
You very rarely have to even have any of the filters above 2 never mind anywhere near 7. Your settings are just crazy.
My advice to you is to first lower all those priorities. Change directshow to 2, and the rest to 0
ASHY
--------------------------------------------------------------------------------
john ( Mail ) 04/09 (Wed) 03:09 ( ID:ch3wja83ual ) [ Edit / Delete / Reply with quotation ]
OOh sorry i will try this hope it works
My problem is, that when I try to encode some avi files and outpost them to avi but of lower resolution, the output file has the double of the original file playing time, and half of it is the one that belongs to the actual movie and the other is just a black screen. This happens a lot when doing this from DVD rips.
Is there a way to solve it?
If you are encodeing AVI files you are NOT encodeing DVD rips, DVD"s are ripped in either VOB format or Mpeg2 Format(M2V), What should work is to use the "Source Range" to set the beginning and end Points of the file you are encodeing...
I tried encoding with another program. Again sound worked fine before, but when I join with TEMPEnc, there is no sound. Please help! Why am I having these sound problems. I have made numberous movies without incident??????????
I have the same problem too. This seems to be a bug that renders the program useless. It's in the Plus version too I have paid for ! I only get a unsupported fileformat error, even for plain PCM wave files.
I tried the new freeware version and with this the sound works.
You said you encoded the audio with a Seperate Program? What Program?? and you said you joined the audio in Tmpgenc and it wasn"t there?? How did you join the audio in Tmpgenc???
Hi guys and gals.
When I load an .avi into TMPGEnc Plus 2.57 it always sees the framerate (displayed at the bottom of the main window) as 30 fps even if the .avi file is not 30 fps. I can load it into VirtualDub and choose "file information" and it is sometime 23.976 (NTSC film) or even 15 fps.
Yet when I reload the file into TMPGEnc it says it's 30 fps. It seems like it's stuck on that setting somehow.
This just started happening recently and it worked right before. It sees the resolution correctly but not the fps. How can I solve this. If this helps, I'm using WinXP.
No, no template is loaded. It just no longer sees the file as the correct framerate. Just a bug I guess. I guess I'm alright if I check the fps in VirtualDub first and load the correct template.
Thanks for you help anyway Ash!!!