Hi,
I've seen that whenever i try to convert more than 1 file thru this App it crashes with a "don't send" followed by "runtime error 204" message box. any clues ? I have xp.

Try to run the application as Administrator, also check about your codecs, its possible that you have broken one, XPress 4 reads all codecs installed in your PC so when one is broken, corrupted, limited edition, weird, or not compatible such crash tents to come out.
So try by uninstall codecs pack or trial codecs, those sometimes brings trouble.
good luck

Will H.264 be supported?

I dont think so since this software is for Edition of MPEG format only.

good luck

I have successfully added subtitles in the edit mode, and these display on simulation, but they do not appear when I play back the output file. How can I fix this, please?

Have you activated the subtitles? By default they won't appear, just like commercial DVDs, so you have to go to the subtitle or setup menu and activate the subtitle stream.

I have some PAL DVDs that I'd like to make into exact copies but in NTSC format. Is it possible to import the original DVD menu, I don't see a way? Only the video clips get imported from the VIDEO_TS folder and I seem to have to create my own menu.

This cannot be done in DVD Author and from my previous research, menus from existing DVDs cannot be re-used in new DVDs without some very complicated, technical processing.

Check here for some tools that can help do that:

http://download.videohelp.com/r0lZ/pgcedit/
http://www.free-codecs.com/download/IFOEdit.htm

I have just converted an AVI to Apple tv format normal quality and the picture quality is good, however, I have repeated jittering throughout the entire movie. I also get picture freezes and the audio continues. Any Ideas what may be causign this?

I think this could be related to your QT version, or you may need to re-install it or install another MPEG-4 AVC codec. Also if you have QT PRO could be a reason.
good luck

I have found this one site to help me with allot of my questions when it comes to dvd quality and conversion.

www.digitalfaq.com/dvdguides/basics/dvdintro.htm

This site has been up since 2005 and it still holds true to this day.
DVD BASICS
- Introduction to DVD-Video
- Quick suggestions and concepts
- Video tips weblog
- Blank DVD/CD/VHS media guide

CAPTURING
- Introduction to video capturing
- Understanding your source
- Playback hardware suggestions
- Capture MPEG with ATI AIW cards
- Capture AVI with ATI AIW cards
- Audio sync and dropped frames

EDITING
- Removing commercials in MPEG
- Edit disc from DVD recorder
- Edit with Adobe Premiere

RESTORING QUALITY
- Introduction to restoring video
- Hardware video filters
- TMPG software video filters
- Introduction to restoring audio
- SoundForge software audio filters

ENCODING & CONVERTING
- Introduction to video conversion
- Encode MPEG with TMPGEnc
- Convert VCD to DVD
- Convert PAL/NTSC standards

AUTHORING/BURNING
- Introduction and authoring FAQ
- Make menus in Photoshop
- Blank DVD media quality guide
- Author with Sonic DVDit!
- Author with Ulead DVD Workshop
- Author with TMPGEnc DVD Author
- Burn DVD files: Nero

DVD COPYING
- Introduction to copying discs
- Copy a DVD5 with DVD Decrypter
- Copy a DVD9 with DVD Shrink
- Copy to VCD/SVCD/DVD by Sefy

BUYER'S GUIDE
- Introduction to buying video stuff
- DVD recorder reviews and tips
- Where to buy DVD cases/storage
- Where to buy DVD media

MISC VIDEO INFO
- Make DVD cases in Photoshop
- DVD player troubleshooting
- DVD burner troubleshooting

This will get you to reading allot. But it is worth it.

does anyone know why the bitrate in the bluray output file is limited to a max of 25000 ? I have several bluray videos with over 35000 in bitrate.. so the quality is pour when I encode the videos! I have found out that the AVC codec/output is good but then the sound is OFF !?

I do not know the reason but may be its because its the limit standard?, I dont know, but you can try by MPEG-2 Video, NTSC, 1920x1080, then you can set 32000 as max. bitrate at the tamplate "Settings" button,
give it a try.
About the AVC its very weird, what could be the reason?, I also wonder, may be your source file is broken?, try to multiplex it at MPEG Tools.

good luck

Hi
You are right we can encode upto 32000 only. How to encode at 35000?
.mp4 is not a bluray compliant file. we need .avc only. How to get these ?
Thanks
Chandna

I have an MPG video file that I want to extract the audio portion. I need to wind up with an .ac3 file so I can use it in DVDLab.
Thanks,
Pete

If you file is a standard mpeg video try the following:
-1 Open the MPEG Tools, and input directly your mpeg file.
-2 If it could be correctly input, click the "Start" button to
Demultiplex your file (the output file must be in the same folder).
-3 You will get a separated .ac3 file from demultiplexer.

good luck

Hi Guys :-)

Is there anyway to demux mp4 files into their separate audio/video streams? I have an mp4 file who's audio needs to be increased. I thought demuxing, adjusting the audio, then re-muxing would be a great way of handling this.

Thanks for any help on this!

Bryan McFarland
:-)

I think there is no way to demux mp4 files since they are not supported on the MPEG Tool, so I recommendo you first to encode it as mpeg, apply the demultiplexer then make the corrections and re-encode it as mpeg4.

good luck

Search for a tool named Yamb.

Dear TMPG Inc.,

your software products are really great - but your care about the TMPG community is a shame!

Are you not interested in what your customers have to say? Are you not interested in what your customers think and would like from you? Don't you think it's time to help your customers to help each other?

Take a look on this forum - its usability is very poor... it's simpy the opposite from all your software products takes care about.

So shame on you TMPG!

Are you not able to do this better than that?

C'mon guys... ;)

I do not think you are right, I think they just cant handle this forum because they are so busy (creating and developing their software) to be able attend all users requests, besides this is an OPEN forum for USERS its not a support center.
So I suggest you to be concern and reconsider on what you said.
TMPGEnc makes really good products and so they deserve respect.

good luck

Since they have announced that they will be using CUDA technology for their products already an update is coming out next week. I received an email. I am very, very happy with their work behind the scenes so I am ready to overlook that they haven't much time for customer forums. I would rather have better technology and programs from them than just a better moderated forum because I need good programs for my work and their programs are very well done.

CUDA version is out!! Thanks heaps!!TMPGEnc are on the job and I really appreciate it.

It is not a bad product, but if one is to remove rose colored glasses, one would see that less time would be spent by posting replies for all to see, rather than answering them individually.

When I try to start the program I get an error message that says address 00000000 (or whatever) read error address 00000000 (etc.) I only bought this last week and I have tried downloading the repair and modification options but nothing seems to work. Has anyone got any ideas please? I am a novice at DVD authoring so need simple instructions.

First download and install the newest version and try.
If still bad...
Try by disabling your security system.
Some times secure software checks actions in the memory, if it is
blocked comes out such error message.
There are other several probabilities for this problem:
1.- Codec pack,
2.- Quick Time.
3.- Other video applications.
-There is the possibility that the codec pack is making conflict.
If you have installed Ffdshow ,K-lite or other codec pack
please uninstall them and try.
When DVD Author 3 starts it searches all codecs which are installed in your
PC. But when there are any broken, corrupted, trial finished an unusable
codecs, becomes such error.
-Also if you have installed Quick Time, please try by uninstalling it or
installing the newest version.
-Have you installed some other software trial version which is for edit
or show video (except TMPGEnc software)?. Sometimes it will be the reason,
after end of its trial period.
* This problem doesn't happen so much with free codecs but codecs from
shareware or trial version it does.
Its not frequently but randomly other video applications contains codecs
which are simply not compliant with DVD Author 3, if that's the case try by
uninstalling them.

If still no good probably you need to make a complete re-installation of your OS and try again, I have the feeling this is about corrupted or broken codecs you have into your PC.

good luck

hi im having the same problem... "At Address 6975515C, Read Error Occurred Against The Address 6975515C" Then the program terminates.
I tried:
-Defragmenting. I read that a excessively fragmented disk can cause problems like this.
-Scanning for Viruses/Malware.
-Reinstalling the program.
-Installing new codecs
-running virus scan

screw it im reformating

how do i add subtitles to an avi file then sve them on it i have both avi file and sub file