Everytime I install TMPG version 5.1.1.52 and try to load it it says cannot TImageDatasplash_enmodule

Try running the installer again and select the "Repair" option.

So I was trying to test this out on a Rip which contains VC-1 (AP@L3) video according to MediaInfo and i receive the following error:

This title cannot be selected because it does not contain and processable video.

Is this a known issue and are there any plans to implement support for VC-1 Source video?

I don't think certain types of VC-1 video can be processed. I tried importing a VC-1 encoded Blu-ray and it couldn't read the video stream.
I have emailed their support about adding VC-1 blu-ray support and they said they would add it to their request list. Whether or not it will actually be implemented is unknown.

THat was the response i recieved as well. they also alluded to it possibly working in other situations but were unable to elaborate on when that might be. Here was their response:
"We have other reports that with some codecs such format could be
imported into Video Mastering Works 5.
We cannot give you a suggestion of codec due that we don't know and we cannot
be responsible of codec's functionality over your PC so you could try to
look for it by google or other portal, please try to look for a codec
which supports VC-1video files and it is compatible with your OS."

Not quite sure what to make of that.

They are suggesting we find a codec with VC-1 support. Since TVMW5 uses the codecs on your computer, if a proper codec is installed it should be able to read the file. It would have been nice if they said which codec was found to work because I have yet to find one.

Here was the latest from support:

" if you can find a codec which can be used for
decode (import) VC-1 from your .m2ts file through Video Mastering Works
5 and DirectShow then probably you could convert it to another formats
using Video Mastering Works 5."

So here is what i've tried.
LAV CUVID
ffdshow
ffdshow (DXVA)

all in both x86 and x64 flavors and none worked.

Ok, not sure why but i was able to get Microsoft's Expression Encoder 4 to work with ffdshow on the same file.

The settings in ffdshow were only set for VC-1 and i used libavccodec instead of wmv9.

It appears that i cannot get TMPGEnc to utilize ffdshow for some reason. Anyone know how to force it to use another Direct Show codec?

I can even verify via graphstudio that the video should be using the FFDSHOW settings for VC-1.

Anyone have any thoughts?

I think the only thing you can do is force it to use the directshow file reader (which should contain ffdshow codecs). Go to preferences and look for the "file input plug-in" option. This lists all of the file readers. You can uncheck all of them except the directshow reader to "force" it to use only directshow codecs.

I was finally able to get this to work. by setting FFDSHOW to Libavccodec for VC-1 and then use the Windows7DSFilter Tweaker program to set the preferred Direct Show filter to FFDSHOW, i was able to import and convert VC-1 video to WMV.

I did not actually have to uncheck all the values in the file input plugin area in preferences.

I am trying the trial version and i have added my videos but when i view the videos through the player i am getting lots of digital break up and it looks horrible.

I have burnt a dvd to check it is the same on a DVd player and it is.

But when i watch the original videos there is no break up?

I want to buy this software but bot if it is going to look like this

any ideas?

What will really help is if you tell us what your source video format is. Use a program like MediaInfo and post the video's info here.

Will I be able to open my TMPGenc Xpress 4 projects with this version?

You can, but it warns you that it may not be able to convert every aspect of your 4.0 XPress project over to tvmw5.

By default it will only look for tvmw5 project files, so you have to make sure you select to view all file types when importing the 4.0 xpress project file.

Thanks tkrave.

Tmpgenc 5.1.1.52 is duplicating frames in the output. I have posted an 8 second video input,
recorded in HD 1920 x 1080, progressive scan, 30p, on a JVC GY-HM100U camera in Quicktime .MOV format.
File is: www.sportsflashtech.com/video/stutter/765_0636_01.MOV
For output I select DVD-Video standard MPEG file, 16:9 aspect ratio, CBR, set Average video bitrate to 8500,
select Display_mode: Progressive, Encode, Export.
It takes only a few seconds to encode.
I posted the output file, www.sportsflashtech.com/video/stutter/765_0636_01-8500k-8s.mpg
Go back to Edit, add file, select 765_0636_01-8500-8s.mpg, Cut-edit, then play/single-frame to frame number 92.
Now step one more frame and you will see frame 92 is duplicated. Also duplicated is frame 186 and frame 279.
When I repeated this encode, I did not get duplication in the output the second time. However the reason I reduced the failure to a simple 8 second video clip is when I encoded my entire video,
consisting of 3G across 10 .MOV files, I was getting a much higher frame duplication rate: every 3rd frame
was duplicated!!
What is going on here?
I am on Windows 7 64bit. I use the Calibrated Software codec,
http://www.calibratedsoftware.com/QXD.asp

Thanks for any advice. At this time I am continuing with TMPGenc 4 XPress.

Hi,
I get an error message every time I try to run a simulation for a given video project : "The GOP is too long"
There's no way I can modify it in TMPGenc, so how can I change this?

Thanks for your help.

There are a few possibilities.

One, it could be a false positive and you can ignore the error. If you know for a fact that the GOP is correct, then you can ignore it. The ultimate test will be when you play the outputted files through a DVD player (you can test it on your computer if you have DVD playing software).

Two, it could be that the GOP is actually wrong and you'll have to re-encode your source files. There needs to be a certain GOP length for NTSC and PAL DVD-Video. See this thread at videohelp.com for info:
http://forum.videohelp.com/threads/211205-The-Video-GOP-is-Too-Long-TmpgEnc-DVD-Author?p=1211975

I just started a trial of VMW5 and it's pretty damn good with one huge exception - DTS support!!! I'm very impressed with everything and how it actually works. (compared to the tons of products out there that are bug-ridden clones)

For the $99 price tag it should handle DTS. IMO it's worth $29 without DTS. Just one persons opinion, no need to go nuclear on me!

I may still buy it, but having to extract my DTS streams, convert then to AC3, then select the AC3 file is time consuming chore akin to command line freeware not a robust product like VMW5.

Still, I'm very impressed with this program. It will actually output to HD WMV with 5.1 audio properly. Squeeze 7 at 6X the price has yet to get that right.

Also would be nice to have VC1 as video codec choice for WMV...

I totally agree, more than half of my Blu-Ray's have DTS audio! Its a real pain to save to mkv, convert and re-mux the DTS to ac3 and then bring it back into TMPGEnc5.

Hopefully they i will look at fixing this ASAP, otherwise i will have to find another program.

Hi,

I also agree that the missing support for DTS audio is not very nice and at the moment for me a reason to wait for the upgrade from TMPCEnc XPress 4.

Is there a workaround available?
e.g. recoding the audio with another program and add it to the project without reencoding the audio again?
I saw in the trial of VMW5 that now M2TS output is supported so I can muxx it. But on the other hand I prefer MP4 because it contains less overhead.

Bye
Jens

Strongly agree, here we are in 2014 and still no DTS support. I now own BlueRay disks with *only* DTS audio. I can't use TMSR4 or TVMW5 for disks without handling the audio via other tools. Please add support for DTS!

I want to create a blu ray disk based on other multi-audio/multi-subtitled disk.
This is the first time i am doing it in a Blu Ray (done allot of DVDs before).

When i import the files to the project (using the Source Wizard, From...) I have to select the files i want individually but it doesn't give me any option about subtitles or audio language I want after.

What I am doing wrong?

I don't think you're doing anything wrong, I just think that TAW4's blu-ray importation tool is not very advanced and not up to the level that the DVD importer is.
That said, I'm not sure how you'd extract the other audio and subtitle streams. You may have to use some other software besides TAW4.

In Video Mastering Works, I see 23.976, 24 and 29.97 fps for
1920x1080 (standard Blu-ray template) but I only see 23.976, 24 and
59.94 fps for 1280x720 (standard Blu-ray template). There is no 29.97 fps for 1280x720 Blu-ray standard template.

I assume the templates are Blu-ray compliant so not sure if I should change the framerates in them manually.


1. If my source video is 720p and 29.97 progressive, what setting template should I use: 29.97 fps 1920x1080 (standard Blu-ray template), 23.976 fps 1280x720 (standard Blu-ray template) or something else?
Would the output also be progressive or interlaced?

2. If my source video is 720p and 23.976 progressive, what setting template should I use: 23.976 fps 1920x1080 (standard Blu-ray template), 23.976 fps 1280x720 (standard Blu-ray template) or something else?
Would the output also be progressive or interlaced?

3. If my source video is 480p and 29.97 progressive, what setting template should I use: 29.97 fps 1920x1080 (standard Blu-ray template), 23.976 fps 1280x720 (standard Blu-ray template), 23.976 fps 1280x720 (standard Blu-ray template) or something else?
Would the output also be progressive or interlaced?

Thank you for your help

>In Video Mastering Works, I see 23.976, 24 and 29.97 fps for
>1920x1080 (standard Blu-ray template) but I only see 23.976, 24 and
>59.94 fps for 1280x720 (standard Blu-ray template). There is no 29.97 fps for 1280x720 Blu-ray standard template.
>
>I assume the templates are Blu-ray compliant so not sure if I should change the framerates in them manually.

You are correct, those are BD compliant so you shouldn't change the framerates. 29.97 fps is not compliant for 1280x720 resolution for the BD format.

>1. If my source video is 720p and 29.97 progressive, what setting template should I use: 29.97 fps 1920x1080 (standard Blu-ray template), 23.976 fps 1280x720 (standard Blu-ray template) or something else?

Technically, you can use any template you want. However, I would use something close to the source characteristics such as 1280x720 59.94fps. Using that template will simply double the framerate.

>Would the output also be progressive or interlaced?

Depends on what resolution and framerate you choose. All 1280x720 resolutions are going to be progressive. The other BD resolutions can be interlaced depending on your framerate. DVD-Video resolutions (which are also BD compliant) will always be interlaced.

>
>2. If my source video is 720p and 23.976 progressive, what setting template should I use: 23.976 fps 1920x1080 (standard Blu-ray template), 23.976 fps 1280x720 (standard Blu-ray template) or something else?

Again, I would just stick with the source resolution, which in this case is already BD compliant. Save disc space and let your player do the upscaling.

>
>3. If my source video is 480p and 29.97 progressive, what setting template should I use: 29.97 fps 1920x1080 (standard Blu-ray template), 23.976 fps 1280x720 (standard Blu-ray template), 23.976 fps 1280x720 (standard Blu-ray template) or something else?

In this situation, you can stick with an SD resolution of 720x480 with 29.97fps, but it will have to be interlaced. Or, you can upscale to 1280x720 59.94fps. If you do go with a higher resolution, you can try applying filters such as Contour to help make details sharper.

These are all just suggestions. As mentioned, you can choose whatever resolution and framerate you like as long as it's compliant. I tend to like to keep the source resolution and framerate if I can, but if I have to change it, I like to go higher, rather than lower. If you go from a 29.97fps to a 24 fps, frames will have to be dropped. Going to a higher framerate will allow you to preserve all frames.

Wow thank you tkrave!

1. "If my source video is 720p and 29.97 progressive, what setting template should I use: 29.97 fps 1920x1080 (standard Blu-ray template), 23.976 fps 1280x720 (standard Blu-ray template) or something else?"

'Technically, you can use any template you want. However, I would use something close to the source characteristics such as 1280x720 59.94fps. Using that template will simply double the framerate.'


Sorry for the really dumb question but I have to ask to make sure I get it right the first time. Are you saying that if my source is 720p and 29.97 progressive, I should choose the 1280x720 59.94fps Blu-ray template ? Doubling the framerate in this situation would benefit me the most by using 59.94 instead of 23.976 fps or 24 fps ?

I am just a bit confused. You say choose as close to source characteristics as possible but there is no 29.97 fps for 1280x720 so I should choose 59.94 fps instead for best video picture?






2. "Save disc space and let your player do the upscaling."

So am I right in assuming my blu-ray player will ALWAYS do a better job of upscaling video than Video Mastering Works encoding to 1080p? Is it really that much better or just a small difference between upscaling with blu-ray player vs Video Mastering Works ?

The space saved is not really that big a deal to me. Best video quality output to screen would be what I want.






3. "If you do go with a higher resolution, you can try applying filters such as Contour to help make details sharper."
Should I choose just one instance of Contour filter or do you recommend more of 1 filter at same time.




Thanks for the GREAT advice!

>Sorry for the really dumb question but I have to ask to make sure I get it right the first time. Are you saying that if my source is 720p and 29.97 progressive, I should choose the 1280x720 59.94fps Blu-ray template ? Doubling the framerate in this situation would benefit me the most by using 59.94 instead of 23.976 fps or 24 fps ?
>
>I am just a bit confused. You say choose as close to source characteristics as possible but there is no 29.97 fps for 1280x720 so I should choose 59.94 fps instead for best video picture?
>
Sorry, I guess that is a bit confusing since 59.94 does not seem closer to 29.97 when compared to 24 or 23.976.
Basically, yes, since you can't choose 29.97, I would choose 59.94. Even though it's not "closer" in terms of the number of frames, it will preserve all frame data since it is simply doubling the framerate. As I said towards the end of my reply, if you choose to go with a lower framerate such as 23.976 or 24, frames will have to be dropped and you won't be able to reconstruct them if you decide you need to go back to 29.97fps in the future (unless you hang on to the source file).

In the big scheme of things, those dropped frames will hardly be noticeable, but it's my preference to keep as much detail/frames as possible and stay as true to the source as possible. Doubling the framerate in this case will allow that.

>2. "Save disc space and let your player do the upscaling."
>
>So am I right in assuming my blu-ray player will ALWAYS do a better job of upscaling video than Video Mastering Works encoding to 1080p? Is it really that much better or just a small difference between upscaling with blu-ray player vs Video Mastering Works ?
>
>The space saved is not really that big a deal to me. Best video quality output to screen would be what I want.
>
I wouldn't say a player is ALWAYS going to be better than TVMW5, I'm just saying players do a good enough job and 720p is a high enough resolution that upscaling it manually might not be noticeably beneficial.

Going from 720p to 1080p is not that big of a difference to my eyes, so it's my preference to let the player do the upscaling in that case.
Going from 480 to 1080p is a different matter though, and there's a much wider margin to add in more detail or remove noise with filters.

In the end, it's really up to you. You can try to apply filters to your 720p video and output it as 1080p if you think it'll help.

>
>3. "If you do go with a higher resolution, you can try applying filters such as Contour to help make details sharper."
>Should I choose just one instance of Contour filter or do you recommend more of 1 filter at same time.

It depends on the quality of the source video. I would start with contour as it helps define edges. Smart Sharpen is another filter you can try. You can also try the regular Sharpen filter, but I never really use it. While it is possible to create multiple instances of 1 filter, I've never had to do that. If you think it makes your video look better, then go for it. Play around with the settings until it looks good to you.

Thanks tkrave!


I do understand what you said about keeping it as close to original source characteristics as possible.

But I do have one more question regarding doubling the framerate.

Suppose I don't care about saving space or encoding time but having the BEST video quality is the most important to me.

If my source video is 720p and 23.976 progressive, wouldn't it it be better to choose then 1280x720 59.94 fps progressive instead of 23.976 fps?

Here is my line of thinking so let me know if it is right or wrong. I know that the blu-ray player will upscale the resoultion from 720p to 1080p but I don't think the blu-ray player will double the framerate as well. Since having a 59.94 framerate is much better in term of video quality than 23.976 fps (since there are more frames per second thus producing smoother picture), wouldn't it be best to encode to 59.94 fps for source video that is 23.976 fps as well - to achieve BEST video quality ?

Let me know if I err in my thinking regarding this and thank you

If your source is 720p 23.976fps, your BD player wouldn't need to do anything to it since it is already compliant. In that case, I would output with the same 23.976 fps. Using 59.94 is more than double the framerate and I believe it will do a 3-2-3-2 pattern with the frames (3 identical frames, then 2 identical frames, repeat). I may be wrong about that though. These types of framerate conversions can be confusing.

Doubling the framerate will not product a smoother picture for a 29.97 progressive source because perceptually it will be identical; there is simply two identical frames spanning the time of what used to be one frame.

Yes I thought doubling the framerate would double your pleasure as well but was wrong about it. Thanks for setting me straight about it.

I know all 1280x720 resolutions are progressive but have question whether to set 1920x1080 to progressive or interlaced at output.

At 1920x1080 blu-ray template, I think all 23.976 fps are also progressive (or at least set by default).



But if the output framerate is set to 29.97, I think I can choose progressive or interlaced.

1. Isn't progressive suppose to be better than interlaced so you suppose to choose progressive whenever possible?

2. If my source is 720p and 23.976fps progressive and upscaling, I would choose 1920x1080 23.976 progressive. Is this correct?

2. If my source is 720p and 29.97fps progressive and upscaling, I would choose 1920x1080 29.97 progressive. Is this correct or should it be interlaced? Interstingly, Video mastering Works always sets it to interlaced by default and I have to change it.


Thanks tkrave

>I know all 1280x720 resolutions are progressive but have question whether to set 1920x1080 to progressive or interlaced at output.
>
>At 1920x1080 blu-ray template, I think all 23.976 fps are also progressive (or at least set by default).

Yes, at 1080, 23.976 should be progressive.

>But if the output framerate is set to 29.97, I think I can choose progressive or interlaced.

This should always be interlaced at 1080.

>1. Isn't progressive suppose to be better than interlaced so you suppose to choose progressive whenever possible?

Yes, but be aware of the format limitations; setting to progressive manually may make it non-compliant.

>2. If my source is 720p and 23.976fps progressive and upscaling, I would choose 1920x1080 23.976 progressive. Is this correct?

Yes

>2. If my source is 720p and 29.97fps progressive and upscaling, I would choose 1920x1080 29.97 progressive. Is this correct or should it be interlaced? Interstingly, Video mastering Works always sets it to interlaced by default and I have to change it.
>
At 1920x1080, 29.97 fps is supposed to be interlaced, which is why TVWM5 sets it as that. Setting it to progressive will make it non-compliant.

Take a look at this chart to see what is compliant for a BD video stream:
http://en.wikipedia.org/wiki/Blue-ray#Video

Just wanted to clarify that converting interlaced to progressive is not ALWAYS better. It all depends on how you're doing the conversion. For instance, going from 25 fps interlaced to 25 fps progressive is not a good conversion because you'll actually be losing detail. In that case you would have to double the framerate in order to preserve all of the fields.

If choosing, upon disc insertion, to 'play header track only' (and then proceed to top menu)... is it possible to NOT have that header track then show up in the top menu?

I am creating a DVD with a top menu showing 3 tracks per page (no track menus). However going though the 'source' and 'menu' options I cannot see any way of not having the header track show up as a clickable track in the top menu - I just want it to play once upon disc insertion and then not be accessible.

I can make it 'invisible' on the menu screen with opacity, but it is still 'there' and accessible by the DVD remote.

Thanks for any advice.

Found 'firstplay' track function.

Glad you found the First Play. AW4 has lots of nooks and crannies with stuff in them.

I have not tried it, and it may not make much sense to do so, but one might be able to do manual button routing to skip certain buttons on a menu.

Using TMPGenc Authoring Works 4 I have created a DVD with several imported MPEG2 files as 'tracks'.

The DVD is structured with no 'title page'. The menu screen - or 'top page' - features three tracks or 'play all', with several other similar pages containing the rest of the tracks. There are no chapters created within any of the tracks.

Global Menu Settings are instructed to display the top page upon disc insertion. This happens accordingly when testing on my old DVD player.

However when I try the same disc in my LG BD550 Blu-ray player, the first track begins to play automatically instead of the viewer being presented with the 'top page' menu screen. 'Disc Menu' must be selected on the player remote to access the menu screen.

This is against how I have instructed TAW4 to encode my disc. I will try other DVD and Blu-ray players when I have access to them. In the meantime... any thoughts, or anything else to check?

Thanks in advance.

I have tried all the settings, and despite instructing TAW4 to 'display top page menu' upon disc insertion, my LG BD550 Blu-ray player ignores this completely and launches straight into playing track 1 instead.

This even happens when I create a 'firstplay' header track, and the TAW4 playback simulator correctly plays this first followed by the top menu. When I come to insert the created DVD into the LG player however, it completely ignores the firstplay header track, and the top menu, and instead launches straight into track 1.

I can only assume that since TAW4 was released, certain newer DVD/Blu-ray players like my LG have the technology to override these instructions on the discs and decide themselves how they will react upon disc insertion. The DVD plays just as it should with firstplay track then top menu on my older DVD player.

The only way at the moment I can seem to successfully have the LG player actually display the top menu on insertion is by creating a title page (which I do not really want) - the LG player seems to take notice of this as first thing to display, unlike the top menu without s title page.

The other way is to have a short, blank first track (thumbnail hidden and unlinked on first top menu page) and instruct TAW4 to play this first upon insertion, and then go to the top menu.

Neither of these solutions is ideal. Any ideas...?

I'm guessing it has to do with your LG player and not anything in TAW4. As you said, it works properly in your old DVD player. Try looking at the settings for your LG player.

Also worth checking for possible firmware update to the LG Blu-ray player.

Hello,

I am using T5 to encode Blu-ray and DVD from the same .avi source file. The DVD encoding is taking a really long time on my W7, i7-920 machine with plenty of ram & hard drives...

A one hour file will take 4-5 hours to encode with using the contour & color correction filter. Without the filters it is quicker, but not that much.

When I look at CPU usage I am only getting about 25%. Is there a way to use more cores so I do not have to render my long projects overnight?

Thanks for your help.

It seems like the "Standard encoder" used for MPEG-2 encoding is not as optimized as the x264 encoder, so not all cores are being used. My CPU shows about 30% usage when encoding to DVD-Video. For me, output time is about 1hr 25min for a 1hr show without filters. With color correction and contour, the time was about 3hr 30min. Source file was an MPEG-2 WTV file at 1080i. That was with using CUDA for filtering. Using an i7 2600 3.4GHz, 8GB RAM and GeForce GTX 460.

At first I thought that maybe there just wasn't enough data processing for the CPU to use 100% of its cores, but I tried outputting a 1920x1080 MPEG-2 with a high bitrate and still only get 30-38% CPU usage. However, using x264 for full 1080p output will get 100% CPU usage, so I definitely think there is an optimization issue with the standard encoder.

Thanks for your reply. I agree. mpeg-2 does not seem optimized. Seems like it would be easy to fill up the CPUs!

Does the company read this board? I have sent some e-mails via tech support in the past and really did not hear back. What is the best way to bring this to the attention of the company? 70% of the CPU is a lot to be left on the table.

Although I just learned you can open two instances of T5 at the same time so at least I can encode two files (Blu-ray & DVD of the same project) at the same time. The CPU only hits 60% during this setup.