I am trying to run this program on a brand new win xp computer. With 1gb of ramm and a athlon xp 2300 (i think) cpu. i am havin just one problem, since that computer i only have "user level privlages" (its a shared computer) i do not have access to write to the registry and everytimei run theprogram it says i need to be a administrator to have registry access.. i read earlier that i do not need registry access with the version changelog. so what is the work around to advoid this problem, i have a older version i bought back a few months ago and the brand new trial version. both are giving me the same problem. any suggestions or work arounds to get it to work without regisrty access?

There is No way to use Tmpgenc without it accessing the Registry, it does not Rely on the Registry to run But it does Need to Put a Couple entries into the Registry like so it Knows when the Trial runs out ...so there is No Way around it unless you Know how to Reprogram it not to access the registry but that would be illegal.....

I have encoded a video with audio but when i play back the encoded version i get no sound. Can someone tell me why and how i can solve this?

Go to Post "20069" and that is your answer.....

I'm using this program (CGD2SVCD) to convert some CD+G CD's into SVCD, actually this is only a frontend for 2 programs (CDG2AVI and TMPGEnc).
With the CDG2AVI, I've got no problem, but when it comes to TMPGEnc...

So, what it does is:
The CDG2SVCD, uses some tpr files to convert the AVI file plus the MP3 into a MPEG.
The only way that i know to use convert AVI+MP3 is to enable MUX. The problem is that CDG2SVCD, in some kind of batch, uses the audio file but doesn't include the "mux://", so it cannot convert the mp3 sayin "Unsupported".

Question:
1. Is there any other way to convert AVI+MP3 to SVCD, without enabling Mux?
2. Or can I edit the tpr (text mode) so that in the audio source it could include the "mux://" plus the text that comes from CDG2SVCD?


Thanks

HI!!! Im trying to encode an avi file but wen i do then en result ends up with no audio. wuts going on please help thanx

The Audio in the AVI file is Of a format that Tmpgenc can not decode, Either because you don"t have all the correct Filters and Codecs installed or the audio is Something like VBR MP3 or AC3..You need to extract the audio to a WAV file with something like "AVI-Mux" or "Virtual Dub" then use the WAV file as the audio source...

I've got a 16:9 video on a MiniDV tape in 4:3 format. Naturally everything is squished horizontally to fit. I've dumped this to AVI and am ready to convert to MPEG1 with TMPGEnc, but how do I tell it to fix the aspect ratio? I want to retain 4:3 format (NTSC 352x240). Thanks.

I've got a 16:9 video on a MiniDV tape in 4:3 format. Naturally everything is squished horizontally to fit. I've dumped this to AVI and am ready to convert to MPEG1 with TMPGEnc, but how do I tell it to fix the aspect ratio? I want to retain 4:3 format (NTSC 352x240). Thanks.

If the Image Looks all squished and all you want to do is make it look Normal But still have the 4:3 aspect ratio then try useing the "Clip Frame" and "Video arrange method" settings in the "Advanced Settings", with it you Can strecth the Image so it looks normal or at least better and you can change the way the Picture looks in the Frame..Just keep the Output aspect ratio set to 4:3....

I had a look at the Advanced Settings but I don't see how I can use Clip to stretch the image into shape... remember that the image is already full-screen, so I can't clip anything or I will lose material. I basically need a resize command to push the top and bottom of the picture towards the middle... but I can't see anything like that in TMPGEnc...?

No need to use the clip frame setting. The solution is very simple.
Under the 'Advanced' tab choose '16:9 display' as the source aspect ratio.
Set the Output aspect ratio to 4:3 and the 'Video arrange method' to 'Full screen (keep aspect ratio)'
This will resize the image to the correct shape.

Check the result using File>preview.

ASHY

Thanks Ashy -- I set 16:9 as the source aspect and Video Arrange Method to "Full Screen (Keep aspect ratio)" and all was well. :)

But two questions:

(1) Set the Output aspect ratio to 4:3 -- I didn't see this option anywhere?
(2) Check the result using File>preview -- I didn't see this either?

Anyway, like I said it worked even though I didn't do these two things, but
I'm curious as to where they are...

Are you joking?
The preview option has been there since TMPG was born.

Open TMPG then at the top left corner click 'File' then a menu will pop up. Here you will find the 'Preview' option. Click it and up will pop the Preview screen.

The output aspect ratio is located under the 'Video' tab

ASHY

Hi Ashy,

I always use TMPG in Wizard Mode, hence my misunderstanding about File>Preview. ;)

As for Output Ratio being under the Video tab -- all options under the Video tab are disabled, with only Motion Search Precision enabled. I assume this is because I am encoding to MPEG1.

Paul.

You can easily unlock the setting or all settings by either clicking where the setting is itself and choosing unlock or load the unlock.mcf template in the 'Extra' folder located in your template folder.

ASHY

Hey everyone,

I'm trying to place TMPGEnc Plus encoded mpg's into MS powerpoint presentations, and i'm having mixed success....

on some computers the videos play just great, but on others all i get is a screen of junk in powerpoint, while on that same computer i can play the video just fine in media player....

what am i doing wrong?
~Mike

This seems like a Power Point Issue...

Hi..

When i convert divx to vcd, the finished result isen't optimal coz the video stops sometimes and the audio goes on and then sometimes the video goes faster to catch up to the audio, then its ok for a while and then the same again and again.... sometimes i use virtuadub when it's nessesary..

My setup is :
900Mhz Athlon Thunderbird
Asus Motherboard
256Mb Ram


Beef..dk!

This Sounds like A Sure sign of Bitrate Spikes,What is Happening is the Bitrate Jumps Too high and the DVD Player can not spin up the Disk fast enough to read the Increased data Rate ,so you see the Video slow down then it speeds up when the Disk has a Chance to speed to the speed it needs to read the data , ..What Bitrate settings are you useing??? You can Probably minimize or eliminate this effect By changeing your Bitrate and Rate controll settings..

Ok sunds like it!

I will try to adjust the bitrate....

else ill get back to you, thanks a bunch!

Regards Beef, Denmark

I documented my experiences with tmpgenc and other programs on my personal webpage and thought I would share its existence here.

Please come by and tell me your experiences and rate the products you have tried.

----------

My Dvd authoring experiences and program ratings:
http://www.thepeters.org/dvd_authoring.htm

Come by and share your experiences

anyone?

download ac3tool from digital-digest, encoded to wav file and then use tmpgenc to encoded to mp2.

Get a program called Headac3he. Perfect for what you are asking to do. Lets you convert to wav, mp3, or ogg-vorbis in CBR or VBR audio.

It also lets you convert to MP2 as you wanted.

thanks guy

Unfortunetely the program doesn't work correctly for most of the time.

ASHY

Ashy you mean headache3he? what i did was using virtualdubmod to save it as ac3. then used besliced to fix the file header. then i copy the parameter i set in besweet gui to besweet command line version & encode it to wave/mp2....

Yes I'm referring to Headac3he.

Jaysus what a lot of faffing about you seem to be doing.

Where is the Ac3 located? In an AVI or a VOB?

If it's AVI then AVI mux can extract the Ac3 directly to a wav.
If it's a VOB then VOB2AUDIO will extract it to a wav.

Then to encode to Mp2 at lightening speed use MPEGDJencoder. This app encodes a 2 hour wav to Mp2 in about 3 minutes or you could just use TMPG to encode the wav to Mp2 in about 25-30 mins.

ASHY

THANKS ALOT ASHY !!!! btw ac3 is located in avi

Hello everybody,

I use Tmpgenc with a processor Amd xp2000+ and W2k pro (Os).
After a few minute (5 or 10 mn) Tmpgenc cause a system hangup ( no message and black screen) and i have to restart the computer.
Does someone have an idea for this issue ?
Thanks.

me gustaria saber como bajar la vercion mas reciente de tmpgenc quisaiera que me dijieran ok

If you have more than one stick of memory, try it with
just one stick of memory in it.

anyone?

Easy, if you have an AC3 audio file you can use "Headac3he" to encode it directly to Mp2 audio...