Im having a strange problem when trying to convert an avi to MPG1. I set the bitrate to 128, and when the conversion is done, the file size is about 200 megs(video is about ~20 min.), and real1player says, that the bitrate is 1395Kbps?
Is this a bug in TMPGEnc, or am I missing something?

Well a Bitrate of 128kbs is WAY WAY WAY WAY TOO LOW for a Mpeg file unless the Resolution is Really low like 36+24 and that is a Really small image...and if you are useing the 2.59 version there is a Bug in it that if you are encodeing to VCD then it will not let you lower the Bitrate lower than the VCD Standard of 1150kbs...and if you are useing a Different version and makeing a VCD then you have to set the "System" setting to "Video-CD Non-Standard" or it will pad the stream to make it VCD Compliant.....

Hi,
i would like to combine two avi files. Wich program is the best for this ( because the video should be good quality).
Is it possible with tmpgenc ?
Thanks.
Greet¡­s
Videofreakazoid

If you Just want to Take 2 AVI files and Turn them into 1 Big AVI file then this isn"t the Software you want..You need something like "Virtual Dub"....

i am getting error

File"c:Program FilesKazaaMy Shared Folder[tmd]empire.(eso).proper.ts.(1of2)real deal.avi" can not open, or unsupported.

but am able to watch movie. Every time I try to open an avi. file I get this error.

search the forum......

I am using version 2.59 and encoding AVIs from kino 0.6 (linux) to DVD format.
The AVI seems to be fine, but the .m2v file and the multiplexed
.mpg files that result occasionally repeat a frame. The files seem
to have the same number of frames as the original, but the playback
is jerky when the frames repeat. Otherwise, the encoding is excellent.

Source DV camcorder NTSC 29.97 Video 8000 CBR, 48000 audio.

I have tried encoding with many different options, with both type 1 and 2
AVIs, on two different machines under Win98, Athlons one with sse, one not.

Also, it seems to not be able to read a sequence of files zzzz001.avi,
zzzz002.avi, ... that exceed 2 GB. It only sees the first 2 GB of files.

Does any one have any suggestions? I was about to purchase the package, but
these are problems. I can get around the 2 GB limit, but the repeating frames
seem to always happen, just at different times depending on the options.

Thanks.

Further info:

If I select the .avi file and go into a filter window, say, sharpen image,
and use the scroll bar to get to the area where the frames seem to repeat,
it can get into a mode where clicking the right and left arrows at the end
of the scroll bar cause the frame number to change at the top of the screen,
but the same frame is displayed. This only happens for one frame. Clicking
the arrow twice changes the frame number twice and the frame only once.
Clicking again counts up frames and images correctly. This is using the
directshow multimedia file reader. It is the same in the latest version.
It also seem to think that there are two more frames in the file than
there are. If I uncheck the directshow file reader no other standard plugin can
read the file. Is there a better plugin to use?

This sounds like a field order problem.
Reverse the field order to the one you have set.

ASHY

The file is interlaced and I would easily see if the field order was wrong.
(I have made that mistake before!) It seems to have something to do with
the machine it is run on. It does work correctly on another machine that
has had directx updated for games. The problem is on a machine that runs
win98 under Linux using win4lin. It also works in wine, and, almost always,
wine is much worse than win4lin, as the latter runs real win98 in a virtual
machine with real Microsoft code. I have posted on a win4lin mailing list,
as someone has apparently gotten it to run there. I think it is not a bug
in Tmpgenc, but in the directshow support in win4lin.

Thanks for the reply.

I have the latest version of tmpgenc and when i tried to enode an avi file into mpeg, the video is there but there is no sound. I know what the problem is, it's that there is no audio source. When i went to add the .avi file as the audio source, it wouldn't allow me to use that file as the audio because it was "not supported" by tmpgenc. This doesn't make any sense because I tried it once before, and yes, it did work, the sound and video both came out perfectly. I've tried to rip the sound off the avi file as a .wav and then use that as the source usin tmpgenc itself, and virtual nub as well, but that didnt work out as well. Any and all help would be greatly appreciated. Thanks.

What do you mean "It Didn"t work Out well"??? If the audio in the AVI File you are trying to encode is AC3 then tmpgenc will not encode it, so you would have to extract it to a WAV file, you can use Virtual Dub But Virtual Dub Just de-muxes the AC3 audio and Puts a WAV extention and a WAV header on the AC3 file so it really isn"t a WAV file it is an AC3 file with a Wav header and extention so what you have to do is re-name the WAV that was extracted by Virtual Dub Back to AC3 then use a Command Line Program called "AC3 Fix" it will Mave the AC3 file a Real AC3 file then after that you have to load the AC3 file into a Audio encoder that Supports AC3 audio Like "Headac3he" and encode the AC3 to either wav that you can encode in Tmpgenc or to MP2 that you can mux with the encoded Mpeg Video File...This is a Bit of a Bitch to do But that is what you get for Useing Files with AC3 audio ,That is if the audio format in your AVI file is AC3, if you load the AVI file into "Virtual Dub" then go to "File" to "File Information" and if it says that the audio format is "Unknown" then it is AC3.....

I tried opening the ac3fix file, but it opens the command line window, then closes it really quickly. How can i fix it? Im running WinXP Pro. Thanks again!.

Seeing as it is a Command line Program you need to open a Command prompt, then type in the Path to were the AC3Fix.exe file is, then it will give you instructions on How to open the AC3 file in it...I think?

I tried opening the ac3fix file, but it opens the command line window, then closes it really quickly. How can i fix it? Im running WinXP Pro. Thanks again!.

No such luck, i type in the path, and this is what appears...

E:/Documents and Settings/New>Desktop/ac3_fix03/ac3fix.exe
ac3fix V0 3

Removes bad frames from .AC3 files
Usage: ac3fix <infile> <outfile>
Error level returned:
0: No bad frames found
1: One or more bad frames found and removed
2: Error in execution

Then i tried entering the path of the .ac3 file, and it said that it could not open the file.

I tried to get it to work also and Didn"t have any luck either..I don"t work with AC3 audio much cuz Of these Problems, It is easy to do if the AC3 is in VOB files from DVD"s But in AVI files it is Much more difficult..The Only other thing that I can think of is supposedly if you Install the the "Tsunami Filter Pack" then you can encode AC3 files with Tmpgenc But I have tried it and it did not work, another thing is to try to demux the audio with "VirtualDub_Mod" they say it can handle AC3 audio But It still didn"t work for me, and another thing that is supposed to work is to Demux the audio from the avi with a Program called "AVI-Mux" it is supposed to be able to demux and decompress the ac3 in an AVI file to a WAV file But I haven"t been able to get it to work..Then I guess you can use an Dolby Digital Encoder/Decoder like "Digigram" But it is Hard to find , But if you e-mail me I"ll send it to you, I don"t know if it will work on the AC3 file that you extracted with Virtual Dub But it might..Sory that it is so Difficult But AC3 is just a Hard format to work with and I hate it with a Passion and One of the Many Reasons why I don"t use files downloaded off the net.....

AVImux can easily handle this as long as you use it correctly. Why someone should have a problem getting it to work I don't know because it is so easy to use. Search this BBS for 'AVImux' for info how to use it.

If that doesn't work then you can download Goldwave and load the AVI file into that then extract to a wav file. You will need to install this Ac3 filter first.
http://pkmovie.com/jsboard/data/tip/files/20020605104138/AC3filters.exe

ASHY

I don't know too much about Dolby Digital 5.1 or DTS 5.1 or DTS enhanced...hehe...it's all mixed up. Anyway, I was wondering if it is possible in TMPGEnc that you make a VCD/SVCD with Dolby DIgital or DTS...surround sound?

TMPGEnc can multiplex MPEG with Dolby AC3 strem, but not with DTS, and also it can't encode Dolby or DTS.

Further more, (S)VCD should have mpeg audio or it's non standard...

I don't know if my source file has AC3/Dolby/DTS/MPEG Audio (what's the difference?!)... So you mean that if my source file doesn't have one of the above, then you can't have those audio? My source file has 480000Hz Stereo...what does that mean???

48000hz is the Frequency of the audio, it has nothing to do with the Format, your Source File can Have any audio format But Tmpgenc will Not Encode the audio if the audio is Dolby Digital AC3 or DTS, you have to use a Seperate audio encoder to encode the audio to a Format that Tmpgenc Can encode...SVCD"s and VCD"s have to have Mpeg1-Layer1/2 audio or they won"t play on your DVD Player, tmpgenc will encode the audio to Mpeg1 layer1/2 audio But the audio you load into Tmpgenc has to be of a Format that Tmpgenc can decode and Dolby Digital and DTS are not one of those formats....

So how do I make an SVCD or a VCD have Dolby or DTS?

I allready said in my last post that You Can"t...Well you Can But your DVD Player will Not Play it with audio...The VCD and SVCD specification Calls for Mpeg1 Layer 1 or 2 audio and any Deviation from this will Make the File Non Compliant and will Not play the audio..You can try it But I gaurantee you that it will Not work, Very very Very Few Players will Play SVCD"s with Dolby digital Audio and No Players will Play SVCD"s with DTS...If you want to Have Dolby AC3 or DTS audio you will Have to Make a DVD.....

I downloaded a 50-minute AVI file and it's in great quality! I want to fit it onto 1 CD-R that is 700MB/80MIN. What bitrate settings (as well as other important settings) should I use? Also, does it make any difference if you make VCDs on CD-Rs or CD-RWs? My DVD Player can play both and I happen to know that CD-RWs are erasable...

If you are Makeing a VCD and want to Get the Best Possible Quality then you will need to make a Non-Standard VCD and raise the Bitrate to about 1850kbs, this should give you a Mpeg File about 750mb-800mb,(you can fit 800mb on a 700mb 80min CD-R in VCD Format)as to useing CD-R"s or CD-RW"s that is up to you, a CD-R generally will have more space on it 700mb as opposed to 650mb and are Cheaper, But if something goes wrong then a CD-RW would be best, so what you can do is Burn it to a CD-RW and if it works fine then You can burn it on a CD-R and save the CD-RW for next time...

when i go to add video source i get a message tmpgenc12 has caused an error in kernel32.dll and will now close . what do i need to do now to fix that problem
then it says d2v file isnt supported

First You should update to a Newer version..The reason you are getting an error when loading the D2V file could be a Few different reasons, First you have to Make sure you have the DVD2AVI VFapi Plugin Properly installed...you should go to "Options" to "Enviromental Settings" to "Vfapi Plugins" and see if there is a "DVD2AVI.vfp" Plugin Listed there, and if there isn"t one listed then go into your DVD2AVI Folder and copy and Paste the "DVD2AVI.vfp" file into the "Tmpgenc" Folder..Now the Plugin Should be Installed..and you have to remember that you can not Delete or Moove or Re-Name the "Vob/Mpg" files that you made the D2V file from untill after you have finnished encodeing..and if all else Fails Try Makeing a New D2V file..

When decoding from AVI to mpeg1 the video is fine but the sound is missing. I downloaded the latest version but still no luck.The system (sound + video) box is checked.Should it possibly be the se(sound + video).Don't want to pay for this until I know it will do what I need.

Certain Audio Formats are Difficult to Decode unless you have certain Codecs and/or Filters installed and even then it doesn"t allways work..So what you have to do is Extract the audio from the AVI file to a WAV file with something Like "Virtual Dub" then use the WAV file as the audio source in Tmpgenc...

I looked through all the messages but have not seen my problem.
When encoding from AVI-DivX to MPG-1 VCD the video freezes, audio continues with no error messages. The AVI plays just fine though the point that it freezes during the encode process. If the AVI were corrupt at the freeze point, wouldn't it stop playing ? Is there any easy way around the problem ?

Thanks -

Sorry for the almost same post as another user.

There is a Little Tool called DivX-FiX that is supposed to fix Frozen Frames in a DivX file, Maybe that would help you ..Look for it on a Search engine...

I just had this same issue. this guide explains how to correct Divx/Xvid avi's with bad frames in them so you can load them into TMPGenc and encode properly

http://www.vcdhelp.com/forum/userguides/135552.php

Goodluck

Thanks for your help. I'll look for Divx fix and let you know what happens.
Thanks again.

DivX-FiX worked great ! It was simple, easy to use and fast. Thanks again for your help !

Hi.
I got a error message.
What does it mean?
What happens?

It sais : -537403781 197008

Before the completion of converting an avi file I was forced to stop the process and save the file which was about 1/2 completed. I cannot reload the file and continue the process. Will I have to start the process over again or is there a way to load the saved file?
Thanks to anyone who can help.

Find out what the last frame was that was encoded then use the source range feature to begin encoding from the next frame after that.
After completion join the 2 parts with the merge&cut tool in the MPEGtools.


ASHY