This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
I got about 150 avi movies on my HD that i want to convert to vcd's . But when i do this i keep getting frame skips or a frame hitch ( dunno how you call it ) but the image is not fluent. Can someone explain me how i can get the image fluent , i am using tmpgenc now.But if someone has advice about using another program plz let me know. If you know how to solve this can you also explain how i have to do this.
Well the answer to Why you are getting the "Jumpt Playbeck" is in the Title of your Post...Tmpgenc Can"t properly convert Frame rates ,there is an AVISYnth script command that is supposed to convert the framerate for you while Frameserveing..and there are Programs that do NTSC/Pal conversions Like "ProCoder" and "Advanced NTSC/Pal Converter" But you would be better off useing AVISynth cuz it would be much faster....
Non, no, no, TMPGEnc can handle this perfekt. It's a trick to know how. There's no need to do a Framerate-Conversion. That's because you can handle this the same way, DVD-Producers do: PAL-Speedup.
If the AVI is a Film with 23.97 FpS, open it in TMPGEnc.
Choose PAL als Videoformat (25 FpS)
Select Advanced, select Do not Frame Rate Conversion
Encode the Video.
Wrong, TMPG CANNOT handle this perfect. Selecting 'do not framerate conversion' will indeed produce a PAL movie with 4% speedup, but the audio WILL lose sync.
The movie will be speeded up to play at the faster 25 fps and will become shorter, but the audio length stays the same causing de-sync.
This can then only be remedied by shrinking the length of the audio to match the duration of the Video with Cooledit or similar.
The easiest way and produces pretty good results without the associated jerkyness is to use AVIsynth.
AVIsynth uses a method very similar to professional framerate conversion techniques.
Yeah, forgot this Audio-Thing. But i don't use AVISynth for that, because it speeds up the Audiopart too. That's why i'm using WAVELab to do an inverse Timestretch. That's much better, because the Sound sounds exaktly like the Original.
AVIsynth doesn't alter either the Audio or Video length when using the CONVERTFPS command, but uses other techniques to create a smooth conversion whilst keeping the movie the same length and thus the audio in sync.
I just replaced the older version with this and thought this will be better.. :( but no.. When I set the video bitrate + audio bitrate it makes bigger files than older version with the same values (about 50Mb bigger). Even if I change the bitrate values it still makes same sized files... strange.. what causes this???
video audio
1140 160 48000 = 843Mb
1135 160 48000 = 843Mb (??? this is weird)
I have always used batch mode successfully. Recently, whenever i leave it on over night, i come back to find that TMPGEnc has closed and none of the movies have been encoded successfully. Any ideas?
> Recently, whenever i leave it on over night, i come back to find that TMPGEnc
> has closed and none of the movies have been encoded successfully
Acts like some sort of buffer overflow that kills TMPGEnc, right? Was happening to me. I was also getting lots of "Read error at..." messages that would end the transcoding. Very annoying. What it was...
I installed an old, old, DVD authoring package. It installed its own ancient mpeg codecs, wiping-out the cyberlink ones from PowerDVD XP. PowerDVD worked, but TMPGEnc wouldn't for long.
I re-installed PowerDVD. TMPGEnc transcodes again! Life is good.
Can somebody, if possible somebody who has access to the source code, give me the /exact/ definition of what the "Output as basic YCbCR, not CCIR601" option does in both of its states?
Especially, does it scale luma/chroma values, and if yes, in which of its states? Or does it only clip values when unchecked?
This affects the range of values accepted for luminance and chrominance signals. YCrCb is raw samples, taking the range 0-255. In TV systems CCIR601 is normally used, which restricts the allowed range to 16-235 for luminance and 16-240 for chrominance signals. If you are mastering for TV (e.g. VCD, SVCD, DVD) then do not tick this option.
1.) Not ticking it throws away Y values below 16 or above 235, but leaves the others alone, and similarily for chroma?
2.) Not ticking it scales down the luma input values so that 0 becomes 16, 1 becomes ca. 17, etc. and 255 becomes 235, 254 becomes ca. 234 etc.
3.) Ticking it will make TMPGenc leave all the values alone.
4.) Ticking it will make TMPGenc scale up the values, so that 16 and below become 0, 17 becomes ca. 1, 235 and above becomes 255, 234 becomes ca. 254 etc.
It depends on your input. If you are using DVD2AVI you have the option to output to TV or PC scale. TV will be 16-235 and PC 0-255.
If you are encoding for TV then the scale should always be 16-235 otherwise, and you can test this yourself, the picture becomes slightly darker, blacks become dark grey and whites aren't quite white, colours also seem to be become slightly deeper.
Your TV expects 16 to be the lowest value for black, use the 0-255 scale and 16 won't be quite black when outputted to you TV, but as I have said dark grey the same is true for white.
If you don't tick then all values will be correct for TV.
I suppose the choice may partly be down to personal preference, but if you want my advice and the correct scale for TV then you should be using CCIR601 for all your encodes.
ASHY is nearly right. But DVD2AVI is a little Buggy.
You have two Options to Choice:
PC- or TV-Scale
YUV 4:2:2 or RGB
The different Combination of those two gives completely different Outputs.
RGB + TV-Scale gives a darker Picture. So it depent's on the Settings, if CCIR or YCbCr is right.
If you are not shure, how to handle this, use always CCIR. Better to dark then to bright (and Off Standard).
I need to convert some quicktime MOV files to mpeg format. I have found some references on forums stating that there is a TMPGenc plugin for Quicktime that allows TMPGenc to convert MOV files to mpeg.
Can you please advise
1. if this is correct?
2. The name of the plugin?
3. where to get the plugin?
You can get the Quicktime Mov Plugin in the download section of "www.vcdhelp.com"...you can easily find it elsewere if you look on a Search engine.........
Can somebody, if possible somebody who has access to the source code, give me the /exact/ definition of what the "Output as basic YCbCR, not CCIR601" option does in both of its states?
Especially, does it scale luma/chroma values, and if yes, in which of its states? Or does it only clip values when unchecked?
You Can"t register the "DEMO" version..You have to download the "Plus" version..You can get it By Clicking the Banner you see at the bottom of this Page..Once you install it you will find were to Enter the Number...
This error Is Cause By Bad Or Corrupted AVI files..Usually with Files downloaded Off the net..There is no real Fix for this accept you can start encodeing were it crashed useing the Source Range and Join the 2 parts together with the Merge & Cut....Or you might try Frame serveing the file to tmpgenc ..
I have been trying to encode an mpg file to mpg1. WHen I tried it the first time I got a message saying that TMPGEnc needed to download QuickTime Authoring. Every time it tried it said it was corrupted, try again.
It's always corrupted is there anywhere I can manually download it from and what is the file called.
If I try to encode the file without the download TMPGEnc either stops responding or produces a file with no sound.
This is wierd..You do not need Quicktime to to encode Mpeg to Mpeg But you do need it to encode "Quicktime MOV" to mpeg...So Maybe the file you are trying to encode isn"t a Mpeg file but a Mov file???? since This problem is so wierd I don"t really have a Solution for you....
I think it's something to do with the sound encoding. TMPGEnc says it isn't a valid audio stream if I try to demux it.
I have the Quicktime plugin and can convert .MOV files (though without sound, hmmm) so I assume the authoring is a different plugin or whatever.
Strange thing is Winamp 3 will play the original but the sound turns into a loud hiss after the first couple of seconds but MS Media Player plays it OK.
Well you Can extract the audio to a WAV file, if it is a Mov file then you can use "Sound Forge" to do this , then you can encode the Wav file as the Audio source...
After converting a DVD to SVCD (using the SVCD Movie Template) and then burning it to a CD-R, the movie play well if it wasn't for occasional frame skips. It's if the movie is fast fowarding by a second or two from time to time.
Can anyone help me solve this problem ???
Thank You.
Do mean that the Video seems to Speed up or slow down Just for a second once in a While??I believe that this is Caused By sudden Bitrate spikes in the encoded Video wich Makes the Drive in the DVD Player have to suddenly speed up But the drive can"t speed up fast enough..This is a Dual Problem, a Problem with Tmpgenc Haveing Bitrate spikes and a Problem with the Drive in your DVD Player Not being fast enough to compensate for the Bitrate spikes...I don"t really know of a Solution for this accept Maybe useing a Lower Bitrate or a Encoder that doesn"t spike the Bitrate, or get a DVD Player with a Faster Drive in it....