This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
I'm using Tmpgenc to do a large number of conversions from the Divx format to NTSC VCD format. If I add a good number of projects to the Batch Encoder and let it run overnight, I find that the program has unexpectedly closed itself. No error message. It always happens after a file is finished converting, and it usually happens after only a few files were processed. When I open Tmpgenc again and take a look at the Batch Encoder window, it still says "Working" under the last item processed's status tab. Any ideas what I am doing wrong? Could this be a bug?
This happened to me once but the reason was that I tried to encode into the directory that didn't exist (it remembers the last directory used, and I deleted it since the last encode).
Hope it helps.
Unfortunately, that does not seem to be the problem. The directory does exist, and previous files encoded there properly. Then it just stops. Quite annoying.
I have the same problem. It will do ONE file (I am batching with sequential files as one movie option) and when finished with one, it will sit there and not respond. When reloading the "working" is there as well. If I don't do the sequential, it works fine (but the sequential save me massive time!). I have plenty of mem 512k 1.8 GHZ and over 20 gigs of hd space. Any suggestions?
I recently reformatted and reinstalled my OS (Win2K) and after reinstalling TMPGEnc 2.59 I am no longer able to completely finish encoding mpeg2 files from AVI files that I created. I get the following error:
Read error occurred at address 00481AA5 of module 'TMPGEnc.exe' with 06C94CA8
(The address numbers vary)
MPEG1 files encode perfectly, without any trouble. I've tried different AVI files, all of them experience this error when converting to mpeg2. Prior to reinstalling Windows I was able to encode these same AVI files just fine.
The time it takes for the error to occur varies, even with the same AVI file. Sometimes it's 5 minutes, sometimes it's after 1 and a half hours, but it never gets beyond 25%.
I have tried setting the priority of the Directshow filter to 2 and the rest to 0 like Ashy has described in other postings similar to this.
This is very annoying because I've used TMPGEnc dozens of times without any problem.
Are you sure that you reinstalled SVCD codec, too?
It looks like you are trying to reencode into the format you don't have the appropriate software for.
MPEG2 requires SVCD codec to be installed prior to any viewing or conversion.
If you reinstall OS, your codec is gone which means that you must install it again.
I'm not sure what you mean by SVCD codec, unless you are talking about the mpeg2 codec in general. I do have Cyberlink PowerDVD XP software installed to plays DVDs.
The job of TMPGEnc is to encode mpeg2 not decode it (which is what the PowerDVD software does). I was under the impression no additional software was required to do that.
I've been having this exact problem. Seems that there are alot of 'dodgy' frames in downloaded movies. Try frameserving to TMPGEnc with VirtualDub ... I got alot further with this, but it still gave the error in the end!
Finally had sucess by encoding it with Panasonic MPEG 1 encoder though!
Cheers, THM
Try scanning the movie for bad frames with Virtualdub. If it finds any you have the option of masking them. This will replace a bad frame with a blank one.
I don't understand how just by reformatting/reinstalling my OS the AVI files that I personally created (through DV, no "downloaded" files) which encoded fine in TMPGEnc before, now are giving me these error messages.
Also, the same AVI files which give me the error messages encode just fine in TMPGEnc with mpeg1. For example, if I batch two jobs for the same AVI, the first job mpeg2 and the second job mpeg1, the mpeg2 job will stop at some point, but then it will perform the mpeg1 job for the same AVI just fine.
Also, the points where the crashes occur are NEVER the same, they are always different. I would think if it was a bad frame, it would always crash at the same place.
I will continue to try different AVI files (my personal ones that I created) and test this issue further.
Perhaps the codecs that come with PowerDVD were replaced by something you installed afterwards. Un- then re-install PowerDVD. Let us know if that works.
I created a highlight basketball film and it looks great except for the titles which seem to block fade or stutter. They arent smooth and there are beeps in the audio. If I put a little video behind it they seem to work fine but i am unable to have a black or transparent background with white titles fade nicely like they do on the computer. When I watch the mpeg2 file on my computer it seems to play ok, but when I put onto a DVD using DVDit 2.5 PE it doesnt work correctly. At first I thought it was DVDit but I then encoded the same video in Cleaner 5 (which is terrible) the titles played fine. They faded nicely with no beeps. I hope this helps find the root of a problem.
Thanks, Alex
I converted DIVX movies to two VCD discs. When making the MPEG files for VCD I use Visualdub for the sound. I use the template for PAL VCD that comes with TMPG, but when I playback the movie it does not move smooth. It looks good, but when you get a scrolling picture (like arial view) you see that after maybe 1 or 2 seconds the moving stops for a very short period. First I thought I have to burn the VCD (with Nero) on lower speeds, so I burned one movie at 1x. Still no better movement.
Sounds like you have encoded it to a Different Frame rate than the source file..Your Mpeg file has to have the same frame rate as the source AVI file...
Im kinda a newbie here and i hope some of you guys can help me..
I normally use Pinnacle's Fast Silver editing tool.. but id like to try to make a dvd for a change.. I can output a M2V file from my Fast Studio software.. i also get two .wav's with left/right audio channels..
How do i get from here to having a DVD file that i can burn?!
When i use the Wizard it says that M2V isn't supportet.. could this be true?
An m2v file is an MPEG2 stream without audio. As long as it is in the correct format, such as framesize and framerate and GOP size you may be able import it directly into DVD authoring software. http://www.digital-digest.com/dvd/downloads/authoring.html
Still trying to find out why some DVD's vobs cause buffer underflow.
Dr. M reports following about the vob, which multipelxing with Tmpgenc results 200.000 s packets buffer underflow:
Can anyone tell the meaning of it? (below)
Looks like there is only bitrate changed compared to old ... but what is old? "Old" must be something inside vob as there is no ifo or other files.
Examination for W:ess_1_5.vob (Extract only as it's a repeative error)
=====================================================
Looking for missing or duplicate frames
and for incorrect GOP and sequence headers.
Verifying timestamping and TimeCode values in GOPs.
Checking that the mux rate and bit rate are within 10%
of claimed mux rate and bit rate respectively.
Looking for non-mpeg bytes before the first startcode
and after the last startcode.
Verifying that the MPEG starts with a Sequence Start,
and ends with a Sequence end.
===
* Stack size limit reached on error stack.
* Video Sequence parameters changed @ 1171492.
(Old: 0- -1 : 0 SEQ 720 x 480 (interlaced)
dsp asp ratio= 3/4 (720*540)
frame rate = 29.970 frames/s
bit rate = 3254800 b/s
min buf size = 229376 bytes
constrained = false
IQ matrix = false
non-IQ matrix = 16 17 17 18 18 18 19 19
19 19 20 20 20 20 20 21
21 21 21 21 21 22 22 22
22 22 22 22 23 23 23 23
23 23 23 23 24 24 24 25
24 24 24 25 26 26 26 26
25 27 27 27 27 27 28 28
28 28 30 30 30 31 31 33
help
ive just used the programme to convert a divx file to a mpeg however once it was done there was a few seconds of sound but then it stopped and there was no sound throughout the rest. whats wrong????????
Extract the sound into .wav file with VirtualDub, make sure that your newly created .wav file has sound (ie, doesn't suddenly disappear) and try again by selecting it as source audio.
I download loads of films using Kazaa. I wanted to put these in VCD or SVCD format so as to free up my Hard Drive. When I use TMPG Enc I am using the same source *.avi file for both video and audio. I get great quality video encoded in bout 4hrs but there's no sound. Do I need to extract the sound from the *.avi file first and when I choose my source video and audio file make the *.avi file the video source and the *.? file the audio source.
Quite a few of the divx films on kazaa have mp3 variable bitrate audio.
TMPGenc only supports constant bitrate try using virtualdub to extract the audio to a pcm uncompressed wave file then select the wave file in tmpgenc.