I need to add another link to my TITLE PAGE as to link to extras page etc can this be done in TAW6

Thanks

If you create a note page for the top/track page that has a title page, it will automatically create a link to the note page on your title page.

VMW7 is a great piece of software however a niggle I have is when dropping a number of .ts files into the editor. Each one has to have the "Finish" button clicked. I don't want to do that x number of times! If I drop a load of .mpg or .mp4 files they just get added, no extra button clicking. Please let me do that for transport stream files.

Hi

I'm trying to cut 'x265/HEVC' '.Mkv' files.
All the files I've tested, regardless of being 8 or 10 Bit Main take a very long time to load and when the editor opens, skipping takes ages .. somtimes over 1 minute to jump 5 Minutes forward. I also remuxed the files to '.ts' to see if it's the format but that does not change a thing

While skipping, the GPU (I'm using GPU Decoding) is going up on 50%. If I use CPU Decoding the CPU goes to 100%. Scrolling 1 frame back and forth works.

It looks like it decodes the movie always from the beginning, as skipping to somwhere at the beginning of the movie is much faster (10 seconds) then at to the end (>10min)

Has anyone ever used TMPEGENC 5 for editing HEVC/x265 mkv files, longer than 5 minutes.

I filed my Bug report 2 Months ago and I have not heard back from them ... I start thinking that the software is basicly unable to do so !

I don't work with those file types so I can't say. Have you tried contacting them directly about this?

Still no response for them

HELLOOOOO

I filed one with them directly and send test files ... but
If I write them I get a "it's under investigation" ... for 5 Months ?

@Florian Gamper. I sent you an email but you didn't reply. The problem lies with the H.265 encoding. It seems that Smart Renderer 5 cannot handle the x265 codec even though it claims it can. I have had to rencode all of my 4k H.265 video files to H.264 and now they all work flawlessly in smart renderer 5.

I'm not exactly sure how reencoding HEVC Videos to h264
helps editing HEVC Videos. I want this codec and TMPGENC claims to be able to SmartEdit it.

BTW. Last version no can handle HEVC 8 Bit files. 10 Bit still broken.

Oh, and even funnier, The Video Engine seems to be capable of doing it,
As the Video Mastering Suite 7 has no problem properly opening a 10Bit HEVC file.
But it cannot smart render the cut's :(

It's now over a year since I filed the bug and nothing has been done
Very Sad

I export the file in a mkv container with sound in flac format. On a pc, the file plays normally. Hardware media player "Dune Smart D1" does not play sound in this file.
Tmpgenc creates non full compatible flac file. I tried export elementary streams and reencoded this “flac” file again "flac" format using another program and mixed it using the Tmpgenc “Advanced Tools”. This file now normally playing hardware media player.


sample files
https://drive.google.com/file/d/11WgTYY2d7NVNGuErjBiP-FAvMqstRzuq/view?usp=sharing

https://drive.google.com/file/d/1DFPa-azlmHR59TJcIAxr5Hvj4KVTr9cb/view?usp=sharing

https://drive.google.com/file/d/1M1HtpuoC13xZs_4rCVSwAC8OpZurQaX8/view?usp=sharing

"Please excuse my english."

As soon as I open the program it crashes. I've attempted to reinstall it to a different location, cleaned registry of all entries and it continues to crash upon opening. I'm using Windows 10 x64, i7 4790, plenty of hard drive space gtx1080ti. The program was working fine until I rebooted the computer one day.

I do a lot of 4K/UHD editing and encoding with the plan to transfer the outputted files to a UHD Blu-ray once they become commercially available.

I have requested an option for a UHD Blu-ray compliment output file, but just get a generic 'we have passed you request to the development' message in reply - surely this could be added, budget software DVDFab UHD Creator supports it.

My question is, can you configure the current encoding settings to output a file that will be UHD Blu-ray compliant file as you can for standard Blu-ray and DVD?

i.e. a file that wouldn't need re-encoding when/if TMPGEnc Authoring Works supports UHD Blu-ray.

Thanks in advance,

You probably could, you just need to know the specifications.

I have a bunch of DASH AAC (audio only) files that are not recognized by my video editing app. I need to re-encapsulate into regular AAC/MP4 audio-only files.
I wanted to use the tools I already have for this, but since TMSR5 doesn't seem to accept audio-only file, I need to find another way...suggestions ?

I am using a trial version of Mastering Works 7 and do notice that the encodes i do come out with a higher bitrate than i specified.

If i for example export 1080p25 using the "MPEG for Blu-ray File Output" and set the Level to 4.1 and Scantype to Progressive (2:2 Pulldown) and set the Rate Control Mode to CBR and set the Bitrate to 4.0 the encoded file comes out with a bitrate of 4.3.

I see the same thing with 720p50 encodes as well, iow that the bitrate i specify in MW7 is not obeyed by the encoder. Some fluctuation is normal, but not as much as this.

Why does it happen and how can it be solved?

After further testing it seems that the CBR option is broken in MW7.

If i set it to VBR 1-Pass and set the Bitrate to 4 and Maximum Bitrate to 4 the file come out as expected, iow with a bitrate of 4.

When can we expect a fix for this? :)

atten soldering gun

http://www.atten.com

Has anyone worked with this device? My mp4 files always appear in Masterworks 6 as RE (re-render), files don't seem to match what Masterworks 6 thinks is "standard" for Blu-ray NTSC standard. They work ok, but to completely re-render the movie takes a LONG time, even with NVIDIA operational.

You mean Authoring Works 6, right? AW6 seems pretty strict when it comes to what's within standard and what isn't, but it's hard to say what might be causing it to re-render in your case without any data.

I recently updated to version 7 from version 6. Previous version (6.0) was utilizing the CPU of my PC at about 100% on rendering. I noticed that the new version (7.0) provides utilization of the same CPU around only 50% (same PC). Everything is set similar for both versions, multi-threading enabled. CUDA activated for filtering. I can't find any place, where I can change it.

Anybody has the advice how to increase the CPU utilization to 100% ?
Please, help. Thanks.

Hi there,
the following error always appears , while encoding (in German):
"Während der Verbindung mit Ausgabeprozess ist ein Fehler aufgetreten (6)"
Ausnahmecode: 0xc0000005
Fehlgeschlagene Adresse: 0x619c41a7
Fehlgeschlagenes Modul: MovieMPEG.vme (Basis-Adresse 0x61720000)
Weitere Informationen 1: 0x00000000
Weitere Informationen 2: 0x0000400c"

I already re-installed the product and cleaned all the Registry- and common files for it, as it was recommended. But the error still appears! I can´t encode any video right now. Any suggestions? Thx& Greetings! Mr_KARR

System:
Win 8.1 (64 bit)
CPU: AMD Ryzen 7
RAM: 16 GB
HDD: >500 GB

Hi,

I have been searching for a modern flat screen tv that will display SD footage broadcast camcorder, tv recordings etc, with same definition as I see on my massive Sony Wega KD 32DX51U CRT two man lift TV, and have eventually found one, a Panasonic HD Tv, however any medium to fast movement displays a haircomb toothed edge along edges of the moving items.

I am told this is interlacing, the dvd player used in the shop was set to progressive, as these TVs are nowadays progressive.

I had fed it a dvd made using TMPGenc DVD Authoring Works and set to progressive, but am told just taking Interlaced and making a progressive disc isn’t enough.
Even footage on it recorded from Virgin Media Tivo box last year had the comb effect, surely that’s coming out of the tivo progressive as it presumes its going into a current flatscreen ?

I don’t see any comb effect at all on my Sony Wega CRT, just stunning detail not seen on any flatscreen until the one just found, which doesn’t better it, just matches it. CRT's were designed for Interlaced (or vice versa) I am told.

De interlace the original footage then make a progressive dvd disc again I am told to try.

Can TMPGenc DVD Authoring works 5 de-interlace my footage ? It first gets taken to PC via a dvd_ram disc then quickstream fixed in VideoredoPlus making it an .mpg then authored in TMPGenc.

I am not familiar with de-interlacing.


Regards

BOBC

Video going to a HD flatscreen can still be interlaced, and broadcast/cable TV might be interlaced from the source to save on bandwidth or because they are limited to a certain resolution/framerate, depending on what channel you're watching. So your footage from your Virgin Media Tivo Box can be interlaced if the source was interlaced.

Authoring Works 5 should be able to deinterlace your footage. In the Source stage, click on the Settings button for your track. Under the Video tab, change the Output Mode to "Encode All Video Streams as Below". You should then be able to change the Scan Type to Progressive.

You will have to repeat that for each track, if you have multiple tracks.

Hi, I had used TMPGenc to make a progressive and an Interlaced dvd, maybe I used that method, dont recall, but the progressive played with tooth comb effect on a current flatscreen played from a dvd player set to progressive.

was it that the dvd player should have been set to interlaced ?

was it that the TV was 1080p and I stand no chance of losing the combs unless I buy a 1080i ?

It gives SD quality matching the detail I see, and others can't, seen in SD using my Sony WEGA crt so I want to buy it as its the first current or not so current flatscreen plasma lcd etc technology that manages to give definition in SD as good as the WEGA, but I need to find out how big an issue its going to be with dvd's I make.

Can I fix the comb effect in the editing is my quest at the moment.

BOBC

If it was properly deinterlaced, the combing should be gone or minimized. Setting the DVD player to interlaced won't do anything, I would think.

I suggest trying to deinterlace a sample clip with Authoring Works and viewing the resulting clip on your computer to confirm that it is actually deinterlaced. If it is, then you can author your DVD without worry (at least, that part of the process won't be to blame).

A 1080p TV should be able to display a 1080i image as well, so I wouldn't bother looking for a new flatscreen.

I cannot see where in TMPGenc dvd authoring works 5 I tell it to deinterlace a clip. in the clip settings I see option to re-encode output which makes selectable another drop down with interlace or progressive but I need to deinterlace then create a progressive clip. Furthermore to have a choice of a few deinterlacing options would be better as I see there are 4 methods according to another youtube video, some are not so good.

Just where is the deinterlace option to be found ?

BOBC

Progressive Scan means non-interlaced. I've run my own tests and setting the track to progressive deinterlaced the video; it will automatically deinterlace the video. If it is not working, change the option for Field Order.

Like I said, the best thing to do is to do quick test and encode a very short clip and then view the output files to make sure it is deinterlacing properly.

Hi,
Thanks, back at this on eve of buying TV, I can see those settings so will try that (though no choices given compared to what I see in handbrake such as yadif) or lossless in HD vid etc prog, and so to see how well TAW does I will compare to de-interlacing using another prog.

To that end, I have tested handbrake and also HD Video converter Factory 15.4 for de-interlacing to compare to TMPGenc's abilities, as certainly the HD etc prog I found gave a result matching original when I chose lossless, vbr, 25fps, PAL, and resolution as per the original (720 x 576). Handbrake on default settings turned a grass football pitch into a featurless woozy mess. Also it changed 16:9 to 1.728 whatever that was as well as altering 720 to 700.

When authoring a dvd I see the interlace or progressive option for each clip and select interlace, when authoring all my interlaced clips , and choose 16:9 (I dont mix 4:3 and 16:9 on same disc. Not sure if one can but I dont.) then comes menu then simulation then burn and nowhere do I see an option to tell it to burn an interlaced or progressive. I assume TAW sees all interlaced and knows it must not burn progressive., likewise if it has been told footage as added is progressive (my de-interlaced footage done beforehand) it will burn a progressive disc, AM I RIGHT ?

I hope this TV I am after doesnt require me to deinterlace all my footage as its going to take me years. If it receives broadcast interlaced it would deinterlace.

BOBC

The interlace and progressive setting for the individual clip properties is a flag setting and won't cause the clip to be re-encoded. It's editable in case the flag is wrong and needs to be corrected. This flag setting is read by the player so it knows what type of clip it is. A wrong setting might cause playback errors in some players, but I believe most modern players are smart enough to play the clip regardless.

TAW will not burn an entire disc as progressive or interlaced unless the tracks are set that way. Each track can be set as progressive or interlaced, and that is how each track will be burned to disc. However, I'm not completely sure it will automatically burn an all-interlaced disc as interlaced. If your clips are DVD-compliant, then they should remain untouched, but if they are not DVD-compliant, TAW will re-encode them -- possibly as progressive, but I'm not sure.

So the best option would be to manually set the track settings to interlaced to make absolutely sure it will remain interlaced. However, if your clips are DVD-compliant, you shouldn't have to do that. If your output is extremely fast, then your clips are probably DVD-compliant.

Also, you can put 4:3 and 16:9 footage on the same disc as long as they are in separate tracks. If you mix 4:3 and 16:9 footage in the same track TAW will add black bars to letterbox or pillarbox the footage that doesn't match the aspect ratio set in the track settings.