I must have a setting wrong because I am trying to output a Blu-ray and although the two files I am using only total only 14 gig plus I have ticked "Do not encode these files" (or whatever the term is)the program is encoding again before burning the Blu-ray. Its playing through in less than realtime!

Q. If the files are smaller than 25GIG, there is no menus to encode and the flesare MPEG2's then shouldn't TAW4 just burn to disc in 20 mins or so @ 4 speed?

In the output stage the orange section has gone past the purple 25 gig limit and there is no menu.

mmm what am I doing wrong in the output stage?

Silly me was using "Blu-ray" files within Edius which TAW4 does not like.

Re - encoding now using the correct files!

I am still having issues with something blowing out and over the 25gig limit of a blu-ray disc.

I must be doing something fundermenatly wrong in TAW4.

I re converted my files overnight, hopped up in eager anticipation that my new elementary stream clips would be the answer and after checking their total size (audio and video was 22.8 gig) I set about making it happen in authoring.

NOTE: size of audio files alone is only 400meg.

But the dreaded orange line still appears.

This happens even with no menu.

What could be wrong this time?

What are your input file's characteristics? Use MediaInfo and post the details.

Is the Smart Rendering icon appearing in the edit stage?

Running Win 7 as single core and dual core ( x86 and x64 ) and Tmpgenc authoring 4 ran ok, with onboard graphics chip on the motherboard. Installed an Inno3D GeForce 9500GT DDR3 dual DVI graphics card, and the main editing screen is now blank. The timeline images below the main editing screen ( one second captures ) are shown, but as I cannot see frame by frame on the main screen, I cannot edit precisely. I've re-installed the O/S and then installed Tmpgenc, but it persists. Any ideas ? The graphics drivers are up-to-date. I can edit using other editing programs, but I like Tmpgenc.

This has to do with the video overlay mode. Right-click on the main screen and select/unselect the "Display in video overlay" option.

Input video
768x576 pix
PAR=1:1, DAR=4:3, SAR=4:3
progressive
PAL

Output video by program TMPGenc Authoring Works 4
720x576 pix
PAR=16:15, DAR=4:3, SAR=5:4
interlaced TFF
PAL

Do you know,
What are PAR, DAR, SAR mean ?


I am very, very wonder,
Why output video has black borders on left and right sides of output video 8 pix width each border ?
Really I have output video width 704 pix (video) + 8 pix * 2 (2-black borders) = 720 pix,

but

If you carry out minimum calculations, you wil see following:

768 pix (input video width) / PAR (output video PAR=16:15) = 768 * 15 / 16 = 720 pix.

Where are black borders here in video ? I don't understand !!! I have full 720 pix width output video (not 704 pix (output video) + 8 pix * 2 (2-black borders)) !!!

I know that Western People are not able to consider with fractions, I can help with fractions calculation !

Russian school education is the best in the world !!!

Is that using the encoder within TAW4.

Apparently you will not see the problem on a TV monitor only in playback via a computer screen.

I am using TMPGenc Authoring Works 4.0

I want full 720 pix width video without any black borders !
I want full 576 pix height video without any black borders !

See correct calculations at (1) first post.

PAR = Pixel Aspect Ratio. 1:1 means that your pixels are not being stretched; they are square.

DAR = Display Aspect Ratio. The ratio the video should be displayed at.

SAR = Storage Aspect Ratio. The ratio of pixel dimensions. SAR x PAR = DAR, or PAR = DAR/SAR. Since your PAR is 1:1, SAR and DAR are equal (for your input file).

PAL 4:3 can get pretty complicated. Check out this article on Wikipedia for why it wants to set a 704 pixel width for the actual image.
http://en.wikipedia.org/wiki/Pixel_aspect_ratio#Digital_video_processing

Also, see this article showing TAW4's output settings as a standard:
http://en.wikipedia.org/wiki/Pixel_aspect_ratio#Pixel_aspect_ratios_of_common_video_formats

It states: "Note that sources differ on PARs for common formats – for example, 576 lines (PAL) displayed at 4:3 (DAR) corresponds to either PAR of 12:11 (if 704×576, SAR = 11:9), or a PAR of 16:15 (if 720×576, SAR = 5:4)."

To avoid the black borders on the side, you'll need to switch the resolution to 704 x 576.

Do this by going to the Edit stage, click on the "Settings" button for your track(s). This opens the track settings window.

Go to the Video tab. For the Encoder Mode, select "Re-encode all videos as below".
This allows you to change the output resolution.

Select 704 x 576 as the size.

No more black bars!

Additional reading in case you want to learn more and do some calculations for yourself. Skip down to Section 3 to see a calculation table and see why TAW4 pads the video with the black borders/why you need to change the resolution width to 704.

http://lipas.uwasa.fi/~f76998/video/conversion/

Hi,

when I try to export to QuickTime, I get errors:

An error occured during the file output processing. (-50)


Are there any logs I can post for further information?


Kind regards,
A.

Hi all

I have a problem with making motion menues stay activated.

You press "motion" and it renders, you then see all the chapter playing as you would expect in motion. You flick to another menu and come back and all the motions have disabled itself!

"motion menu" under the motion menu tab within 'Global menu settings" is ticked.

I followed some suggested settings as seen via this link. http://www.videoproductions.com.au/TAW4/TAW4-motion-menu-settings.png

I have opened up a new project and still no go.

Any tips.

Is this while you're in the Simulation stage?

If so, it is only for preview purposes, so it probably doesn't retain the motion render when you leave the page. When you author the project it will work properly.

Thanks i will try that and see if motion menues work.

Do you have to manually make each page within a clip(title) render or do you just do this on the main menu page and it rendwr for all pages?

If you have say 60 chaptets and 8 chapters pet page then thats alot of manual work waiting for renders.

Question is do you need to individually render each page within a track.

So if you had a track that had 32 chapter points and you had 8 chapters per page does that mean you have to do 4 different renders?

If you had 3 tracks within a project will the same amount of chapter points you would then be having to render 12 times.

Is there not a "render all pages" button?

No, you don't have to render in simulation mode in order for it to output. The rendering in Simulation is for preview only. You can skip the simulation altogether if you want and when you output your files, it will render motion menus correctly.

I combined an .mp2 + .wav files but the video came out upside down.
Anyone know why this happened and how do I fix it?

thanks

What are you using to play the video? It is most likely related to the codec you are using.

I have a HP dual-core AMD computer with Windows 7 , running on 3 gigs DDR3 memory and I just recently purchased Mastering Words 5.
I tried to encode Blue-ray and it took over six hours for a 120 min movie.
I tried to encode a tv dvd that I own and convert the files to AVI and one file with a time length of 24 mins took over 4 hours!!!
I have used this program in the past and I noticed that sometimes it would encode very slowly and then sometimes it would work fine. I tried the batch encoding and the times were even longer.
thanks.

6 hours for a 2 hour HD movie is not bad I think. At this price point, you aren't going to get realtime encoding...Definitely not with those computer specs.

As for your AVI, what codec were you using? The codec could be your bottleneck. That could also be why the encoding times were different in the past; you could have been using a different codec.

Hello,

I import a TV programme from a DVD-RAM. I would like to take out the audio from a certain point in the video. An example would be to delete the audio from say, 10:00 to 10:15. Can this be done with this application?

If so, could someone tell me how please?

Thanks for any reply.

So you want to keep the video for that section but have no audio, correct?

You can do by splitting your clip into multiple clips to isolate the section you don't want audio in.

So in the clip editor window, move the playhead to the beginning of the section where you want the audio to stop and click the split-clip button. The thumbnail navigator should change color.
Then move the playhead to where you want audio to start again and set another split marker.
Click "OK". It will ask you which sections you want to keep; keep both blue and orange sections.

After confirming, it will turn your clip into 3 separate clips and you'll be back in the Edit Stage. Double-click the clip that should not have audio to open the clip editor window again. Go to the Clip Properties tab. For the Audio Stream mode, select "None". Click OK to finalize the change.

Thanks for your reply.

That's it. I've tried your suggestion and it works perfectly. Thanks very much for your help.

Regards,
Steve

Hi...

Using TMPGEnc Master Works 5, I'm trying to encode an uncompressed AVI at 923x421 into an MP4 at the same dimensions. Importing the video, the software recognizes the dimensions, but when I try to encode it, it changes them to 924x424.

No matter what I try, I'm not able to use my 923x421. What's happening?

thank you!

MP4 must be even numbers. You cannot make a 923x421 video in MP4.

Ok guys i have 1920x1080 MTS and convertint to dvd file and i get black line or left & right..
Is this normal to TVMW5 or I'm missing somthing on settings..

http://img12.imageshack.us/img12/7159/capturelka.png

Only TVMW5 convert with black line.
I use another software no problem..

Thank you
ED

I find on my way how to edit & conver HD file to SD..
Look video how I did it my be someone like me was suffering how to converte with black borders:

http://www.youtube.com/watch?v=bMTgewxNdmI

Please add more Blu-ray compliant presets.

Despite the (few) comments about this in this forum, I haven't been able to create Blu-ray compliant video using X264 (MPEG4 AVC) or VC1 (WMV9 AP).

So please add Blu-Ray compliant settings using:
x264 (MPEG4 AVC)
and/or
VC1 elementary stream

Thank you !

Note if anyone has MPEG4 AVC (x264) settings that can be successfully authored for Blu-ray without further transcoding, please reply here !

From the TMPGEnc facebook page:

"You can try outputting the video stream with the H.264 output format (video only) and then a separate encode for the audio stream using the Dolby Digital output format, then mux the two streams into a MPEG-2 transport stream with the MPEG Tools."

Basically, the h.264 template does not output a compliant audio stream, which is why it can't make a fully compliant BD file. The video stream itself is fine though, so it's simply a matter of creating compliant video and audio streams and then muxing them together. A user on the facebook page confirmed this to work.

Thanks,

Unfortunately, this does not work with Avid DVD 6.x (oem version of DVDit Pro HD): the video is imported fine, but it gets transcoded by the app (it does so whenever it decides the video is not compliant)

Not being on Facebook, I wonder if someone had success importing H264 video created by TVMW5 in DVDit Pro HD or any other Sonic authoring app ?

They were using DVD Architect Pro. Are you sure you set up the video stream properly?

Good question

What things should I change from the default MP4/AVC settings (beside bitrate) to create BD compliant video stream with TVMW5 ?
Avid DVD / Sonic DVDit Pro is very picky about what it accepts without transcoding

Take a look at these settings:
http://sites.google.com/site/x264bluray/home

You may also want to look at these simple constraints (resolution, framerate, aspect ratios):
http://en.wikipedia.org/wiki/Blu-ray#Video

http://sites.google.com/site/x264bluray/home
OK, but how do I enter command line options like "--bluray-compat" using TVMW5 ??

I don't know if command line is possible in TVMW5...if it is, I've never used it so I can't say anything about it.

I would start with a short clip, a couple seconds long, and start with just the basic blu-ray compliant settings shown in the Wikipedia article. Make sure it's a proper Blu-ray resolution, framerate and bitrate. Output as video only, no audio. See if Avid likes it.

If not, start looking at the more detailed settings from the google link. In TVMW5, switch to "MPEG output" mode to access the Advanced settings tab. There, you'll find some of the settings that correlate to the ones in that link.

Why TMGEnc VideoMastering Works 5 codes avi, - mpeg, - DivX, - HDV, - AVCHD - video files and etc. in HDV and Blu-ray formats in 3 times more slowly, than TMPGEnc 4 Express. It occurs and to application of plug-in SpursEngine under payment Canopus Firecoder Blu.
----------------------------------------------------------------------------
Почему TMGEnc VideoMastering Works 5 кодирует avi,- mpeg,- DivX,- HDV,- AVCHD -видеофайлы и т. д. в HDV и Blu-ray форматы в 3 раза медленнее, чем TMPGEnc 4 Express. Это происходит и с применением плагина SpursEngine под плату Canopus Firecoder Blu.