Having trouble with TAW-4 stalling at menu section of various video files when rendering files

from which to burn BR discs. It may stall right on the first page of the menu of the first video,

or accept that menu OK and then stall at a menu of a later file in the same set to be rendered.

And sometimes, it renders all the menus and video files just fine!

Just to go over my procedure, to see if you can find a bad setting: I open an MP4 file (captured

at 9Mb/s) in TAW-4, do not create a proxy file, accept all on the clip settings page. In the

Track Settings/Clip Linking, I Link the Clips (although choosing Do Not Link the Clips is of no

help). In Video tab, I choose "Re-encode all videos as below," use VBR (Smart rendering 1 pass

VBR; haven't tried CBR yet...), use 30000 max bit rate, 10000 Bitrate, and TAW-4 defaults to 9320

Min. bit rate. Leave Bitrate settings Picture quality at 90, and check the Always encode chapter

into I picture box. "Always encode chapter into I Picture" box
IS checked. In advanced settings: Motion search is Standard, "Outpute bitstream for editing

(closed GOP) box is not checked, Detect Scene Change box IS checked.
I then use the Edit feature to remove unwanted video before, during and after the show. I add

chapters at 5-minute intervals. I then go back to settings and add the title (something like

"Rolling Stones at Mt. Olympus ~ 1975, 1:47, 2011-08, R&R Network, 1.78:1."

Creating Menus: I have not tried the "No Menu" option, but will. However, normally I choose "16:9

aspect ratio menu in high definition" and Create a Menu based on a template." I have tried several

templates, but usually try one like Standard 1 (HD). Menu composition: Top and track menu. Disc

insertion action: Display the top menu. Track playback end action: Display the top menu. In the

actual menu creation section, I don't adjust any of the Top menu or Track 1 menu settings. I click

on Page 1 of the Top Menu, in which the title I added earlier, to the Settings field, appears. If the title is too wide to fit, I double-click on it and move part of it to a second or third line.

The simulation always seems to look and work fine. When it's time to Output, I set the target size to Blu-ray media (25 GB) size, since I always keep the Output size below the 22867Gb maximum.
I have tried both the regular Start Output and Register to Batch modes many times, but that doesn't seem to make a difference, either. (Users regularly say the batch mode uses less CPU memory, so is more reliable, but I can't bank on that.)

Anyway, I would be very appreciative of any suggestions you can offer, to change my settings and have TAW-4 finish authoring my files, without it hanging up on the menu portions of certain files.

I knew I forgot something.... my system specs:
TMPGEnc Authoring Works 4. Software version: 4.1.0.47. PC processor: AMD Phenom II X4 910

2.60GHz. RAM 8 Gb. Ffree HDD space: 700 Gb. OS: Windows 7 64-bit Version. File system: NTFS.

DVD,DivX,BD Player: Samsung BD Player BD-D5250C. Software used to create source file:

Source: DirecTV HD-DVR. Capture device used to create source file: Hauppauge Colossus 1414
Input video file format: MP4. Input audio file format: PCM. BR writer: LG WH12LS30.
writing software: ImgBurn 2.5.5.0. Blu-Ray Disc media manufacturer: Optical Quantum. Media type:

BD-R, Inkjet printable.

Thanks again.... KCTexan

I solved my problem. I was trying to render .mp4 files, instead of M2TS or TS files. I also solved a problem with rendered files being out of audio and video synchronization. I was capturing video from one program at the same time I was rendering other files on TAW-4. This was causing the audio and video of captured files to be out of sync. When I stopped rendering and capturing at the same time, my captured files rendered just fine, with perfect sync.

I WANT TO CREATE AVCHD DISC WITH OUTPUT SUPPORT OF MPEG4/AVC OR H.264 CODEC USE. RATHER THAN MPEG2. I THINK THIS FEATURES ROCKS. I PURCHASED TAW4 WITHOUT HESITATE
. LIKE YOU SUPPORT THIS CODEC IN VIDEO MASTERING 5.
THANKS

in filters the resize one is always on and it wants to resize to 320X240 with high quality interlace
Even though I choose progressive authoring works recognizes the files as interlaced.

The resize and deinterlace filter is always on because their parameters can be set from the Format Stage of the program. So in the Format stage, make sure you select the output size you want and choose progressive if that's what you want.

Hello,

I have a Sony HD camcorder (1440x1080) and my goal is to combine all of the segments into a single file and keep the same quality of the source MTS files.

System
* 32-bit Win7 w/ 4GB RAM (Dual Core 1.83Ghz Intel Core2)
* Windows Live Moviemaker and TMPGEnc Video Masterworks 5 are installed
* No other software installed

Results: Windows Live MovieMaker
* When I do this with Windows Live MovieMaker (on Win7), it takes about 24hrs to complete 2hrs worth of video (again, MovieMaker is keeping the resolution).
* The output file is WMV

Results: TMPGEnc Video Mastering Works 5 (v5.0.6.38)
* It takes 48hrs to complete whether the output file is WMV or MPG
* Filter Settings: Tried de-interlace when necessary & always (takes the same amount of time)
* Bitrate: I have tried various bitrate levels (25,000 down to 5,000) - it still takes 2 days.
* Also tried CBR 1-pass and 2-pass as well as VBR settings
* When outputting to WMV, I tried various quality levels


*** Question ***
* Outside of purchasing faster HW, is there anything I can do to speed up TMPGEnc for this? I can't figure out why MovieMaker is 2x as fast - especially since I am using a limited # of filters (de-interlace).
* I'm open to outputing to almost any format if that will help

Thanks!

There should be a difference in speed between MPEG2 and WMV output. If they are both the same, then something else is limiting the speed. Are these videos on your internal hard drive or are they being read from an external source? Try doing some test outputs with a shorter video (like 1 or 2 minutes long); that way you don't have to waste two days waiting for the output. What are the output settings in Windows MovieMaker?

Hi,

there is any plan to support BD-XL authoring?

Thanks in advance

will this product ever support importing from sources that have dts audio and will it ever have automatic resize to cut the black bars from bluray when making an MKV without having to purchase yet another version of this product to do so?

DTS audio might come later; I don't know for sure though. If it does come within this version, the update will probably be free.

As for resizing, there isn't an automatic resize option, but you can do it manually with the resize and crop filters.

people have been asking for AutoResize (AutoCrop) for ages,

version 2, no
version 3, no
version 4, no again.

version 5, no again.

an option that you will find in nearly ALL!!!! open source converting software, and yet this commercial product does not have it STILL!!!

it is off my opinion that the developers should feel ashamed of themselves for still not have such a basic yet so important feature.

programs that have autocrop (confirmed)

FairUse Wizard
MeGUI
Nero
StaxRip
Handbrake (VidCoder)
BD Rebuilder
BDtoAVCHD
AVCHDCoder
XviD4PSP


the above are ones that i have confirmed, there are many more though that do have it, it's a basic feature that is standard in most video conversion software, even NERO has it, and there usually behind in such things....not so behind in this situation.

for several years we have been waiting for autocrop.... and NOTHING, manual cropping....what a joke.

LOL - that autocropping feature of those freeware softs has some shortcomings.

And it does not take that long to adjust the cropping to your video.

BTW, TVMW5 CAN import video source files with DTS (through the DirectShow filter of course)- you can create a file with only the video and then use the MKVToolnix to load your files and select the audio-video tracks you wish and mux it into an mkv.

BUT, I also get the point: as a customer of this software, for $99 I would expect a bit more interest from the developers to implement highly requested features.

"And it does not take that long to adjust the cropping to your video."

you are joking me right, clearly you have never tried doing a Episodic series have you!

Startrek DS9 - 176 Episodes (each one needing there own autodrop values)
" TNG - 178 Episodes (each one needing there own autodrop values)
" Voyager 172 Episodes (each one needing there own autodrop values)

Stargate-SG1 - 214 Episodes (each one needing there own autodrop values)

need i go on, TMPGEnc products makes the above projects futile, you just can't do them because having to manually crop each episode (which must be done as each episode requires different crop values from each other) is completely absurd, which i'm sorry to say even still now 08/11/12 with there lastest version still no "Autocrop" function.....

"And it does not take that long to adjust the cropping to your video."

take that time and now mutiply it by 740 times if one would do the above project.... now what was it you were saying about time and cropping manually!


WE NEED A AUTOCROP FOR THIS PRODUCT....... WHY HAS IT STILL NOT BEEN DONE

(there are other forum members around that laugh at this FACT, yet can you really blame them)

Hi, I'm not sure whether this has been addressed somewhere else in this forum. I'm trying to join 1280 X 720/60fps clips (100s of them ) in to single file, just 2 hr video. TMVMW5 is taking 25 hrs (more than a day to complete this) which is very long. Only issue I'm using Intel mobile processor and 4G ram. Is there anything I can do to improve this ? I have tried other options to run it in highest priority without significant improvement. Thanks for any help.

Getting a better/faster processor will help the most I'd say.

For instance, if I use my old P4 3GHz, it takes over an hour to convert 6 minutes of 1080p video with deinterlace, fade-in/out filters applied. If I use a i7, it's practically real-time. A CUDA graphics card might also help, but only if you are applying filters or using the CUDA encoder.

Thank you so much for the reply,
The processor is Intel Core 2 Duo U9400 1.4 GHz. But no CUDA. No filters applied just default deinterlace & join. I thought there should be a configuration to speed it up.

Hello
I want to make text or picture that goes to another page.
when we click on it it goes to a new menu (page) with others chapters.
thanks

Make a custom menu. This will allow you to edit the button that goes to your chapters. You can replace the default image with your own image or text.

Thanks but I don't want my button goes to a chapter but To a new page menu!

The same applies to all buttons, so just change the image of the button that goes to your chapter PAGE. You will need a top menu page in order to do this.

Lately I have been finding that the videos I convert from wtv to mp4 are cutting off near the end when I watch them while streaming to a PS3. At first I thought it was a streaming problem. But when I check the files in question on the computer's player (Media Player Classic), the converted videos freeze and only play the frozen frame for the duration of the video. I edit the commercials out using Masterworks 5, so I know the original files are good. The problem happens in the conversion process, and I don't always watch the file right away. What a pain. Has anybody got any ideas what I should do to figure out what's happening?
Thanks, Gordon

I have now learned that all the videos I have converted using VideoMasterworks 5 since loading the program on my newly built computer have frozen in the above manner. It took me all night to find them all. Most were converted to mp4 (625X352, 23.976 fps, 1:1 pixel ratio, full screen no bars). It also happened to one that I converted as Divx. What could this be? My hardware includes a 2ed generation Core i5 2500k processor, Z68 Extreme motherboard (slot 1155), 8 gigs of Kingston RAM, and I am using built in processor video. This was all newly released hardware when I got it in May. I am slso using Core AVC 2.5.5 as a codec.
Interestingly, VideoRedo can convert a wtv file with the commercials edited out to an mp4 with the same resolution setting with no problem.
Please, can anyone help me? It seems to be a function of Masterworks 5.

Does it cut off at the same point for all videos? Does it occur at a cut point? How are you editing these videos?

Do you convert them to DVRMS when importing?

I had to delete 60 videos that I converted with Video Masterworks 5 since I purchased it. I thought the upgraded program would be able to import wtv files, but it can't. That's why the videos freeze (usually around 20 minutes, no matter what format they are converted to). If they are converted to dvrms first, this freezing doesn't happen. Is this a flaw in the program? Is anyone else having this experience?
Thanks, Gordon

If they are freezing, but not when converted to dvrms, that means the signal is bad at the point where it freezes, but not bad enough that the dvrms conversion can't take place. If the signal is really really bad, it won't even be able to convert to dvrms and you'll get an error. I've converted tons of wtv files so I know that wtv import is possible; whenever there is a problem it is because the source file is bad or the video was broadcast as H.264 (which TVMW5 can't import at all).

If you use the cut editor, you can usually see where the signal is bad in the thumbnail navigator strip. There will be a visual break and thumbnails won't appear for the bad section. You can cut out the bad section to avoid freezing, but of course, you will lose that scene where the signal is bad.

If you're using an over-the-air antenna, you may need to find a more optimal position to get a better signal.

I recently installed TMPGEnc video mastering works 5 and I have the panasonic hmc150 that produces AVCHD (.mts files), when I installed the software, I was able to produce .mov(using the avid codec dnxhd) file from my .mts clip, it played back smoothly, and I was able to use it in my avid and finally created a dvd out of it.
Ok fast forward to my problem, I wanted to create another project for another event that I shoot, so I went through the same settings in creating the .mov, but to my surprise, the playback is jerky/strobing, it does not seem like an artifact but playback is not smooth at all.
I thought it was due to my computer(6-core 2x 2.9Ghz, 12GB ram), so I create a dvd and the same jerky(it feels like it is moving frame by frame) playback is seen on my dvd player

Update, I have found the cause of the jerky playback. It was due to the CUDA being enabled with the filter, and I had also set mpeg1,2 for the CUDA hardware. I have the quadro 4000, so I thought the CUDA would be nice, but I guessed wrong, after disabling it, the file transcoded and played back smoothly. I am not sure if this is a bug in the current version.
BTW I have 6-core 2x 2.9Ghz with 12GB ram with windows 7 pro 64bit

Importing an MKV with DTS 6 channel.
TMPGEnc 6 doesn't recognize the audio at all.

That's because DTS is not a supported audio format at this time.

Hi!
I have .TS file (h264) from my camcorder and I want to make edited (just cutted in VMW) video, but without recompression. As a result I wish to have mkv with chapters. How?
Thanks. Dee

There is no smart rendering in TVMW5, so it will be re-encoded no matter what.

I am interested in knowing if TMPGEnc Authoring works 4 has any plans in the near future of supporting H.264 encoded transport streams for example MKV in TMPGEnc Mastering Works 5 for Blu Ray Authoring (smart Rendering) without using MPEG2 antiquated 1st generation technology. Unless the authoring software keeps up with Blu Ray technology and current preferred H.264 and VC-1 for authoring you will become obsolete,

Priyavadan