I'm using TAW4 to quickly put some recorded shows to DVD, using just a top level menu - no chapter menus, and one of the templates that comes with it - "Samurai," I think it's calle. However, I would like to re-order the default order on the template to start with the first video item, not the default item that is first highlighted when the DVD starts up - "Play All" - which is at the bottom of the screen.

How do I do that? I see no control for that.

This is a problem that I did not have in ver. 4. Files compressed Quicktime DNxHD 220 (8 bit) show the colors very saturated. The same video compressed DNxHD 220x (10 bit) looks fine.

Quicktime DNxHD 220 videos (1080i 59.94) 29.97 fps upper field first are detected as 29 fps and most of the time as bottom first. In ver 4 frame rate detection was always right and field order rarely wrong.

I recently installed Video Mastering Works 5 on my Windows 7 (64bit) machine, and it worked fine -- took about the same time as TMPGEnc 4 to boot and initialize. Then I had a major system crash (power went out) while encoding a video. When I rebooted the computer, VMW5 now takes 5-10 minutes to start! I've tried uninstalling and reinstalling, and I've tried pointing VMW5's temp directory to a new, clean location. I even tried doing a Windows system restore to the morning before the power went out -- no luck.

Any ideas on why it is taking so long to load, and what to try next? Thanks.

I had a PAL dvd I wanted to convert to mpeg-2 NTSC. I used the same settings in TVMW5 that I have been using in v4 for years. When I brought the titles into Encore CS5 it said the files were untranscoded. Using the same settings, afaik, in V4 the titles did not have to be transcoded in Encore. All that was needed was to make the menu and create the dvd.

I tested this several times each time making sure that the settings were the same and each time got the same result.

Has anyone else run into this that kept V4?

Joe

Found the problem.

In the format section under Advanced Settings the first box needs to be checked. That's Output bitstream for editing (closed GOP).

Joe

Same problem with the same solution in NTSC ;)

Hello,

When openening .mkv file not all the frames are displayed on the timeline.
How can I change the settings for this?

grts

Same here very annoying. When I imported MKV in TMPGENC Xpress 4.0 there was non of these issues.

Hoi,

Answer from tmpgenc support:


In TXP4 there was a ** frame interval but at VM5 it became MPEG file
reader so it became I image frame interval.
That is why at Cut-edit player, in the thumbnails not all the frames are
displayed.
At Options > Preferences > Clip editing > User settings 1 > set 16 frame
interval.
Make right click over the screen and select Display settings > and
choose User setting 1 (... option, (see screen shoots).

Best regards

how do i made TMPGEnc Authoring Works 4 make a sound when burning is completed like it did in version 3.0 ?

when using the source wizard and selecting a tv-recorded file to convert to MPEG-2 PS, when the conversion process starts and the re-multiplexing window pops up, it immediately says 100% but then hangs there for several minutes, still converting. the conversion still works in the end, but sometimes I'm not sure if it's still working or if the app simply crashed

I've noticed that as well. So far, it's never crashed on me, just had to wait for it.

same here

Hi,

is there a way to use TMPGEnc with line commands?

I need an automatic routine to demux mpg files. I just need the mp3-stream. Because I want to create a command routine in foobar2000 the demuxing is just one step of many, so I need to tell the MPEG Tools to demux by command line , but how?

Can anybody help please, best with a link to line commands...?
Thanks

Hi There.
This is my first post on the forum:

Please can you help us. We have just purchased your software in order to import our HD 1920x 1080 50i footage from a SONY AVCHD camcorder and convert the input file to a PAL 16:9 standard definition file, so that we can edit it and mix it in a Final Cut Pro timeline with other standard definition footage also shot 16:9.

When we select the avchd clip in order to input it we get the following meesage for every clip:

"Files with a “M2TS” extension cannot be opened ‘as is’. We recommend you use the Source Wizard’s DVD/BD importation functions

Do you want to open the file anyway?"

When you have 400 clips this becomes very challenging. We have tried using the Source Wizard to import but we get the exact same message. Please help us.

Please can you also reccommend the best way/ settings for us to accomplish our goal of converting the input 1920 x 1080 (16:9)footage to PAL DV 720x576 (16:9)so that we can mix with the other cameras, and so that we dont have to re-render the footage in the final cut pro timeline?

Your assistance is greatly appreciated.
Many thanks
Kind regards
Anthony

You should submit your question using their official support form, because this forum is just users helping users.

http://tmpgenc.pegasys-inc.com/en/support/support.html

There doesn't seem to be any way to bypass the message, but you can skip using the source wizard and just drag n' drop your files into the program.

As for DV output, you might need to use the AVI output format and use a DV codec that fits your needs.

If you used the source wizard, you'd never skip the message because of the fact that your file seems not to be connected with the structures such as Stream folder, Playlist and Clif inf so on. so you should choose the file or folder as is recorded structure, in this case you'll never see such message or at least once when you D&D the file. However you talked about the files not being included AVCHD or BDMV folder, there's no way, its surely lemon.

any plans to include an option for a 2-pass encode using CUDA encoding? looks like 2-pass is only available for x264 right now.

thanks

Hi

It's technical difficulty of doing so on such hard devices like as Geforce, AMD and QSV, and more speaking, this products uses native Nvidia Encoder, so it depends on it whether it's possible.

I'm this > < close to purchasing VMW5, especially with the latest updates and bug fixes, but I have to figure out *some* way of importing DTS audio.

Is there some trick, filter, plug-in, add-on, or pre-processing I can do to allow VMW5 to accept my DTS-HD Master Audio input sources (MKV files, for example)?

- Dave

I think the only way is to convert the DTS audio to another format before bringing it into TVMW5.

I am in desperate need of some help. I was given this website as a place to go as I was told this software was easy to use. I went ahead and downloaded the free trial version so I could test it out before I buy it, but I do not think all the key features are in the trial version. Can someone tell me if there is a tutorial on the Video Web Mastering 5 that I can view? Basically I need this software to accomplish the following things for me - editing the film by removing lots of unwanted footage, highlight my son before the play starts by a light or arrow, have a title page in the dvd before the footage starts, adding cool music to the tape, and touching up sections of the tape that might be a bit blurry and divide each play into its own key frame.

I am frantically trying to do a video highlight football tape for my son's game highlights. There is a serious amount of this that needs to be trashed as I am only pulling out certain plays. I also want to "showcase" him in a way such as an arrow or a ring around him or a spot light around him. Will this software do this? I have purchased many softwares in the past as the store clerk assured me it would do it, and it ended up being way way to difficult and I ended up returning the software.

I am not a computer genius but I do know my way around a computer so if anyone could offer me guidance or help it would be greatly appreciated as I have a deadline to have this tape finished and I was hoping with all the rave reviews I have heard about this, this one would be the one.

I think what you want is a video editing program where you can add menus, titles, and special effects.

Windows comes with a free one, Windows Movie Maker. It's pretty basic and I have never used it so I can't tell you if it does all you need. I use Pinnacle Studio and Adobe Premiere Pro but there are other consumer level programs. Sony and Adobe both make good ones too.

You mention touching up sections that might be a bit blurry. If they are out of focus you won't be able to sharpen them well enough to be worth looking at.

With any of these programs there will be a learning curve so if you need a polished video by next week it's not going to happen. :-)

Joe

lotton34: You can do most of what you want to do with this software, but you will not be able to make DVD menus and burn it to DVD with this software.

What Video Mastering Works 5 can do:
- cut out unwanted footage
- overlay an arrow pointing to your son (though you'll need to create or find an arrow graphic that is on a transparent background); you can also animate/move the arrow along with your son if the camera or your son is moving.
- or if you prefer, you can use the Mask filter to highlight your son. The mask can be moved to follow your son.
- I believe you can add/overlay music in the timeline editing mode.
- touch up sections of video (there are filters for sharpening); the smart sharpen and contour filters seem to work best in my opinion.
- add key frames (these can be translated to chapter points in authoring programs)

What it can't do:
- create a title page in the dvd
- create/burn a dvd