Help! I have been using TMPGEnc for a few days with not problem...converting AVI movies to MPG then burning as VCD. I had to reinstall windows XP (including reformatting the partition) and now it no longer works. Immediately when I select a file to convert, I get message "can not open or un-supported file" The same files were converting a few days earlier. Anyone have this problem or have any suggestions? Thanks

Go to "options" to "enviromental settings" to "vfapi Plugins" and raise the "Direct Show" to "2"..and Make sure you have the correct codecs installed...

I have been reading some of the Posts..and seems you might have some answers to some very basic questions.

I have used the free download version of TMPGEnc..
I have been able to do some interesting encoding..DVD (VOB file)to MPEG-2 and a burn to a SVCD!

I have AVI files from a GL1 Canon camcorder.
I want to encode these to MPEG-2 and burn them to SVCD!

I have noticed that on my TMPGEnc program, there is the mention of the 30 day trial period being over for MPEG-2 encoding.
Also there is the offer to purchase the program!
My understanding was that this free version would be enopugh for all my mpeg-2 encoding needs!
Obviousl not!
Can you confirm this!
Is it worth my while to purchase this program?
Or would I be better off in the long run, since I am doing VIDEO EDITING work, to purchase a robust program like Pinnacle?
Or will TMPGEnc do me well for a lot of my editing needs?

What are the arguments for purchasing TMPGEnc?
It will cost about US $50.00.
A program like Pinnacle is much more costly.
I have Video Studio and Media Studio programs and still found a use for TMPGEnc.

I would like some feed back!
What of other AVI2MPEG encoders..costing only say US$17.00.

What is the word on the usefulness and worthwhileness of TMPGEnc?

Since it did so well in encoding the VOB file to MPEG -2 for SVCD, I was very happy with TMPGEnc.

By the way, another question, while I am at it.
I am always running into file size restrictions when wanting to SPLIT or JOIN an MPEG-2 file.
I have to be under 2 gb.
Some of my files to be split are larger than 2 GB, and some clips that I want to JOIN are larger than 2 GB..and so all the trial versions of Splitters and Joiners simply do not work?
Is TMPGEnc (purchased version) able to SPLIT and Join these large files?

Is it better to purchase TMPGEnc (if I go this way)as a CD mailed out to me, or simply pay thru the Internet for a registration key and use my free TMPGEnc version (2.64 MB)with my registration key?
Seems a CD version would have a lot more on it than the 2.64 MB!!!

Just thought I would ask these basic questions...since it seems a number of people will know, at least a bit of this!
Thanks!

Well Tmpgenc Is not an editor even though it has some editing features, and Tmpgenc is the Best encoder for the Money there is, the only other encoders that are as good as Tmpgenc cost Closer to $1000-$2000, and Pinnacle Sucks the Big one, I have Quite a Few Pinnicle Programs and They Suck especially the Mpeg encodeing..When you Purchase Tmpgenc you get a Registration Number through your E-Mail and you download a Different Version the "Plus" version and You don"t get a CD But you can Burn it to a CD, the Plus version is something like 7mb..If you only have a 2gb limit you should format your Hard drive to a Fat 32 system that way you get a 4gb limit or if you have XP,NT or 2000 you should format it to NTSF which has an unlimited file size..You aren"t really supposed to encode VOB files with Tmpgenc, you are supposed to use DVD2AVI to frame serve the VOB file to Tmpgenc ,it is a Much better method Cuz it is Much faster this way Cuz Tmpgenc doesn"t decode Mpeg2 files as Fast or as well as DVD2AVI..You can easily merge mpeg files with Tmpgenc But it can get a Little Buggy at times..I would sugest Purchaseing the Software Cuz it is the Best value for a Mpeg encoder there is, you can get Faster and Better quality encoders But they also Cost an arm and a leg......

TMPGEnc isn't an editor. Before you throw money around, find out what you need.

The Pinnacle software (such as Studio) that you mention are full-featured editing suites of varying quality. These are designed to take AVI or DV raw material, and help you to produce an edited file in the format of your choice: recorded back to DV tape or rendered to AVI, Real, Quicktime or MPEG.

The MPEG conversion included within these packages is not very good at all. This is where TMPGEnc comes in: render the edited video to AVI (preferably with a lossless codec like Huffyuv if you can afford the disk space) then convert to MPEG with TMPGEnc.

If you want to do MPEG-2 encoding without the time limit, you will need to buy the full version. During development, there was always a new version of TMPGEnc released before the time limit was up, and upgrading reset the time limit. This is no longer the case.

I will just make a few quick points about TMPG.

1. MPEG1 encoding quality - Well known unbeatable by any other program.

2. MPEG2 encoding quality - Excellant ,but beaten by CCE.

3. Features and supported formats - Unbeatable by any program for price.

4. Frame serving ability to almost any other editing program or encoder there is which accepts AVI's.

Pay the money it's well worth it. TMPG is capable of doing a lot more than it first seems when you start using the program.

ASHY

Thanks for your answers Ashy, Minion and Mark...I will digest!

I get that purple color too. where do I look for the angel potion codec. I cant find it. Please help.

On your Computer....Go to "Controll Panell" to "System" to "Hardware" to "Device manager" to "Sound and Multimedia" to "Video Codecs" and Look for either an entry for Angel Potion" or "apmpeg4v1.dll" and delete it...or go to "Start" to "Search" and type in "apmpeg4v1.dll" and search for it...

I did a seardh no apmpeg4v1.dll was found in there but there are alot of others in there can it be one of them making have the purple color? I still get the purple color when I do my VCD. These are a list that was in there.
Cinepak (TM)
DIVX ;-)MPEG6-4 Video Codec (Fast Motion)
DIVX ;-)MPEG6-4 Video Codec (Low Motion)
Indeo I.263 Video Driver
Indeo Video 5.41
Indeo Video interavtive R4.3 by intel
Indeo Video R32. bye intel
Indeo Video R32. bye intel
Indeo wideo Raw YVU 9 intel
Intel .263 video driver 255.016 [1420]
mpg3c32[mp42]
msh261[m261]
msh263[m263]
ms-mpeg-4 video code V1
ms-mpeg-4 video code V3
msyuv [uyvy]
msyuv [yuy2]
msyuv [yvyu]
RLE
VDOnet VDOWave video codec
Video 1

I dont know why I would be getting the purple color if I dont have apmpeg4v1.dll. Can tell me how I can get rid of it?

Maybe you just need to raise the "Direct Show file Reader", this can help with Discoloration....

Is there a filter you can get to put a logo on your vcd I make. If not is there a way it can be done?

There is a Logo Filter For "virtual Dub" that you can use and Frameserve the AVI File to Tmpgenc to make a VCD...

Yes I know I have it for Vdub. I was wondering if there was a way you can do with tmpgenc while your making your mpeg vcd.

Tmpgenc does not have Filters of this sort But it is Just as easy to Frameserve the Logo to Tmpgenc....

Can anyone give me general tips on settings within TMPGEnc to get the best quality MPEG1's for VCD. Mostely I'm using downloaded AVI's. Anything would be helpful as I am just getting into the VCD thing.
Thanks!
Lisa

Before the questions, my goal is to take some tapes from Sony 8mm (camcorder) and some VHS tapes from home and convert them to a digital format.

Each of these is about 2 hours long and the VHS tapes were recorded in SP NOT EP.

First question, will 80 gigs of space be enough for all this?

Second, what resolution should I capture them at? Keep in mind the camcorder has an S video output while the VHS uses the RCA cable types.

Third, what format should I keep them in? I want to keep the highest possible quality right now since I may later edit them.

Fourth, once I have capture them and stored the origionals, what program(s) should I use to filter them since these are a few years old and on a VHS or 8mm? Is there any software which can also go through each frame and sharpen them up a bit?, because I've used the sharpen feature in Adobe Photoshop for some images and it seems to work pretty well.

Fifth, do you have any other tips for me so my capturing goes better? (Possibly from past experiences?)

Thanks in advance.
AgaBoogaBoo
ankygupta@hotmail.com

80Gigs isn"t a Lot of space when you are talking about Digital video, I just recorded a 3 hour Movie and it took up 70GB useing The PicVideo Mjpeg Codec...What resolution you capture to Basicly depends on what the Final product is going to be, meaning are you going to make VCD"s or SVCD"s or DVD"s..Or do you just want to store them on your Hard drive or do you Just want to Archive them for safe keeping??? If you just want them to take up the smallest Possible space with the Highest Possible Quality then I would Capture at a High resolution like 640+480 or 704+480(These are NTSC Resolutions) with a Software Codec Like HuffyUV or Mjpeg then encode the Captured File to DivX..This way you could get a whole 2 hour movie on a Single CD-R and be able to store it for later use with the Best possible Quality for the File Size..But since you only have 80GB you will have to Do a single movie at a time..But since we don"t know a lot about what you will be doing I can"t really tell you to much, do you have an analog Capture card or a Firewite Port or digital Capture device of some sort, and what is the end product going to be, and what software are you useing to capture with?

I was trying to convert an avi file to mpg so that I can burn it into VCD. But when I used WMP to play the output mpg file, there is no video (audio is ok).

I tried the conversion again and when I clicked on Preview in TMPG, the display window is blank.

Anything I overlooked? Thanks.

Christina.

Go to "Options" to "enviromental settings" to "vfapi Plugins" and raise the "Direct Show" to "2"....

Thanks a lot Minion. I tried to change the priority but do not know how. I was on that screen, and except the checkbox, I was not able to edit anything. Please kindly advise. Thanks.

Christina.

right click the line to get the option to raise/lower priorities

I have had problems converting a file from avi to mpeg.
Now I am unable to delete the source file - getting the error message the file is in use.. This is not the case or so I think.
How can I delete this file ????

Many thanks

Just reboot then delete it.

ASHY

Ashy I have tried that - believe me.....
All normal procedures have been tried..
The film needed Xvid to run - is it possible that Xvid has got hold of it some how...
I have uninstalled Xvid to try and do the business.
Im sure I have read that it can be removed by going into 'regedit'.

This is a known problem. Once you select the file in order to delete it, explorer opens it... It's a stupid thing of windows... Just go to the command prompt and delete it from there...

Thank You VERY much..
1.5 Gig now to play with..
I was starting to think a format and reinstall system was on the cards..

Many many Thanks

I have Had This Problem also and was able to delete it in Safe mode...

When I convert AVI files to mpeg using tmpeng, and having set direct show to +2, the encoding process gets to about 75% then freezes, locking the program. Any solution or tips?

There is Probably an error in the file were it freezes up..Encode up to were it crashes then use the source range to start encodeing a new file a couple frames after were it crashes then join the 2 files together, of you can try frameserveing the Source file to tmpgenc...

Thanks , but I am new to all this, how do I join the files together?

Go to "File" to "Mpeg Tools" to "Merge & Cut" and Load in the 2 files Pick a name for the new file and Click "Run"...you can edit the file here also...

Ashy,

Could you please confirm there is a memory leak in of the ASF reader in TMPGEnc 2.59?

I doubt this is a memory leak problem related to TMPG. ASF and WMV files are notoriously difficult to encode if there is the slightest problem with them.

My advice is to frameserve the file from Virtualdub_ASF to TMPG.
http://ambamo.free.fr/FILES/avi/VirtualDub14c-asf.zip

ASHY

>I doubt this is a memory leak problem related to TMPG. ASF and WMV files are notoriously difficult to encode if there is the slightest problem with them.

Sorry, but I think it is a problem with TMPGEnc. I think it is related to the DirectShow file reader. Also a thing to note: if TMPGEnc chokes on memory or I abort encoding, all memory that has been eaten by tmpgenc.exe is released. I can't be the MPG encoding part, otherwise all users would be having trouble. I am convinced that the DirectShow reader is simply forgetting to free some buffer in the process...

>My advice is to frameserve the file from Virtualdub_ASF to TMPG.
>http://ambamo.free.fr/FILES/avi/VirtualDub14c-asf.zip

Same problem... Try it yourself, this is the stream I am trying to convert (downloaded with Streambox VCR and renamed to ASF):

mms://a132.v7073d.c7073.t.vm.akamaistream.net/5/132/7073/sonyadtv/1a1a1a0468d6037af168960978e65fc024980e3c9f0e7baa218e02/262D85E403E094FE1D24.wmv

You could try frameserving the video from AVisynth. Load the file into AVisynth using the Directshowsource command, for example:

DirectshowSource("E:Sample File.asf", fps=30)

ASHY

>You could try frameserving the video from AVisynth. Load the file into AVisynth using the Directshowsource command, for example:
>
>DirectshowSource("E:Sample File.asf", fps=30)

Well, that rules out the DirectShow reader, but the memory leak remains! No matter what TMPEGEnc.exe keeps eating 300KB per second, wether during encoding (with or without frameserve) or just playing sound preview (without frameserve, as AviSynth has no audio support for DirectShow).

Do you have an old version (2.58) so that I can test if the bug is there as well?

http://www.netmindz.co.uk/dload/download.php?file=/TMPGEnc-2.58.44.152-Plus-EN.exe

http://www.freeterritory.host.sk/files/TMPGEnc%20Plus%20v2.58.44.152.zip

I give up... same results in 2.58.

I get strange result all over. Encoding in lower res slows the memory leak. I asume that when running TMPEGEnc, the decoding dll's run under that process as well? (That would explain the rising memory under TMPEGEnc.exe.)

Playing the asf through AviSynth in Media Player also shows a memory usage increase. Opening the sound preview starts eating memory without playing. I just can't pinpoint where the leak occurs.

Borrowing a Win 2K box next weekend, see how that goes.

Will there ever be more audio support because I prefer not having to use a seperate program for audio and then merging... just my opinion

What do you mean seperate program for audio and merging?

ASHY

Tmpgenc encodes Audio and Muxes the audio so there is no need to use a seperate program to encode the audio...and If you have the correct codecs and Playback filters you should be able to encode allmost any audio format with Tmpgenc.....

I have a video capture MPEG2 made whit Ati rage 128 ,size 3Gb and lenth 49 min.When I demultiplex whit mpeg tools the video file is only 37 min and too fast but the sound stay at the right time ?

Strange, seems like the file is relying on the audio for correct timing. What does media player report as the frame rate when playing the de-multiplexed file?

Why do you wish to demultiplex?

ASHY

the statistics are not avaible whit the demux file.I want to convert it in SVCD

No solution ?

You must use Mediaplayer 6.4 which is located in the same folder as the new version for the info.

ASHY

the demux file is 25 fps.I have problems for playing the original file whit the media player ,falling to 8 fps or freezing but ok when play whit powerDVD.