Can't load "P3Package.dll"

In the search at the top of this screen type in "p3p package"..

Unbeleivable.

I have 2 questions. Is there an easier way to join a sound and video file without having to encode the thing over again? And i have a video that is set for 640 x 272 resolution.... how do i keep it that way? the first time i tried it it came out stretched vertically because it tried to make it full screen. then i noticed that there is an expert button when setting up the video... i went to the advanced tab and changed the full screen to center (custom size) and typed in 640 x 272... this time the movie came out with the left and right sides completely cut off

You use the "fullscreen keep aspect ratio" setting and the movie will come out looking as close the the original as possible.......

hm, where exactly is this setting? i see aspect ratio with alot of different ratios...

Under settings to "advanced" to "video arrange method" and select the "fullscreen(keep aspect ratio)".....

I have about 25 minutes of video I want to burn to a Video CD. (I am using Roxio Video Pack to create the menu sytem, etc.) I have so much left over space on the CD. I was wondering if there was a way to increase the video quality while still keeping it compatable with all VCD players. The original files where output from Adobe pemiere to a microsoft AVI format using the indeo compression scheme. I have been using the generic Video-CD (NTSC)setting in the TMPGEnc wizard to convert the files to mpeg's. It works great. But can I use the extra disk space to make the mpeg's a higher quality (Forgive the redundancy.) Also which settings are best for output to TV. I have been using 4:3 525 line NTSC (aspect ration), interlaced (Video type) and top field first (Field order). Thanks again.

Yes and No, you definately make it much better quality and have it be complatible with probably 85% of the players(just a guess)that play vcd"s I actually never used a player that couldn"t play high bitrate vcd movies I do mine Really high and they look great,You have 25 minutes of video and a 80minute 700mb cd-r (can hold 800mb of vcd)you can put the bitrate up to 4250kbs and just fit it on a cd-r maybe make it 4000kbs to be safe.To raise the bitrate that high you will need to load the "unlock.mfc" template in the Extra Folder, your authoring software might give you an error saying the bitrate is to high but just ignore it..

I have ripped a DVD's VOB files, and it is too big to fit onto a single DVD-R. I don't want to compress it so I decided to use "Source Range" in TMPGENC Pro to first select the first half then the second half. When I select the first half and try to encode (it selected Inverse Telecine by itself), after the inverse telecine TMPGENC just closes by itself. If I deselect Inverse Telecine and hit "encode now" TMPGENC just closes. What is wrong here?? Thanks.

How are you feeding the "Vob" files to tmpgenc ? are you loading them directly in or are you frame serveing it to tmpgenc?If you are loading them in don"t ,frame serve them from dvd2avi and then you can edit the parts in dvd2avi then encode in parts, I have had problems with tmpgenc at times with the source range or the edit or any feature were the movie has to be displayed...good luck

By frameserving you mean creating the d2v files in DVD2AVI right? That is what I do.

So far I am loving this program. I am new to video encoding. This program makes it easy. It also seems to output the clearest Mpeg video of all the encoders I have tried. I was just wondering if there was some sort of manual. There are so many options and I have no idea what most of them mean or do. I would love to be able to understand what they all mean. Thanks.

Dan

If you click on the banner on the bottom or this page you can download (and or purchase)the "Plus Version" it has a fairly comprehensive explanation of all the features of Tmpgegc in the Help file,and the plus version is better than the demo version but the mpeg2 is only good for 14 days unless you buy it then it"s yours plus you get to have free upgade to the new versions.....

does anybody know how i can convert an AVI format Video file to MPRG format video file with TMPG as it rejects the file selected.

You are probably getting a "cannot open or unsupported format" Error when you try to load your file, to Fix it , go to "options" to "enviromental settings" to "vfapi plugins" then raise the "direct show file reader" to "2" by right clicking it and selecting raise priority,this should get you file loaded..

thanks 4 your help minion it saved me alot of hassle
thanks again

Which is better?
And how can I figure out what CQ bitrate/quality to use to fit a movie onto a cd?

With CQ you can fit a whole bunch more on a cd-r while keeping good quality, but it is allmost imposible to figure out what the file size will be cuz it changes depending on the avi file you are encodeing ,but I have been able to fit 100min of OK quality vcd on a single cd-r, useing the standard vcd resolution with CQ with 5000kbs max and 950min with 85 quality, but you have to have the "system" setting on "mpeg1/vcd non-standard" and do not enable padding.....

I have seen that you can make TMPGEnc run a batch conversion. Can anyone please tell me how to do this? Please bear in mind that I don't seem to have the help file loaded on my version so this is why I am asking this forum. Thanks in advance for your help!

Andy

You load each file in individually, do your settings then go to "file" to "save project" then repeat for each file then when your done the go to "file" to "batch encode" and then load the "tpr project files" into the batch encode window then click "run" then it will encode all your files..

Thanks Minion, I'll give it ago with the last part or "Ali G - In Da house", beautiful DVD ripp I just downloaded....

I used TMPGEnc to convert .mpeg files I downloaded off the internet because they refused to burn, and I thought that if I converted them again, they would burn. Well, it turns out to take about 45 minutes to convert a 4 minute video while converting a 4 minute .asf file only takes about 11 minutes or so. Why is .mpeg taking so long?

This application puts quality first, regardless of time. I know from experience that it can take many hours to encode movies, so 4 mins in 45 mins does not sound excessive for an mpeg file. Obviously, if you compare the speed of something like VirtualDub to TMPGEnc, the latter appears to be a lot slower, but you need to think in terms of what they are doing: VirtualDub is only converting to a different codec.

Andy

Your MPEG files will burn to disk but the problem probably is that they are just mpeg files not vcd or svcd file what you have to do is attach the proper headers to the mpeg files, load an mpeg file into the "merge and cut" and choose your output directory and if it is a mpeg1 file then choose "mpeg1/vcd non-standard" from the drop down menu, and if it is a mpeg2 file then choose "mpeg2/svcd VBR", then click "run" this will make a copy of your mpeg file with the headers attached to the file so you can burn it to disk...

The new TMPG dosent work with Windows 2000 SP2 correctly, the problem is when you encode an AVI File to VCD, the Audio source Stream where not put to the Audio source !
If you select the Auio Source in Single there comes an Error Message "The Audio Source is unknown or not suportet"



Can you help me or is there an problem in the Software

The problem probably isn"t with tmpgenc the problem is probably that the audio format in your avi file is not supported in tmpgenc ,you have to extract the audio to a wav file with "virtual dub" and use that as your audio source file, but if the audio in your avi file is "AC3" then you will need a AC3 decoder...

I have encoded a 3 minute pop video to High Quality PAL MPEG-2, cropped, sharperned, de-inerlaced etc...

However, I now want to conver the file to NTSC, to send to an American friend, so all I am doing is taking the file and converting it to NTSC.

My problem is the finished file has a repetative stutter where it slows for a moment, every second. The picture and sound seem to stay in sync, but the file has this constant stammer.

Is there a process or option I need to select to cure this?

It happens because you have changed the framerate.

ASHY

So here we are again. Do you not know what will happen if you do as you suggest?
To think this advice is coming from somebody who is so keen on research, well it is obvious you haven't researched in this aspect.

You cannot convert a 25 fps movie to 30 fps without artifacts when using the 3:2 pulldown checkbox.

I have posted the method to achieve this on a few occasions and it is not a simple matter of adding 3:2 pulldown.

ASHY

Hi, everybody!

Could anybody advice me, how to get subtitles from a DVD rip into TMPGEnc (to be seen directly on the screen, not to be managed by SVCD system)? Some say the FlaskMPEG can handle subtitles when IFO file opened. I tried to open IFO file with FlaskMPEG with no result. The FlaskMPEG site does not give any suitable information.

I know this is only a "half" relative to TMPGEnc, but can somebody help me?

TIA George

I think you would have to frameserve the file from virtual dub and use it's subtitle filters.
Create a d2v file, use the vfapi converter to change the d2v file into a dummy AVI and open it in Virtualdub. Extract the subs from the DVD using one of the many progs available on the net and convert them to a format that virtual dub can use then frameserve the AVI with the subs to TMPG.

ASHY