ok i posted the last time that tmpgenc keeps freezing up on me, now that everytime i encode i get the following error:

error:
.537403781 99504

i dont know what this is, and it always keeps popping up
anyway to fix this? im running lost here

Do you get the error for every file you encode or just one specific one ?
Have you tried re-installing the latest version of TMPGenc ?

yes to all your questions, i reinstalled and it still gives me an error, and it does it too all my encodes :(

Hey exact same thing happen to me except after it shows the error msg. , the time jumps to like 80 hours to decode. Does it do that to you?

Before you flame me, I have already tried the VFAPI Environmental Settings option that has been suggested many times, but it did not fix anything.

I used to be able to open MPEG-2 files just fine, and then all of a sudden, it stopped working. I may have caused it by installing an additional codec, but I've tried removing every mpeg player I can find, but I still can't fix the problem. Does anyone have a suggestion?

Nevermind, I fixed it by doing a "Full" install of the Nimo Codec pack.

I would be interested in knowing another solution ...

I had this problem when I upgraded from 2.56 to 2.57. 2.56 can open my MPEG2 files, but 2.57 cannot. I have an MPEG2 Codec (PowerDVD XP). Perhaps I need to reinstall PowerDVD? I too have not had success with changing environmental settings.

Thanks,
Xerces

Thanks to your help, I now have incredible quality for a 2 hours movie. But now, it seems I have some problems with sound. I encoded from a divx file. I first extracted the .wav with VirtualDub using 44100, 16 bits and stereo (to be clear: cd quality). Then I normalized the sound using NormalizeGUI. But after encoding the sound has some strange "metallic" noise. I tried with different higher bitrate, I get the same results... do you think I should use a better MP3-layer2 encoder. If yes, which one do you use and if not, how do you procede...

Thank you very much for your help,
Nicolas...

So I didn't mean MP3-layer2 but MPEG1-layer2... you certainly did the correction by yourself...

Are you useing Tmpgenc to encode the audio???There are other audio encoders that you can use with in Tmpgenc, and you can get a sameple rate converter for tmpgenc also pluss you can Normalize with tmpgenc too. The other audio encoders for Tmpgenc are much better than the one that is in Tmpgenc, the two that I have tried that are good are "Toolame" and "SCMPX" you can find them on any search engine and you install them in tmpgenc by going to "options" to "enviromental settings" to "External tools" and then just "Browse" for the encoders "exe" file and that is it.......

The sample rate converter is use is SSRC (Shibtach Sample Rate Converter I think)

http://shibatch.sourceforge.net/

Extract the audio again with Virtualdub, but this time make sure you check the 'High quality' box.
There is no need to normalize the sound with 3rd party software, both Virtualdub and TMPG can do this.

This should solve your problem.

ASHY

"SCMP" Is a sample rate converter also.

Thank you I tried Toolame and the sound is really nice now... I dunno if it's Toolame or not normalizing the sound as ASHY said but I think using the two ways is not so wrong...

Thanks for your help,
Nico...

Just wanted to add, that after I create my wav file with Virtualdub, that I use toolame gui and create a MP2 file before using tmpgenc. This way I have the option of changing settings if I want, but usually I make them the same as Tmpgenc does when it uses Toolame, which are the defaults except for :
-m for 's' stereo
-p for psychoacoutics model 1
-d for de-emphassis:n
-e for add error protection (CRC)
These settings can be saved in the toolamegui.ini file which also allows for batch processing and runs faster and smoother than when it does in Tmpgenc. Tmpgenc then just does the encoding and I point the audio to the newly created MP2 file.

The big thing is that if there are problems with the audio, I know them before hand and if something messes up later and I have to repeat the encoding, the audio file had already been created so I don't have to run it again.

You can find the free toolame gui at the "gui guy's" web site: http://guiguy.wminds.com/downloads/toolamegui/. Just make sure that you have toolame.exe in the same directory as where toolame gui is installed.

If anyone cares, here is what the contents of my toolamegui.ini file looks like to create the exact settings the Tmpgenc does when it calls Toolame.

[Main]
CLIpath=c:my documentsapplicationsaudio oolame oolame.exe

[Output]
M=1
Mode=1
P=1
Psy=1
B=1
Br=224
V=0
Vlev=5

[Misc]
F=0
Q=0
Qnum=num
D=1
Demp=n
C=0
O=0
E=1
R=0

After installing the new version I keep getting a streaming error. I do use the custom XSVD. Could this be the cause of the problem.

Thanks

When i encode Divx fils to Mpeg layer2 i seem to get the following error, usually between 2% - 25% into encoding . Please help.

" Write Error occurred at Address 00486f76 of module tmpge.exe with 001fd000"

This messages appears quite regularly when encoding divx, howver the numbers in the error seems to vary.

email: akaid24@ntlworld.com

thanks.AQ

Recently, TMPG started saying that all output, no matter what template-mcf file I load, the output will be like 20349203492GB... It gives a huge output filesize no matter what source MPG file I use, or what template I try!!??
Never had this before, and it just started recently?
I am trying to encode a MPG that was off of a DVD, and encode it with like a Kvcd or CQ template but having the same issue..
Thanks for any help
Ross

I guess you get this problem when useing the Wizard so just don"t use the wiZard cuz if you are useing CQ then the file size prediction will not be accurate anyways, as long as you can encode your files properly It doesn"t seem like a very big problem.......

Why do some movies read much larger than real size??? For example: a movie thats 120 mins reads that its 384.

>Why do some movies read much larger than real size??? For example: a movie thats 120 mins reads that its 384. Ok the movie Oceans 11 is, 1h and 56 min (690mb 1 disc/file) TMPG reads it as 381 mins or 6hrs 35 min. The movie Kiss of the dragon is 1hr 38min (698mb 1 disc/file) and TMPG reads it as 256min or 4hrs 26min. Both are divix. Is it a TMPG bug? Something not yet supported? Or am I missing a setting?

When i encode Divx fils to Mpeg layer2 i seem to get the following error, usually between 2% - 25% into encoding . Please help.

" Write Error occurred at Address 00486f76 of muduke tmpge.exe with 001fd000"

This messages appears quite regularly when encoding divx, howver the numbers in the error seems to vary.

email: akaid24@ntlworld.com

thanks.AQ

Hello,

I begin in data processing, in particular for encoder of films. I succeeded in passing from the DIVIX to the MPEG, but the problem, it is that I do not manage to obtain from sound.

Thank you for your assistance because I have really difficulties in find the solution.

Prescilla

The problem is that your Divx file have a unsupported audio format, you will need to extract the audio from your divx file to a wav file with "virtual dub" and use the wav for your audio source, but if the audio is AC3 then you will need an AC3 decoder to extract the audio to wav........

If the movie is whit ac3 sound you just go to
Option / Environmental setting / vfapi plug-in
Locate the DirectShow Multimedia File Reader
Right click on it and add a higher priority like 1 or 2

And you got sound whit you movie

Can someone point me to documentation about the Deinterlace options?

The filter selection tool works fairly well but slight flaws in motion still seem to show up in the final product even with nothing visible in the TMPGenc viewer screen.

Deinterlace filter options include Even Field, Odd Field, Adaptation, Double, and the children of all these options.

Thanks,

Dee Tent

Here is a BBS on de-interlaceing maybe it will help..
http://www.geocrawler.com/lists/3/SourceForge/4574/0/

VirtualDub + selected plugins has much better deinterlace options. Use built-in (blended) deinterlace for low motion footage or Smart Deinterlacer (interpolated) followed by Hi Quality Smoother if non-blurry still frames are required.

The latter method is slow but produces unbelieveable results on clean video (set motion threshold low in the deinterlace options). You essentially end up with 30fps progressive video at a high shutter speed.

Frameserve the result to TMPGEnc

when i convert from avi to vcd the vcd always comes out pink
can anyone help

cheers

This is probably because you have the "Angel Potion Codec" installed on your machine, the "Angel Potion" Codec has a wierd reaction with Tmpgenc and causes pink and purple discoloration, so to fix this you need to Delete the Codec then re-encode your file to VCD....

hi,

how can i make an avi file to an mpeg1 file, because i want to burn my movie on a video cd to play it on the dvd player in 16:9 format, the avi file is ind 16:9
i tried it with tmpgenc but it doesen`t work there is only 4:3 format

i hope somebody can help me how i make a avi into 16:9 mpeg1

:)

If you want 16:9 when you se VCD on a DVD you must go in to
sittings and set size to 352*340 aspect ration to 4:3 NTSC/PAL then
you clik the tab advansced and set Field order to Top Field first (Field A)
Then you set Source aspect ration to 1:1 (VGA)
Video arrange method you set to Full Screen (Keep aspect ration)

and all this is only if you have a 16:9 format AVI file

You will get a MPG file with Black bars and the 16:) movi in the midle
the most new 16:9 tv's have zoom so you can se 16:9 movies
The DVD have it to I think

Good Luck

From The Killer(DK) From DENMARK ***PEACE OUT***

you mean 352 x 240. ^_^