When are you going to support more up to date audio formats like Dolby True HD/Atmos, DTS HD etc. ??

You keep up to date with the video formats like Hevc265 4K, 8K etc yet for some reason you stick with only old audio formats like LPCM, mpeg 2, and Dolby Digital 5.1 which is from the SD DVD days!

This lack of support is preventing me from upgrading from SmartRender4.

Hi Sir/Madam,

I try to convert the video (ts format) to ----> H.265 MKV file.
The video resolution is 1920x 1080

But I found the output file screen is scratches, many small error square holding on the screen in MKV file.

I checked the original file (ts format) by same video player software, but it is normal and no any error/scratches in the same part, so I report to you about this bug issue.

I tried 2 times to convert the video, but still find the same problem in the output file(MKV)

Below is the capture screen between the original file and after encoded file result and send for your comparasion.

1) capture screen (by TS format)
Link :http://firestorage.com/download/1d67a30a40d77531d07efbf2ee6013bee3f2ac5e


2) capture screen (after encoded by TMPGENC Video Mastering Works 6)
Link : http://firestorage.com/download/9b422034b9b01e9f921e83e289e30b45158fb24d

If you need more information about the video, please free feel to contact me.
If I can provide any information, I am willing to feedback.

Will you can fix the bug in after version?

Jason
Best Regards

Dear Admin,

For your more information.

I have just tested other programs "mkvtoolnix" & "VidCoder 4.35" to testing whether there is the same problem.

These 2 programs are help to convert *.ts format file to MKV file (H.265).

However, it is no such problem.
So I believe it is a bug in TVMW6_Trial_6.2.10.37_setup_en.

hi im trying to capture video clips from a panasonic hdc-hs25 hd cam with my tmpgenc5 sw but it's not letting me capture more than 200 clips. anyone know if newer version (6) of sw can do this? or how i can do this with tmpgenc 5?

I think 200 is the limit for version 6 as well.
If you can combine them into one video, that could work. In other words, import 200, output as one video, then create a new project with the rest of the clips and the combined clip.

Whenever I try to do a Constant Bitrate encode using the Intel QuickSync it always gets to 16/X frames and sits there while the total completion time keeps climbing. For example, my encode has been sitting for 20 minutes at 16/163840 frames and is showing a completion time of 1380:42:00 and climbing.

It does this for every CBR encode that I try regardless of the original source video size/length.

I'm on 6.0.9.11

Any help, please?

(cross-post from TAW5 forum)

When I choose Shutdown as finishing task, it seems the system goes idle instead of shutting down. (this is Windows 10 / 1803)

The only visible track left by this action is in the Windows System log:

Log Name: System
Source: User32
Date: 18/03/2019 23:46:51
Event ID: 1074
Task Category: None
Level: Information
Keywords: Classic
User: XXXX\Benoit
Computer: XXXX
Description:
The process TMPGEncVMW6.exe has initiated the power off of computer XXXX on behalf of user XXXX\Benoit for the following reason: Other (Unplanned)
Reason Code: 0x0
Shutdown Type: power off
Comment:

the next event in the System log is only 8 seconds later and is an information-level event from 'Time service', but also in the Application log an event 102 from ESENT where 'The database engine (10.00.17134.0000) is starting a new instance (0)'.
This would suggest a reboot instead of a shutdown....although I see no clear event related to a reboot (e.g. events from the kernel; and 8 seconds seems a bit short for a reboot anyway)

Is there a way to check whether I need to enable the option to allocate higher bitrate for DVD subtiles, without carefully watching the whole film with subtitles turned on ?
Feature film is pretty long, has already been carefully encoded and hence I would like to avoid re-encoding with a lower bitrate for the video, to allow higher bitrate for subtitles.

In case of insufficient bandwith for subtitles, will dropped subtitles occur with software players as well as with home DVD players ?

help ???

Does any other company make 3rd party filters to use in the software?

Not that I know of. As far as I know, the software is not set up to accept 3rd party filters. Would be cool if it did though.

Well, you can use AviSynth and its myriad tricks and filters, right? A bit complicated to set up.

Hello.

When I'm in 'cut' of video file, I suffer from long time to load thumbnails in seek section. When I jump into some point in video, it takes 5-15 seconds for thumbnails to appear. That siginficantly slows down work. Changing time of thumbnails distance doesn't accect. Once I scrolled through video, thumbnails are generated and it's fast. So I would even like to have them generated it production tool or so, so when I start working with clip I already have them.

Are there some factors to change, to make that faster? I have to seek a lot through long file it really affects me.

I see that during seeking, while thumbnails are generated, CPU is loaded signigicantly, 4 cores at 40-50%. Once thumbnails are generated, CPU load goes down. I tried to use GPU/Intel video decoding, but it didn't change anything.

I created RAID0 array from SSDs, to have huge read/write time but it didn't help.

Interesting is that when I jump into somewhere in the file, in preview section I immediately get image, so I assume this can be done almost 'online'. The same I would like to have in thumbnails.

I tried this wit several different input sources and it's the same.

Is there something I can do?

My system is Xeon E5-1620, 16GB RAM, GTX1080.

Have you tried increasing the Thumbnail Cache Size in the preferences? Maybe it will help. It's in Preferences--> Clip Editing.

Couldn't read MKV with h265 video in TAW5. Upgraded to TAW6 but reading MKV file extremely slow and sometimes crashes the app.

Installed Shark007 and TAW5 works great but no change in TAW6.

Windows 7 64-bit, i5-3550, 8GB memory, 500GB disk available.

Anyone exp anything like this with TAW6?

If I use the Dolby Analyzer and rescue 5.1 audio, my audio sync is off by a large margin. If there a fix for this or is there a manual adjustment I need to make?

Hello,

I would like to make several montage with the same editing structure. How can I replace the clip source without cxhanging their duration ? if I just change the path, it changes the duration and remouves the transitions.

many thx

I've been using Authoring works 5 for a few years with no problems. (I purchased a license and it's a legit installation). Today when I tried to write a DVD project I got a popup that the "Disc Writing Tool Could Not Be Started. It is possible the installation is not correct"

Any ideas? I downloaded the install file from my Pegasys account and tried to re-run it, but there is no "repair" option of course. I can only fully remove the program. My next step is to try to remove it and then install again from scratch, but it's annoying that this happens when I'm in the middle of a project that is due in a matter of hours.

Any solutions out there? I can't get support from Pegasys any more because they don't support Authoring Works 5.

Try and use a general contact form from their website and they might help you out even though it's an older product. No guarantees but it's worth a shot.