Im using the latest version (2.511) of tmpg but ive noticed that every now & again in an encoded film i get discolouration in dark areas, i encoded harry potter 2 as the dvd film is (no clippin, no resize) just to bring the size down to a single layered disc.

Any ideas on this problem ?

by the way i am framserving from dvd2avi.

There are Other ways to Make a Retail DVD Fit on a Single DVD-R while retaining all of the Menu"s and chapters, Programs Like "DVD2One" and "DVD-Shrink" can do it very well and DVD2One can do it very Fast Like in Just a Few Minutes..But if you are getting Bad Discoloration then that can be caused By Haveing a Bad codec installed on your System ,The codec is called "Angel Potion" if you have it you should delete it as it causes Purple and Pink discoloration on encoded files, But it really shouldn"t have a Problem useing D2V files, Make sure in DVD2AVI you have the colorspace settings set to "Yuv" and to "TV Scale"....

@yamyam
Minion is right, but there's an other possible reason for lightened dark areas if you are using DVD2AVI. What settings did you use? RGB-Colorspace or YUV? TV-Scale or PC-Scale? That's important!

I was using YUV - PC Scale all the time but at the moment im encoding the movie again with YUV - TV Scale to see if this makes any difference, never used the RGB setting. Hoping TV Scale Will cure my problem.

I recognized problems to insert a source mpeg which is greater than 4 GB. Is there a limitation? It should be possible to import a 4,4 GB movie when the DVD-disc has 4,7Gb capacity!

Maximum File-Size for DVD is EXACT 4.37 GByte (4.700.000.000 Bytes, (OK, a couple of Bytes more, but thats not important in this case)).

yes, that´s right. But it should be possible to import a file which is larger than this. You can cut commercial advertising from the beginning, from the end and maybe in the middle. And my recordings are often 15 min. longer then the duration of the movie. I want to cut the movie in TDA so that it is not larger than 4,37 GB. In fact, I can even not import a 4,1 GB movie.

Is there anybody else who has problems with files larger than 4GB?

By the way: Of course I have XP and NTFS. It really seems to be a limitation of TDA.

I had no problems importing m2v files of 4.8 Gb.& more .Then cut out commercials and unwanted scenes.I always use demuxed audio & video files
for importing

Had no problem importing 5.2 Gb of m2v (generated by TMPGenc), then cut out bits and peaces until it would fit to 4.3 Gb (the label on the DVD says it is a 4.7 Gb which is a joke). My pc is P4, 2Ghz, with XP pro, 2 IDE HardDisks and one 200 Gb Firewire.

When trying to convert an NTFS AVI to PAL MPEG 2 using system(video-audio) the final MPEG has no sound when using the same avi for video and audio. Extracting the audio to wav using VirtualDub then using this wav as a separate audio file to create the MPEG leads to a file with sound out of synch by about 1 second after half an hour. Any suggestions

Firstly you can not use Tmpgenc to Properly Convert from NTSC/Pal,It just doesn"t work Properly, Tmpgenc Does not do Proper Frame rate conversions so when watching your Movie on TV you will get a Jumping or Skiping effect about every second or so.You might not see it Now But you will Once you are Watching in your DVD Player,If you watch it closely now I"m sure you will Notice it, And Trying to convert NTSC/Pal with Tmpgenc Can cause Sync Problems like you are getting....You can use AVISynth to Frameserve the file and use it to do the NTSC/Pal conversion But it is a Complicated tool to use if you have never used it, if you have a Good Video editor Like Vegas 4 or Premier you can use it to convert NTSC/Pal, Or if you can get a Copy of ProCoder it does good NTSC/Pal Conversions..There are also a Couple of other methods that Entail Changeing the Framerate of the AVI file then Changeing the length of the Audio to Match the Video...

Version 2.511 unstable?
TMPGEnc 2.511 may hang (blank window, TMPGEnc not responding, HD LED permanently "ON", processor load 100%) after quite some time of successful encoding. Strange: After a couple of re-starts the encoding of the entire movie my eventually succeed.
Never had this problem with older versions.
P4/XP/DX9/80GB HD/512MB RAM.

Hi.

Same problem for me. With 2.511 version, sometimes encoding is ok, but some other times not. I have dual processor and I discovered that if I disable multithread the hangs almost dissapear, but not completely anyway.
I hope it will be fixed in the following version.

Regards.

There seems to be a Bug in the Multi-threading in this Version so Poeple with Multiple Processors might find Problems useing the Multi-threading ..I would either just disable it till the next version comes out or use an older version till they fix this one...

With a couple of AVI file I receive a very green screen in TMPG while converting it to MPEG. What can I do to prevent that?

You will have to tell us a Bit more about these AVI files you are haveing Problems with, Like there Compression and were they are from, But off the Top of My head I would say that you should first try Raiseing the Priority of the Direct Show File reader in the Vfapi Plugins to about 2...

It concerns some XVID MPEG-4 coded files. They look very greenish and the pictures are as well unclear.

This is often a problem when using an older xvid codec to run newer xvid encoded videos. Uninstall the old codec, and download and install a new build of xvid.

What Might be better is to Install the FFDShow Filter, it decodes all Mpeg-4 and Other Formats usually better than the actual codecs do pluss it has a Lot of usefull decodeing options to optimize Playback Quality...

I want to create a MPG from AVI file so I can make a VCD but when I try the new file I created all I have is sound with no video.

Sounds to me like you don't have the appropriate codec. Go to http://www.dvdrhelp.com/ and scroll down to Tools - try installing the DIVX 5 codec.

i have the same problem and i already have divx 5, are there any other ideas?

I am trying to compress uncompressed AVI (captured home video) to S-VCD (NTSC). Since I am beginner in this, I used "Project Wizard" with default settings, which resulted in output file with equal width and height, as if original aspect ratio (4:3) was somehow changed to 1:1. I checked all the settings and found out that even though source file had aspect ratio 4:3 525 line (NTSC, 704x480), output had video resolution 480x480. I tried to change this setting in various menus but it was always greyed out. Does anybody know a way to achieve same aspect ratio as original file? Thanks in advance.

The Standard-Resolution for NTSC-SVCD IS 480x480. Don't worry, DVD-Players will stretch the Picture back into the right format.

If you want the Image size to be displayed in the Correct aspect ratio go to "Video Arange Method" in the Video settings and set it to "FullScreen Keep aspect Ratio" and another way that will Display it in the correct aspect ratio But with Black bars on the top and Bottom which Might look better depending on what you are looking for is to set it to "Center Custom Size" then set the size to I think "480+352" is the correct aspect ratio?? This way it will not be full screen but have 64 pixel boarders on top and bottom, you can see what it will look like if you go into the "Clip Frame" settings, but make sure the "Resized image for Preview" Box is checked...

I have downloaded a trial copy of TMPGEnc. I am using this in conjunction with dvd2svcd. When dvd2svcd is ready to launch TMPGEnc, I get "illegal project file". How do I fix this and what is the problem?

Well it seems that there is something wrong with the Project file that DVD2SVCD is makeing..Sounds like a DVD2SVCD problem, Maybe you should check out there forum as they would know more about DVD2SVCD...

Hi, i have problem here. My video has subtitle on it, but it's too low and when I covert it to vcd and I played it on tv, I can only see half of the subtitle. Is there a way that I can resize the video using simple program like TMPGEnc? I know how to do it in premiere, but it's too much hasle. Please advice. Thank you

Yes, You will have to Adjust the "Clip Frame" and "Video arrange Settings" in the "Advanced" settings..

Some AVI files, after the enconding in VCD have no sound. I extract the audio into a WAV file and i repeat the convert AVI2VCD. The sound now is OK but non syncronized with the Video. Can you help me?

Hello

First congratulation for the new Authoring software, i tried it and it is my prefered app now because it's fast and easy.

Some more options should make it perfect.

- Add second audio track
- In cutting window possibility to preview with sound.
- Create and modify menu templates.
For the rest keep it easy

Best regards
Flepp

I agree with all of the above additions, I have not been able to make myself pay $68 for the software as is but if if tools for menu template creation and audio in the scene cut preview were added along with free upgrades for a determined period of time I would be more than willing to buy it. I have used the software for about 2 weeks making about 15 dvd's and I find it easy to use with decent features but when trying to put in chapter cuts, the lack of audio means I have a lot of trial and error trying to get the cut right.

Should be able to save to an ISO image for better burning.