This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
Hey, I was wondering if you can use virtual dub to take an .AVI video file and match it up with its .wav sound file?? Ashy had made a comment on suprnova to me, which by the way was nice of him, but i couldnt find out how to do what he was telling me. Can someone explain?
Ok, start up Virtualdub and load your AVI.
Next click 'Audio' from the options then select 'Wav audio' from the menu and load your wav.
Click 'Audio' again and then 'Interleaving'. Here you will see 'Audio Skew Correction'
This works in millseconds, so if your audio is behind by say 1 second, then to advance it put in a negative value of -1000 ms. If it's behind by 1 second then to delay it put in a positive value of 1000 ms.
'Ok' it and check the sync by clicking the second playback button in the main window.
It's usually best to reduce the first windows size to minimum by right clicking it and reduce the size of the second window also if it's too large. This will make things play back more smoothly.
Once you have found a value that works from beginning to end you can then either use that value in the 'Audio gap correct' in the 'Source range' function of TMPG or you can simply save the wav and use that as the new audio source for TMPG.
>If it's behind by 1 second then to delay it put in a positive value of 1000 ms.
Correction, this line should read:
If it's ahead by 1 second then to delay it put in a positive value of 1000 ms.
Hi,
I have been converting some XVID's posted on usenet from AVI to MPEG using TMPGEnc and I have done 6 now with no problems. I have downloaded FFDSHOW to make it work, and have used TOOLame for the audio conversion. It has worked fine every time.
All of a sudden this time I get no audio. The AVI has audio but it's a little low. When I run it through Gspot it says "ac3 (0x2000) "Dolby Laboratories, Inc". But when I run the resulting MPEG through Gspot is says under audio (under the DirectShow render information): Ligos MPEG Audio Decoder-->Morgan Stream Switcher and "Rendered successfully". Yet the MPEG has no audio on my computer (using WMP to play it) nor when burned and played on my dvd player.
Again, this has not happened with any of the other MPEG's I've come up with using the same settings on TMPGEnc.
I tried one conversion using TMPGEnc's default audio converter and I tried one using the TOOLame converter, both ending up wih no audible sound, although the video plays fine as always.
Have you got the AC3ACM decompressor installed? Without it TMPG won't decode AC3.
TMPG can't use the Ligos MPEG Audio Decoder.
You can check for audio under in the advanced audio controls. Just click the audio EDIT button. If u don't hear audio then u won't get any in output. In that case try raising the priority of the "AVI VFW Compatibility Reader" to top of the list.
>Hi,
>I have been converting some XVID's posted on usenet from AVI to MPEG using TMPGEnc and I have done 6 now with no problems. I have downloaded FFDSHOW to make it work, and have used TOOLame for the audio conversion. It has worked fine every time.
>
>All of a sudden this time I get no audio. The AVI has audio but it's a little low. When I run it through Gspot it says "ac3 (0x2000) "Dolby Laboratories, Inc". But when I run the resulting MPEG through Gspot is says under audio (under the DirectShow render information): Ligos MPEG Audio Decoder-->Morgan Stream Switcher and "Rendered successfully". Yet the MPEG has no audio on my computer (using WMP to play it) nor when burned and played on my dvd player.
>
>Again, this has not happened with any of the other MPEG's I've come up with using the same settings on TMPGEnc.
>
>I tried one conversion using TMPGEnc's default audio converter and I tried one using the TOOLame converter, both ending up wih no audible sound, although the video plays fine as always.
>>Hi,
>>I have been converting some XVID's posted on usenet from AVI to MPEG using TMPGEnc and I have done 6 now with no problems. I have downloaded FFDSHOW to make it work, and have used TOOLame for the audio conversion. It has worked fine every time.
>>
>>All of a sudden this time I get no audio. The AVI has audio but it's a little low. When I run it through Gspot it says "ac3 (0x2000) "Dolby Laboratories, Inc". But when I run the resulting MPEG through Gspot is says under audio (under the DirectShow render information): Ligos MPEG Audio Decoder-->Morgan Stream Switcher and "Rendered successfully". Yet the MPEG has no audio on my computer (using WMP to play it) nor when burned and played on my dvd player.
>>
>>Again, this has not happened with any of the other MPEG's I've come up with using the same settings on TMPGEnc.
>>
>>I tried one conversion using TMPGEnc's default audio converter and I tried one using the TOOLame converter, both ending up wih no audible sound, although the video plays fine as always.
I've tried to compress in MPEG1 from 16/9 DV native format (720x576 at 1.422 ratio pixel) but I always see in 4/3 (with Media Player) with a geometrical distortion (vertical crushing).
I've tried "clip frame" setting cropping 72 lines over and 72 lines under the image with no results.
Looking at some DVDs this evening I noticed a number of compilations are 200 minutes long. Looking at the files they are under 4.5GB in total. The picture quality seems excellent. To make matters worse, the audio is all LPCM, significantly larger than MP2.
By my calculations that would be a bitrate averaging less than 2700KB/S. How do you get the picture quality at 720x576 that good? If I try to make an MPEG that long under 4.5GB the video is going to lose a lot of definition.
I have some MPEG-2 recordings from my DVD recorder with resolution 352x576. I want to convert them into 720x576 but when I try to open the files in TMPEG, it says "File [file].mpg can not open, or unsupported." Can the free TMPEG not convert MPEG-2 to MPEG-2?
Why do you want to convert them to 720x576?
If you intend to put these MPEG2 files on DVD then you probably don't need to re-encode them.
352x576 is a valid DVD compliant resolution as long as the output is 4:3 which is more than likely seeing as your DVD recorder made them, however most DVD players won't have a problem with 16:9 output either.
Re-encoding to 720x576 will simply be a waste of time, quality and quite likely create a bigger file size.
I can answer your original question, but I don't think it is really necessary, just simply author the MPEG as it is.
The free TMPGEnc can only encode to MPEG-2 for a trial of 30 days I think. But the TMPGEnc Plus can accept MPEG-2 as input and output to MPEG-2 as long as you have the MPEG-2 plugin.
I need to master my dvd with Adobe Encore DVD which will only accept 720x576 for PAL 4:3. I installed the free edition of TMPEG yesterday so it should still be able to work but I will not accept this file.
Strangely enough, I'm not even able to open the MPEG fil in VirtualDUB. It says that it detects no frames. But the file plays fine in Windows Media Player and WinDVD.
Does anyone have a clue why I can't open this file in TMPEG?
So you want to use adobe? What kind of DVD authoring program is this that doesn't accept perfectly compliant Mpeg2 files anyway? You can trick this program into accepting the file by using DVDpatcher http://mitglied.lycos.de/dvdpatcher/
Just load the file and change the resolution to 720x576. After you have finished authoring the MPEG just run the patcher on the VOBS and change the resolution back to the origianl one.
If you don't want to go down this route and I can't really see a reason why anyone wouldn't then you will need to install a TMPG compatible MPEG2 codec or use TMPG plus.
You can find the codec you need here: http://www.marumo.ne.jp/mpeg2/
Virtualdub will not open MPEG2 files unless you have the modified versions such as Virtualdubmod.
Adobe DVD Encore didn't want to work with the modified files. I will try to find a different dvd authoring program, maybe Sonic DVD Producer will work.
Can anyone recommend a professional (not a regular consumer program that can only do few things) like Adobe's?
It depends on the level of authoring you want to do.
I use DVDlab which practically does anything though it does have one or two limitations.
DVDmaestro is pretty good, but for total DVD compliance theres only Scenarist.
There is something strange, TDA is 68 dollars for download.
But the box version which includes DVD Source Creator(29 dollars) is only,
69 dollars at Buy.com.
I wonder how they set the prices...
I have a problem...
I want to get a movie (MPEG-2) and a subtitle-file (*.sub) into one(1) file. But the problem is that when I want to preweiv my project in TMPGEnc the subtitles doesn't show. But they do show in Win Media Player!!! Does anyone know what the problem might be???
Try raising the priority of the 'Directshow file reader' to 2 or 3 or try loading the subs directly into FFDSHOW. If that doesn't work you will need to use VOBSUB.
>how do you mean - "load the subtitles directly into ffdshov"??
Exactly as I said load them directly into FFDSHOW.
If not you need to configure VOBSUB to automatically load any subs in the same folder as the movie.
I use vobsub! when I play the movie in mediplayer I can se the green rrow and eberything works fine. But then when I open the movie in TMPGEnc I can't se any subs, nor can I se the green arrow???
Do you know if any settings might be wrong, or what??
i do have a problem.... I've tried raising the priority of the directshow file reader, it's now 3 and it's in the top of the list...
I found a guide on www.dvdrhelp.com that tells you what you should do!
So in the beginning it worked but now I don't know what has happend! It doesn't work any longer... As I said before it works perfect in Media Player, it's just when I want to play it in TMPGEnc it doesn't work... I've tried downloading it again but it's the same result.... Do you have any idea what it might be??
I've given up on FFDSHOW so I tried using VobSub, but that does'nt work! I think it have to be some wrong settings in VobSub or in TMPGEnc, because it works fine when I play the movie in Mediaplayer.
When I start TMPGEnc the little green arrow does not apere.... Why?? It used to work so I don't know what has happend! I've tried using diffrent formats on the movie, such as avi, svcd.....
Look this what I want you to do:
Make sure u have the latest FFDSHOW installed and make sure it is configured to decode the file you are attempting to import into TMPG. I.E. make sure XVID is checked. Uninstall any other MPEG 4 codecs such as XVID, DIVX..etc
Next Click 'Direct VOBSUB configure' in Start>Programs then click the 'General' tab and under the heading 'Loading' select 'Always load' from the drop down menu then apply and OK it.
Make sure the subs have exactly the same name as the AVI apart from the extension ofcourse then check with mediaplayer to see if the subs show.
Ensure TMPG is configured as I have said previously then load your AVI. Goto File>Preview and check for subs, the arrow and subs should now be visible.
I have recently run into the same problem with TMPG. I used to be able to burn all subtitles into my movies with Directshow VFAP set to highest priority and installing DirectVobsub. Was doing this for over a year with TMPF successfully encoding evefrything I threw at it. Started having problems with XVID encoded AVI's. Since more and more movies were coming out in XVID, I searched the forums of Videohelp.com and several other places and they all came up with the same suggestions. Uninstall the Nimo pack codecs (which I used succesfully for quite a while), install ffdshow, configure its codec for XVID, turn on the subtitle option in ffdshow etc. Did not work. The subtitles load automatically in the media players but not in TMPG anymore. Now I can't get TMPG to hard burn any subtitles at all. TMPG doesn't seem to load directshow anymore. I believe I somehow screwed up a registry or TMPG setting. BTW, presently I have the K-Lite Codec pack installed (although I installed the newes XVID codec and the newest Vobsub and directvobsub directly from files obtained throuhg their websites). Every thing seems to work OK except I CAN'T GET TMPG TO LOAD THE SUBTITLES. Would appreciate any suggestions.
i use tmpgenc and vobsub to make divx with subtitles..
NOw When I try to make one, the program close.. when
it try to put the subtitles with vobsub..
help!!!!
i used DVD2AVI to convert to avi files and created a WAV file
now to TMPGEnc: the avi file for the video source; WAV file for the audio source
Problem: during the process of encoding....TMPGEnc suddenly stopped and displayed a message saying it cannot encode any further...it left me with 16 mins of remaining time...(and i waited for more than 1 HOUR!!)....is there anyway i can continue?? or i have to start all over?? and why did it happen??
When i select a source file to convert to mpeg (normal avi file, divx video codec, and wmaudiodecoder DMO audio codec) i get nothing in the 'audio file' field, where normally it would automatically list the same file name as entered for video. When i try to manually enter this file, i get a message saying it can no open this file, or it is unsupported. Is there anyway around this?
What codec do I use for XviD MPEG-4? I only have FFDSHOW and FFVFW. What do I need to check off? When I play the movie, it seems fine but in certain points, there are these trailing purple colors. At first, I thought it was a corrupted file but when I viewed it on another computer, it wasn't like that. I'm viewing this in Virtualdub.
Just make sure you don't have any other codecs installed apart from FFDSHOW. Uninstall XVID, DIVX and 3IVX codecs.
Disable raw video decoding in FFDSHOW also and it may also help to disable FFDSHOW when using FFVFW and Virtualdub.
For FFVFW, I have the Encoder at MPEG-4. Bitrate is 900 Kbps. The FOURCC is FVFW. Mode is One Pass - Constant Bitrate. I only checked off XVID.
For FFDSHOW, I checked off XVID, DivX 3, DivX 4, DivX 5. On the Supported Output Colorspaces, I checked off I420, YV12, YUY2, YVYU, UYVY, RGB32, RGB24, RGB16, RGB15. "Use Overlay Mixer" is NOT checked.
Even if I deselect everything in FFDSHOW and then use Virtualdub to play the movie, the color glitch still appear.
Ok, uncheck all the codecs in FFDSHOW. Check to make sure you have no other codecs installed especially from any of those crazy codecs packs which are guaranteed to cock up your system.
Make sure XVID is checked in FFVFW only. Load the AVI into Virtualdub. Now click file information and check the decompressor info. It should say FFVFW MPEG-4 codec.
Also for now make sure that you don't have 'Directdraw acceleration enanbled under 'Options'
Click the second play button NOT the first and check the output. If you still have the same problem then click 'Options' and select 'Directdraw acceleration'
This time click the first button not the second otherwise playback will be slow, but be aware that this will only show the input video.
As a last resort I would disable FFVFW and FFDSHOW and just simply install the latest XVID codec and see what happens.
If the problem still exists then I can only guess there is a problem with the file itself.
Request
Will you send a/some good (x)SVCD templates?
Maybe some good DVD templates too?
And now your at it maybe some (x)VCD templates?
KVCD... been there, tried that. I'm into quality not quantity.
Question
And to the question you don't like Ashy:
How is the complete syntax of a .mcf file?
As you state in other messages, you have posted, if not all, then some syntax.
I've searched for hours now and read hundreds of messages (that you've answered since late 2001) but no hit.
I would like to make some (x)VCD and (x)SVCD templates/wizards for my kid brother, since he is a newbie to TMPEnc.
On page 1 of the wizard I need the ability to choose from CBR/VBR and PCM/MP2.
On page 4 of the wizard I need the ability to select Video resolution, Average video bitrate, Audio bitrate, Media with Auto setting.
I've grabbed some code from a template, but don't if it's the way to do it:
MPEG.WizardAutoChooseList.VideoSize = <
item
MinVideoBitRate = 0
Width = 240
Height = 480
VideoEncodeMode = MPEGVideoEncoder_VideoEncodeMode_Progressive_32Pulldown
FrameRate = 1
AspectRatio = 2
end
item
MinVideoBitRate = 1000000
Width = 352
Height = 480
VideoEncodeMode = MPEGVideoEncoder_VideoEncodeMode_Progressive_32Pulldown
FrameRate = 1
AspectRatio = 2
end>
Templates received. And yes, I've figured out my self to put the templates in same folder and use the same WizardCategoryName and different SubFormatName. In fact I get a sub category by entering 'xSVCD/xSVCD PAL'.
Templates should have been PAL though, my fault. If you read this Ashy and you're in a good mode, plz post some good SVCD PAL templates.