I am using Plus 2.5 version. I get this error when trying to encode to VCD,"Read error occurred at address 0049EA94 of module TMPGEnc.exe with 00000037. It gives me the error at about 1 hour elapsed time. I am using Windows XP. Is there a way of getting the earlier versions of TMPGEnc? I started having the problems when I upgraded to 2.58 and Plus 2.5 versions. I would greatly appreciate any help.

Go to the VFAPI plugins and raise the direct show to '2'

ASHY

I did that. I even tried it at 3 and I still get the error. Please keep helping me. I greatly appreciate it.

Frameserve the file from Virtualdub to TMPG.

ASHY

I am not using Virtual Dub. I used CladDVD XP 1.3 to create a .d2v file for video and a .wav file for the audio. I load those 2 files in TMPGEnc browsers for video and audio. Then use System-Video+Audio to create a MPEG-1 file to copy on CD-R. Let me know if I should be doing something else. Thank you.

Well that is your problem,you should have said you were useing D2V files...You need to have "DVD2AVI" installed on your system or at least the "DVD2AVI.VFP Plugin...You will know if you have the "DVD2AVI.Vfp" plugin because it will be in the same list as the "direct show" in the "VFAPI Plugins"....seing as your D2V file was made by CladDVD I don"t know if the D2V file will work properly because you have to have the DVD2AVI plugin for that specific version of DVD2AVI and I don"t know what version of D2V file CladDVD Makes..So what you should do is download "DVD2AVI" open up the DVD2AVI folder and copy and paste the "DVD2AVI.VFP" folder into The Tmpgenc folder, then restart Tmpgenc and see if the "DVD2AVI.VFP Plugin is Listed in the Vfapi Plugins..if it is Try loading in the "D2V file but if it doesn"t work you will need to Use "DVD2AVI to make a Compatible D2V file, you can use it to extract the audio from the Vob files or you can use "Vob2Audio"....

Dis-regard that last Re-sponce I totally Mis-understood the Question...Gotta stop drinking Rubbing alcoholl....lol

If you are using a d2v file then there is no point in changing the priority of the dirtect show file reader as it wont have any effect. The setting you should be changing is the 'DVD2AVI project file reader'
I'm not saying this will work, but it's worth a try. It is more likely the d2v file is corrupt.

If you want my advice dump CladDVD and start doing it the best and the right way. Use Smartripper to rip your your movies and use the d2v file that it creates instead and VOB2AUDIO to rip the audio to a wav.

ASHY

I tried CladDVD with a new movie and made DVD2AVI in plugin a higher priority and I still get the Read Error. I downloaded Smart Ripper. When it was done ripping the info, it gave VOB files. None were .d2v and VOB2AUDIO files. When using Smart Ripper, how do I create those files? Thanks for all the help. We'll get it right soon.

You need version 2.41 of Smartripper. This one creates the .d2v file.
VOB2AUDIO is a program you use to rip the audio from the VOBS to a wav file.

ASHY

I used SmartRipper 2.41. It created 5 .VOB files and 1 .IFO file. How do I get SmartRipper to create the .d2v file?

Are you using the correct RIP method when you use Smartripper. You should be using 'Movie'.
The d2v is created when you rip the VOB files. Look in the same folder as the VOBS.
As a hint it is the one with a .d2v extension.

ASHY

Ashy, I clicked on Movie in SmartRipper. When done, it did create the .d2v file. I used VOB2AUDIO to create the .wav file. I loaded the 2 files in TMPGEnc. I did not get the usual error during encoding but when it finished, it said completed 100% but only encoded about 12 minutes of the movie. Now what? I like using CladDVD program because it is very simple and it gives the complete .d2v file and .wav file when done. Your way is an extra step using the VOB2AUDIO to get the .wav file. I am very baffled on why CladDVD used to work and now it sounds like it is screwing up the .d2v and .wav files. I tried an earlier version of Tmpgenc and I still get the read error so it must be the CladDVD program. Let's keep trying. Thanks for all the info.

This is my advice to you which will ensure that things work correctly. If these steps don't work then there must be something else at fault.

Step1. Completely delete TMPG then extract a fresh copy of the latest version to your drive.

Step2. Download DVD2AVI v1.77.3

Step3. Copy from the DVD2AVI folder the file called 'DVD2AVI.VFP' into the TMPG folder where the TMPGenc.exe is located.

Step4. Run TMPG and got to Option>enviromental setting>VFAPI plugins and change the priority of the 'DVD2AVI project reader' to 2 and the others to 0

Step5. Using DVD2AVI itself create a .d2v file (there's no need to create a wav with DVD2AVI so check 'none' under - Audio>Track number.

Step6. Load the d2v into TMPG without the wav and select ES(video only) as the stream type.
Now click File>Preview and move the slider all the way to right slowly to see if TMPG can read the whole of the movie.

Step7. If that part went ok you should now be able to encode the movie.

ASHY

P.S. uninstall CladDVD XP 1.3 to make sure there are no conflict problems.

ASHY

If I encode with Video Only, will the sound be there when done or do I have to load in the .wav file that VOB2AUDIO created and stream type: System(Video & Audio)?

Ashy, I am still waiting for reply. Thank you.

Yes load the wav from Vob2Audio and choose System(Video & Audio).

If you still have the same problem after following all the above steps then it
may be a problem with the VOBs themselves.

I once had a similar problem myself. Whereby the d2v was created from the VOBs no problem, but there would be an error at a certain point every time when encoding. When I re-ripped the VOBS with VSTRIP the problem went away.

ASHY

Ashy, what should the configurations be set at on DVD2AVI program to create the .d2v file. I want to make sure I am doing it right. Also, in Video, should the YUV->RGB setting be set to PC Scale or TV Scale? I want to watch the movie on my TV. I know how to create the .wav file using VOB2AUDIO, too. Thanks for all the help.

I down loaded 5.8 and opened it up i went to set it up and it ask me for a serial number so i put in serial # and it just opened up I don't think it loaded on to my computer i went to add/delete programs and it was't there so i thought it must of loaded why would i get the start page of the 5.8 so i loader a avi file and all i get is a black screen in the preview window but it acts as if it is encodeing a file what am i doing wrong respond otkidd13@aol.com

What do you mean it didn"t load onto your Computer???You couldn"t open it up and Enter your Serial number if it wasn"t on your computer...It probably won"t be in your programs list Cuz It can run as a Standalone application...The balck screen can probably be cured by going to "Options" to "Enviromental Settings" to "Vfapi Plugins" and Raise the "Direct Show File Reader" To "2"...

TMPG doesn't install. It runs as a standalone program. The other problem you are having can be solved by using Minions advice.

ASHY

I get this error "write error occurred at address 77F536F7 of module 'ntdll.dll' with 00000000" when i go to create i VCD can someone help me

answer back at rvis@unitz.ca
thanks a million

Hello friends,

I want to burn my video into 16:9 widescreen movie (my source is 16:9 too) but I don't know how to. When I go into Make dics Options - Compression, I see Media type list is blur, so I cannot select 16:9 as I want to burn.

If anyone knows, please help show or teach me what to do.
Thank you very much in advance.

Ferrymost,

If you are talking about "ulead DVD workshop" then you are in the wrong place but heres a Tip, you need to Make a Custom Profile to set it to 16:9...

Thanks for your kind reply but in fact because I don't see any so that I can set my profile 16:9. It's blur. Another forum also no reply.

Thuydinh,

Mpeg file flags determines whether the title is 16:9. Use TMPGEnc to encode (it is MUCH better) and set the aspect ratio in the Setting/Video sheet. Make sure DVD Workshop does not re-encode. There are some tools for fixing mpeg files on digital-digest.com.

Don't trim the beginning of the title in DVD Workshop because it will lose the 16:9 setting.

I author Leno Show music captured from a Hi-Def tuner and the result looks VERY close to the Hi-Def broadcast when played off the DVD. On a computer, it blows people away since they are used to ultralow def.

Does anyone know how to produce a .WAV file from a movie that uses the DTS audio format? thanks -Don

As of now there aren"t any Programs that will Decode a DTS File to WAV..There is a program that will Encode to DTS called "SureCode DTS" But I don"t think it will Decode to WAV...

Except Graphedit, which I think is to complicated for a beginner to use.

ASHY

well...I just wanted the .WAV...I didn't care about if it came from DTS or the AC3 format... I just wanted a .WAV, but you guys solved that...in the previous posts.
-Don

Ashy, I posted a while back that I couldn't get the audio out of "castaway". You told me I was decoding the wrong track and gave me lengthy instructions on how to do it correctly...I am grateful, but they did NOT work.
You also recommended using VOB2Auido...I'd like to...but it doesn't produce the .D2V file TmpgEnc wants...
Can I use DVD2AVI to make the .D2V (project?) file and VOB2Audio to make the .WAV? Will mixing it up like that work?
still confused -- Don

OK...If you ripped the VOB files with "SmartRipper" there will be a ".TXT" file in the Folder with your Vob files in that text file there will be a List of audio and video tracks that are in the Vob files...The first audio track on the list will be track "One"..Look for the first audio track that is "English" and "AC3" not "DTS" then extract the audio track that corresponds with that Number..Meaning if the "Second" audio track on the list is "English" and Not "DTS" But "AC3" then extract track Number "2"...if you want to use "Vob2Audio" you have to use "DVD2AVI" first to make a D2V file, but if you used "SmartRipper" then there should allready be a "D2V" file in with the "Vob" files...I ripped "Castaways" when it first came out on DVD and from what I remember I didn"t have a Problem with it....

You are definitely doing something wrong somewhere. There isn't a DVD on this planet that has DTS as the only audio track as this would be illegal as defined by the DVD specs.

Do as minion suggests and look for the Ac3 track under where it says 'Stream info' in the text folder called something like vts_02_INFO.txt.
It is almost always the first audio track and will look something like this:

Stream[002] X=[[0x80] Audio English AC3(6Ch) 48kHz

Note the stream number, in this case it is [0x80] then choose that stream in VOB2AUDIO.

If you used the latest version of Smartripper you will already have a .d2v file in your VOB folder. If not create one with DVD2AVI but check 'None' under Audio>Track number. This will create a .d2v without the wav file.

Now simply use the Wav from VOB2AUDIO and the .d2v from Smartripper or DVD2AVI in TMPG.

As a note this is the best and fastest way to rip a DVD and is the way I use and hardly ever have any problems with it.

ASHY

Ashy, I searched the .txt file, and "stream 3" is the first audio track that is AC3 and english...does that mean I want track 3?
using DVD2AVI to make the .D2V file and VOB2Audio to make the .WAV file worked fine...
I never knew that Smart Ripper made it's own .D2V project file...can TmpgEnc use that?
thank you...I have learned something again.
-Don

Yes you can use the .d2v file that Smartripper creates and VOB2AUDIO for the wav. Just don't delete DVD2AVI as it is still required to decode the VOBS.

Did everything work OK?

ASHY

Please offer any suggestions as to why my movie starts rendering black after 9 mins.


I have a 12 min home video that runs just fine in the AVI format. I put the AVI into TMPGEnc for encoding into MPEG-2. At the 9 min position of the video (Which is 1 hour into the TMPGEnc encoding) the video turns black and continues to encode black till the end of the file. If I edit the movie (for trouble shooting purpose) so it contains only the section that begins playing black, make that section into an AVI, place it into TMPGEnc and render with the same settings, that movie section looks fine.

I edit my home movies with Premier 6.0 to AVI, render them in TMPGEnc V. 2.5.44.152 to MPEG-2 using the same settings (exception being I select video+ audio as the stream type) suggested in the tutorial supplied by http://pwp.netcabo.pt/0165394101/TMPGEnc_Template.html

I have had excellent success with all my other home movies which have been up to 15 mins long.



System: ABIT KG-7 Raid MB, AMD Athlon XP 1.7, 1Gig Crucial ECC 2100DDR ram, 32Mb Asus V7700 GeForce Deluxe AGP video card, C60Gig IBM 75GXP, D100 Gig WD BB E120 Western Digital BB, FPioneer 104, GPlextor 16/10/40a, Enlight 7235 case W/ Enlight HPC-300-101 PS, Soundblaster 5.1, 1394 Firewire card supplied with Studio DV, Win 2K Professional OS

Camera: NTSC Cannon Optura Pi, Full-Rez DV capture only, Microphone for Camera is Cannon DM-50


Thank you ..........

Raiseing the "direct Show File reader" could help with the file turning black...go to "Options" to "Enviromental Settings" to "Vfapi Plugins" and raise the "Direct Show" to "2"...I"m more concerned with why it takes 1 hour to encode 9 minutes of video..On your System it should only take 10-15 minutes on High quality to encode 10 minutes of Video...

I Raised the direct Show File Reader to 2 but the video still came out bad. I saw in the options that a recently loaded program called "DVD2SVCD" had added some stuff to the "Vfapi Plugins" list. I removed the "DVD2SVCD" program from my system. Now the video will encode properly. I will do more troubleshooting on this as the video still took 2 hours and 24 mins to encode. I will post more here when I have some findings. Thanks much for the help!!!

I made a rather large DVD quality rip of a movie. It came out to about 2.3gb in mpeg-2 format. I want to split the movie up into 4 segments so I can burn them to disc. However, when I use the mpeg tools included with TMPGEnc, and split the files, something goes wrong in the playback.

When I play the split files one by one, each of them stops playing video after 5 minutes or so, yet the Audio keeps on streaming normally. So Ill reach a point in a scene and the video will just freeze on one frame of video, but the soun keeps going.

Anyone know what causes this? Im using Windows Media Player to play the file, which works fine on all DVD and MPEG files Ive used before.

Thanks for any help.


WINXP
1800+ Athlon XP
GF2 Pro
GTXP Sound
512mb DDR

Well you can split a 2.3GB file into 3 parts and fit it on 3 700mb 80min CD-R"s (3 times 800MB=2.4gb)The problem is With the "Mpeg Tools" so you need to use a Different Mpeg editor..The mpeg tools are quite buggy at times you can try to re-install tmpgenc or use a different version but the best thing is to find a Reliable Mpeg editor...Mpeg2VCR is good but it adds To much padding to the edited mpeg stream..M2-Edit pro 5 is good but it costs $1500 US...There is a Good Mpeg editor that comes with Power VCR...To view your Mpeg2 files you shouldn"t use "Media Player" cuz it doesn"t display the true aspect ratio or resolution of the file....Use "Power DVD" or something simular...

I have a similar problem. Sound stops - video goes on. I'am working with files created with hauppauge pvr. Sometimes (if there are some activities on the pc) the pvr-encoder cause some errors in the mpg-stream. If tmpgenc finds such an error it will either stop imediatly or continue without error but in the resulting file audio stops.

There is no problem to convert such a file with tmpgenc's encoder to annother format (e.g. VCD) - seems to be a special problem in tmpgencs cutting engine.

I found a workaround for the second error: demuxe the mpg file. take the resulting mp2 file and encode it with tmpgenc (audio only project).target mp2, same bitrate as input (or lower....) - remux mp2 and mpv - and there is sound !

For mpeg-2 input I'am using ligos decoder - I've also tested others - no difference in behavior. Prehaps Mr. Tsunami (thanks him a lot for his great great work!!!!) can fix this in a later release ????

Klaus Deiss

I'm using an avi file and I'm trying to change it into a MPEG-2 NTSC cbr 4000kbps and in the middle of encoding I get an STREAM WRITTING ERROR what causes this error and how can I fix it. Hey and how do you fix the purple screen you get when changing an avi into an MPEG-2

If you are getting a Purple screen then that can be caused by 2 things either you have the "Angel Potion codec" installed on your Machine which you should delete or you just need to raise the "Direct Show" file reader in the "Vfapi Plugins"...I think Stream writeing errors happen when you run out of Disk space..But I"m not sure if this is your problem so check to see if you have enough disk space.

No it not that I got lots of space at least 30 gb but I still get it. How do I check direct show vfapi plug in?

Well if you don"t have the "Angel potion Codec" then raise the "Direct show file reader" by going to "Options" to "enviromental Settings" to "Vfapi Plugins" and raise the "direct show" to "2"...

I the tmpeg program? How about the stream error?

And what happens if we don't have the plugin. I mean I downloaded it but I don't think I installed it properly. How do you install it.

hey, i'm having a sound problem with making a magnolia mpg. i used dvd2avi to create a wav file that plays fine. however, when i try to create an mpg with tmpgenc, the video plays fine but there is no audio. i've tried doing it 3 times but i can't get it to work. everything has worked great on other movies though. any thoughts?

Is the wav actually loading into the audio field?

Try raising the priority of the wav reader in the VFAPI plugins.

ASHY

And if all elce fails use something elce to encode the audio to mp2...

Ashy Ive been having trouble encoding episodes of a programme called dragonball Z! what happens is if i leave the direct show(enviromental settings) at -1 it does not recognise the avi files! But if i change the direct show to anything else the sound starts to jump! Playing for a second then being silent for a second! This continues through all the episodes i have done. I got told to use virtual dub for the audio and change it into a wav file. But sadly this does not help! Is there any way of sorting this as I never used to have this problem. Thanks In advance!!!!

What format are the AVI's in and what format are you encoding to?

When you extract the audio to a wav file does the wav file play ok in media player?
Have you tried raising the priority of the wav reader also?

If all else fails just encode the the movie without audio then use either dbpoweramp or MPEGDJencoder (much, much faster) to encode the audio to MPEG2 and multiplex the 2 files together.

ASHY

I'm in a position where I can capture home movies through my Matrox capture card, run through TMPGEnc and author menu's with Ulead Movie Factory.
I tend to use the settings already set for me but wonder if I can achieve better quality by playing around.
I don't understand interlacing and deinterlacing, could someone tell me when and when not to use this?
Thanks,
Will

If possible capture to your card without using interlacing this is called progressive frames. It will save you many problems later.

If you intend to watch the output on TV then use interlacing. If it's for monitor only don't use interlacing (progressive frames)
Having said that most DVD players are capable of playing progressive sources anyway, but DVD specs require MPEG2 sources to be interlaced.
MPEG1 is usually progressive.

ASHY