This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
TMPGEnc 4.0 XPress BBS [ Sorted by thread creation date ]
Please see my comments/questions at the end of Nick's excellent thread, "PAL DV-AVI source files not read correctly" (even though PAL had nothing to do with the problem, which, I'm guessing, was an oversight by TMPG to change a registry key).
I just bought the product XPRESS, and put the disk in, but
it is not being recognized. I'm running W2K.
I had downloaded the "free" tmpgenc, but it didn't seem to be able
to encode a fairly largish file, 2.3 Gb, so I went out and bought
the product.
I would have downloaded it, but I already did that 3 years ago, and
cannot locate my license number, and the msg I left for the support
line hasn't been returned (I've left 2x). Also the support web address,
www.tmpg-inc.com/support/
didn't work.
How to proceed?
Dang. I spent WEEKS of time off work making this video
dang.
I have been searching and have not found any. There are a handful of guides out there, but none that I have seen on version 4.0 yet. I have been working on doing the same thing with DVD to WMA. I think I have it down pretty well, I just need to see how it looks in HD. If you ask me, I think Tmpg-inc (or someone else) should create a site where users could post their templates (profiles) and people could freely download them and rate them while making comments or suggestions. The best templates would float to the top of the rankings and people could greatly benefit from them. I think a feature like this would help to sell more of the company's product and therefore be very beneficial to them.
I agree. 4.0 xpress is very adjustable, which means it's very miss-adjustable. There needs to be some guidence on how the various perameters are selected.
I'm looking at this product to reduce the bitrate of HD (1080i) home movies so they can be played from a 16X DVD player and still preserve the best HD quality I can. I've been fussing with the trial version for a few days, but I'm about ready to give up. Some guidence would help, or a profile that has been optimized.
I bought the DIVX pro codec to use with Tmpgenc 4.0, but so far I've gotten better results by just using the the little DIVX converter I bought as well.
I like the TMPGEnc encoding better in many ways. But i fail to get the same levelmapping for my RGB files, that are possible in CCE with a lumens setting of 0-255, instead of 16-255 so i can keep the desired dynamic range.
Is it somehow possible to force/change TMPGEnc Xpress 4.0 to use 0-255 level mapping as CCE does, and how is it done?
after authoring a DVD which was encoded with TmpgEnc 4.0 Xpress, the resulting movie pauses for a split second and drops out the audio for a split second immediatly (around 1/2 second) after play start or after a chapter point is selected.
I noticed this in all projects I done so far and tested in 3 different standalone DVD players, all display the same problem
when doing the same encoding with the same settings using TmpgEnc 3.0 Xpress, there is no such problem (constant quality, 7500max and 2000min and ac3 audio at 256) I also tried 7500 constant bitrate
I tried this several times with different source files and the result is always the same
back to using TmpgEnc 3.0 Xpress until a patch is available
I am having a similar problem. Except V4 will just hang then crash. I sent samples of my TS files and haven't heard anything other than I should re-encode the TS to mpg and try again... I don't know about you, but that's the lamest response I have ever received from you guys.
XPress 3 works fine but I don't like to pay for v4 if it doesn't do at the very least what version 3 does. Make sence?
My source video is all PAL DV-AVI, 720 x 576, 25fps, interlaced. Unfortunately TMPGEnc 4.0 Xpress is reading them as 360 x 288, 25fps and defaults to "progressive". The "analyse" button is unavailable so I am manually changing display mode to "Interlaced, lower field first". But the "Source format" is still shown as 360x288.
It shows that the "DirectShow file reader" has been used. Perhaps the problem is related to the file reader.
TMPGEnc Plus 2.5 and Procoder 2 both read my files correctly.
How can I fix this?
There is screengrab showing the incorrect clip information here:
Thanks very much for that Anton. I notice your system uses "AVI file reader", not "DirectShow file reader".
I got this reply from TMPGEnc support:
> Thank you for your email. We have downloaded your test file, and also
> viewed your image. We were able to import the test file with no issue,
> and therefore have come to the conclusion that your DV codec maybe
> corrupt. We used a codec analyzer program called G Spot, and think that
> maybe your " qdv.dll " file maybe at fault. If you could please
> reinstall the qdv.dll, it should read your files properly.
> You should be able to find a qdv.dll file online somewhere.
I tried installing qdv.dll files from 2 laptops but the problem persists. I also tried replacing quartz.dll. I also temporarily installed TMPGEnc 4.0 Xpress on my laptop and it reads my files correctly and shows "DirectShow file reader" as the source format. So something is wrong with my system.
I ran Gspot on the file on both the laptop and the problem system and everything was identical.
Here are the screengrabs showing all of the output from Gspot:
I have a lot of software on this computer. Much of it is video related, including Sony Vegas 6, Quicktime Pro 7, Windows Media Player 10 and it has all been working correctly.
What else can I try? I really don't want to make a full system reinstall if I can help it.
> Thank you once again for your email. We suspect that maybe one of the
> codecs is in conflict with another.
> Therefore, eliminating 1 or another codec process, it maybe able to read
> it properly. To do so, if you could please access the "File Input
> plugin" section in the Preference section at the right top side by
> clicking the OPTION button. Once you have openned the File Input plugin
> setting area...please uncheck,
> either the "AVI file reader" or the "DirectShow file reader", one or the
> other not both.
I had tried this previously. If I disable the DirectShow file reader (or all the file readers except the AVI file reader) then TMPGEnc Xpress cannot open the file at all. It will open the audio part only of my AVI files that have audio.
If I disable the AVI file reader (or all the file readers except the DirectShow file reader) then I have the same problem with incorrect resolution.
Here are 2 frame grabs from "AVI settings" showing my codecs:
They are shot on a Sony VX2000 PAL camera as 25fps interlaced and they are captured as a "Type2 DV-avi file" in Sclive 2.1.
Some of them are edited in Sony Vegas 6 and then rendered from Vegas as PAL DV-AVI using Vegas' built in DV codec and some were rendered as Microsoft DV-AVI from Premiere 6.5 but they all have the same problem.
A tiny test PAL-DV-AVI file of your footage would be greatly appreciated. My email is in the link next to my name.
Someone else today reported that a 9Mb music file was bounced. I don't know why. Any chance of sending it by www.yousendit.com instead?
By the way I do have the Canopus DV codec because I have Procoder but I thought my other DV codecs etc would be able to DECODE your file anyway even if I don't have the Canopus codec? I might be wrong on that. The MS one will be well worth testing anyway.
Thanks very much for the files Anton. I got a reply from support and my problem is now fixed!
> We think we may have figured out the issue. We think that maybe the
> default display setting for the file may be set to 360 x 288. If you
> could bare with me and check something for us.
>
> *Be sure you have TMPGEnc 4.0 XPress closed before you do this.*
>
> 1. Go to the "Start" button of your computer.
>
> 2. Select "Run"
>
> 3. type in the window "mplayer2.exe" and click OK
>
> 4. This will start Windows Media Player 6.4
>
> 5. Open the file that is in question in this player.
>
> 6. Once you have the file open in the player - Go to "File" at the top
> of the screen, and then go to "Properties".
>
> 7. Inside "Properties" select the "Advanced" - inside here please select
> "DV Video Decoder" in the list and then click on "Properties"
>
> 8. This should open the Quality selection - Here select the "Full (NTSC
> 720 x 480 PAL 720 x 576)" and then click OK.
>
> 9. Try to import the file in TMPGEnc 4.0 XPress and see what it displays.
As they suspected mine was set to "half size" and by changing it to "full size" it fixed the problem.
By the way Anton, the way things WERE set up on my system your Canopus DV-AVI file displayed at full size (in old Windows Media Player 6.4 it uses the "Video Renderer" filter which has no size to set) and your Microsoft DV-AVI file displayed at half size because in WMP6.4 it uses the "DV Video Decoder" filter which had the half size set.
Nick: I had exactly the same problem when I first tried to view a miniDV tape that I had captured in Roxio EMC7.5. That showed a 720X480 file, but TMPGExpress 4 only displayed 360X240.
It's a brilliant solution, but it's not our responsibility to go through such a common problem, it's the company's responsibility!! They are an incredibly opaque company (Japanese or not), and even finding this bbs was a real challenge.
------------------
I'm just starting to use this after upgrading from TMPGExpress 3, and so far I've seen nothing but flaky behavior. CAN SOMEONE TELL ME HOW TO USE THE SCENE DETECTOR? I've double-clicked the thumbnails until my finger is sore--in every combination I could think of--but to no avail. I did this with several avi files, but nothing ever happened.
There is supposed to be an editing password on this "hidden" bbs, but like so many other things about TMPG, I'm finding it's flaky, and when you enter your password to edit & hit "authentication", nothing happens.
The edit I was going to add was that even the thumbnails don't properly display for the mpeg files I tried.
I'm thinking of demanding a refund and reactivation of my VideoXpress 3.3 Has anyone found any redeeming features for 4.0?
I had a copy of TMPGEnc Xpress 3 & 4, but it got deleted by mistake. And i need to work on it. The company's lines are always busy. Please can u send me a copy of both version 3 & 4 from ur computer.
I just downloaded the latest version and 24bit source audio is still not working, so I will continue to use TmpgEnc 3 as this works fine with 24bit source audio
Unfortunately, the help file cannot be opened with old versions of Acrobat reader. Please install the latest version.
Thank you for your understanding.
I have also a problem with not being able to access the helpfile. This is an Internet Explorer script error in Line 81(char 8) Code: 0 and the URL is: "mk:@MSITStore:C:\Program%20Files\Pegasys%20Inc\TMPGEnc%204.0%20XPress\HELP\TMPGEnc4XPress.en.chm::/00000.html". All I see is an empty chm TMPGEnc XPress Help window.
Yep, I didn't have Adobe Reader at all. I prefer to use Foxit Reader which is a full PDF reader in 1.5MB of code, none of this Adobe bloatware.
Unfortunately it looks like your application is BROKEN on my PC. Pity you don't state that Adobe Reader is a SYSTEM REQUIREMENT in the specifications for running it.