TMPGEnc 2.5 (Free or plus version) BBS

Jump to forum:

This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.


TMPGEnc 2.5 (Free or plus version) BBS [ Sorted by thread creation date ] << < Prev.   [ 12 / 681 ]   Next > >>
Classify Title User name Reply Last update
Question audio problems Larry 0 2006-08-03 06:39:50
Request updates Mike 0 2006-07-22 01:30:23
Question save the progress lucas 0 2006-07-21 20:58:21
Question Converting a 700mb AVI to svcd,the output file is going to be almost 3gig!!! Wato_pop 1 2006-07-26 00:24:13
Question WMV decoding with TMPGEnc. spcmnk 0 2006-07-11 13:59:08
Question Can't install TMPGEnc 2.5 Plus...get error cjspangler 0 2006-07-11 02:00:51
Question running command line aero 0 2006-06-09 04:50:41
Question Problem getting MVBR encoding to work as intended Jerico 0 2006-06-06 18:06:57
Question Mr Max_it 0 2006-05-19 23:17:28
Question Problems with Multiplex Tez 1 2006-10-09 04:08:34
Question watermarking tester 0 2006-05-18 17:36:52
Question Reducing TMPGEnc's CPU usage Milesy 2 2006-09-30 13:14:17

TMPGEnc 2.5 (Free or plus version) BBS [ Sorted by thread creation date ] << < Prev.   [ 12 / 681 ]   Next > >>
Question - audio problems No.43622
Larry  2006-08-03 06:39:50 ( ID:ivuhe5vxtrk )   [ Delete / Reply with quotation ]

hello all ive been useing tmpgenc 2.5 plus for a wile now and i just recently have been haveing a audio problem were all you hear is a tick noise on any video you put in the conveter i haver messed around with the settings to see if i can fix it but it did not help so if ANYONE has ANY info concerning my problem much abliged if you could share it with me. tmpgenc 2.5 plus is the best video converter i have ever used or seen and i would hate to have to use another video converter that is not tmpgenc 2.5 plus so plez anyone asist me



Request - updates No.43621
Mike  2006-07-22 01:30:23 ( ID:bagcgt9yn4k )   [ Delete / Reply with quotation ]

Will TMPGEnc 2.5 ever be updated to High Definition encoding? It's been almost 2 years all ready.



Question - save the progress No.43620
lucas  2006-07-21 20:58:21 ( ID:8u1/iaqret2 )   [ Delete / Reply with quotation ]

sory about my inglish becouse im brazilian
a would like to know if a can save my progress and start it later

could u send the answer for my mail?
thaks
lucas



Question - Converting a 700mb AVI to svcd,the output file is going to be almost 3gig!!! No.43618
Wato_pop  2006-07-19 22:20:08 ( ID:njzooxt4t6. )   [ Delete / Reply with quotation ]

Hi All

I had to reinstall TMPGenc after a format anf everytime I try to convert a avi file to svcd the out put file is almost 3gig were as before it was converting to about 1.2 gig,

Thanks in advance for any help


kimmy  2006-07-26 00:24:13 ( ID:it4gbtrnyla )   [ Delete / Reply with quotation ]

Hey,
well, i had the same problem. you gotta go in setting> advanced > source range( click twice) > then, you edit ur files like you want :P



Question - WMV decoding with TMPGEnc. No.43617
spcmnk  2006-07-11 13:59:08 ( ID:ijvzgenkcuw )   [ Delete / Reply with quotation ]

hello everybody. i did a "great codec update" (one of those huge packages of 40 MB) same days ago... after that TMPG did not decode WMV files any more - before it worked perfectly. Well, i uninstalled that package and reinstalled all the codecs i had on my system before (hope so at least). I read all the other questions about wmv. I have installed WMV Codec 9 (the file is running on WMP) and Direct Show is set to a high prio... so what's wrong here? What codec do i need to convert WMV in TMPG - or where can i load th VFAPI Plugin? Thanx fpr response. spcmnk



Question - Can't install TMPGEnc 2.5 Plus...get error No.43616
cjspangler  2006-07-11 02:00:51 ( ID:lxtzluj4qln )   [ Delete / Reply with quotation ]

I successfully installed TMPGEnc 2.5 Plus and DVD Author 2.0 on my laptop, but I want to installed TMPGEnc 2.5 Plus on my desktop computer at home, so I can de-interlace some videos while I'm away.

The desktop used to have the free version on it. I tried to use Windows XP's "add/remove programs" uninstaller to remove it, but it didn't work...it flashed a window really quickly but then didn't do anything else, and TMPGEnc remained on the list of installed programs. I deleted all the files and removed the registry entries by hand.

When I try to install 2.5 Plus, the version I paid for, I get an error that says: Error 1714: the older version of TMPGEnc Plus 2.5 cannot be removed. Contact your technical support group.

So how do I fix this?

--Chris



Question - running command line No.43615
aero  2006-06-09 04:50:41 ( ID:rgcxccfycdn )   [ Delete / Reply with quotation ]

Hello...
i want to use TMPGEnc-2.524.63.181...runinng it thru command line not thru GUI...can u please give me the command line for multiplex mp3+mpg



Question - Problem getting MVBR encoding to work as intended No.43614
Jerico  2006-06-06 18:06:57 ( ID:wvawrvupmu. )   [ Delete / Reply with quotation ]

Hi, I'm having some trouble getting TmpgEnc to encode MPEG-1 files properly with the MVBR setting. I have read several detailed descriptions about the program settings which tell me that with MVBR selected, you can go to the "GOP Structure" tab and use the "Force Picture Type Setting" to set different bitrates for various scenes in the movie. In my particular video that I want to encode, there are several high-speed shots, a few dark shot with a lot of flashing lights, a few moving camera shots, and the rest of the shots are just straight forward normal ones. Obviously, I'd like to encode the flashy, fast moving ones at a higher bitrate, and have the standard shots encode at a lower bitrate. Now, I've marked all the frames at the beginning of the segments that I want encoded at different bitrates. And I have assigned a specific bitrate to each segment. I clicked OK to close that window and made sure that the "Detect Scene Change" box is unchecked.

I then opened the MVBR settings under the Video/Rate Control Mode section. I have filled in the minimum and maximum bitrate settings to cover both the highest and lowest settings according to what I used on the "Force Picture Type Settings" frames.

However, no matter what bitrate settings I assign, there is always a lot of block noise and ugly blurring in the MPEG-1 encoded video. For example, if I set one segment of video to encode at 1150kbps and the next segment to encode at 2500kbps, then the 2500kbps shot looks chunky and ugly upon playback. In fact, it looks no different than the 1150kbps segment. Yet, if I encode the entire video at a CBR of 2500kbps, then it runs smoothly with no problems.

It seems as if TmpgEnc is not changing the bitrate when I have asked it to. Either that, or some other setting is over-riding it from working properly. Anybody got any clues about what could be wrong here and have any advice on how to get it working? Thanks!



Question - Mr No.43613
Max_it  2006-05-19 23:17:28 ( ID:dmhfvywhwdn )   [ Delete / Reply with quotation ]

Hi,
I've a dv video 16:9 format, pal. Then I look at the original dv video full size on my pc, the image occupies the entire width of the screen.
After the conversion, if I look at the mpeg video, full screen, the video lacks some pixels at the left / right border. But if I look at file properties, the width of mpeg is 720pixels, so it seems like the dimensions of the pixels was "reduced".
At this moment I haven't look at this video on a tv.
Why this strange behaivour?
Thanks.



Question - Problems with Multiplex No.43611
Tez  2006-05-19 12:25:05 ( ID:27akdam0zuw )   [ Delete / Reply with quotation ]

hi!

my problem is:

i used my vob file with de-multiplex to get an m2v and and ac3 file and want to multiplex them to mpg! but i can add them in the "multiplex" window... i choose the files but the windows remains clear.. please help me!


John  2006-10-09 04:08:34 ( ID:noiu8netvmk )   [ Delete / Reply with quotation ]

You must convert your ac3 audio file to a MP2 file.
You can convert the ac3 file to a MP2 file using dBpowerAMP Music Converter.
You can find the latest version of dBpowerAMP Music Converter for free at:
http://www.dbpoweramp.com/bin/dMC-r11.5.exe

-----------------------------------------------------------------------

To convert the ac3 file to a MP2 file:

1.) Open dBpowerAMP Music Converter
2.) Open your ac3 file3.) Choose Mp2
4.) Select Frequency 4800 and Bitrate 384kbps and click on "Convert"

-----------------------------------------------------------------------

To multiplex the video and audio together into a MPG file:

1.) Open TMPGEnc Plus
2.) Click on "File" and choose "MPEG Tools"
3.) Choose "MPEG-2 Program VBR" and brouse for your video input (M2V) and your audio input (MP2)
4.) Click on "Run" and it will multiplex the two files into one DVD compliant MPG file

I hope that is of help to you



Question - watermarking No.43610
tester  Home )  2006-05-18 17:36:52 ( ID:zvrbpw8uql6 )   [ Delete / Reply with quotation ]

I am trying to add a watermark to a video using the shareware version 2.5. I am new to this and have no idea where to start or if it is even at all possible. Any help would be greatly appreciated.

cheers



Question - Reducing TMPGEnc's CPU usage No.43607
Milesy  2006-05-18 09:35:54 ( ID:rqnccfglf1r )   [ Delete / Reply with quotation ]

My CPU temp is going upto 97oC when using TMPGEnc, and eventually causes
the machine to shut off.

Is there anyway to reduce how much of the CPU it uses?


martin81d  2006-09-23 12:15:50 ( ID:qzsu1qop8tk )   [ Delete / Reply with quotation ]

Milesy, I had a similar problem. The simple fact is there's no way to reduce the CPU usage that TMPGEnc needs. The only solution is to buy a better processor. As fot the shutting down problem, it's probably because your CPU is clogged up with dust and the fan is not able to cool it properly. Once it goes above the maximum operational temperature it will shut off. Open up your PC, take the fan off the CPU unit (it should just click off and on) and clean really well inside it. You should have no more shutting down problems after that. I didn't.


Hbasm  2006-09-30 13:14:17 ( ID:5ut7iozhcnl )   [ Delete / Reply with quotation ]

You shouldn't click the CPU heatsink back on without some arctic silver.

Better yet, don't remove the heatsink at all, only clean the fan.

Or add a case-fan...

There are many ways to cool it down.



TMPGEnc 2.5 (Free or plus version) BBS [ Sorted by thread creation date ] << < Prev.   [ 12 / 681 ]   Next > >>

View article | Back to TMPGEnc Home | Administrator TMPGEnc Net

Script written by TMPGEnc.