I downladed the trial version and installed on my comp.
however the result of my tries is that there is only audio but no video in the outputfile.

The readme does not say anything about additional software. Still do i need to install another software? Or what did i wrong

Ben

First make sure that you have the Correct Codecs installed, and go to "Options" to "Enviromental Settings" to "Vfapi Plugins" and Raise the "direct Show" to "2"..This should get an image in the File, You will know if there is going to be a Picture if you can see a Picture in the Tmpgenc window while encodeing...

Please add *.wmv in "Compressed video source" file types.

This extension is used by the new Windows Media Video files.

Thanks!

Note: it is possible to use those input files, but right now I have to select "all files (*.*)" in order to be able to load them...

They Are Supported, If they were not Supported you would not be able to Encode them, I don"t think it is To much trouble to Change the File types to "All Files" to load the WMV files...Do you??

I tried to cut a small section of a mpg file (vcd and svcd). However the Audio only last 3.19 minutes and stopped. While the video goes fine.
If that section is under 3.19 minutes, it goes fine.
Please help.
Thanks

Use a different Editor As the One in Tmpgenc Doesn"t Seem to be the very Good,

Sorry! I forgot to mention I am using tempgenc 2.512.52.161 Free download version.
Again, please help!!
thanks

I tried to cut a small section of a mpg file (vcd and svcd). However the Audio only last 3.19 minutes and stopped. While the video goes fine.
If that section is under 3.19 minutes, it goes fine.
Please help.
Thanks

HI,

Is there a limit on the lenght of mpeg movie you want to cut??
I try to cut the first 5 minutes and the last 10 minutes of a 1 hour video to get a clean mpeg, but everytime i end up with 35 minutes.
Any1 knows a workaround or is this beacuse of the MPEG licensing stuff??

cheers,

rork

This is Just because the "Mpeg Tools" Just aren"t really the Best to use...There are Other Freeware Mpeg editors that can be used that will give you better results, Like "Chopper XP" and "Mpeg2Cut"...

hi,
tmpgenc crashes if the tools->cut function is used to split a file in two parts.
example:
cut1: from 00:00,00 to 42:00,00 -> OK
cut2: from 42:00,00 to (Last) -> Crash

Is it possible to use TMPGENC with other MPEG2 decoders besides those mentioned in the faq. I'm looking for a free one to use so I can re-encode MPEG2 video at different res.

The Absolute Best way to Encode a Mpeg2 file to whatever in Tmpgenc is to Use "DVD2AVI" to decode and Frameserve to Tmpgenc, this is the Fastest way and will Probably produce the best Quality decodeing...But the Ligos Decoder Is a Free decoder, if you look on Google you should be able to Find it But DVD2AVI is still your Best bet...

Ok, I've RTFF. I've looked for, and didn't find, the AngelPotion codec on my hard drive. I've downloaded and tried countless templates. I've changed DirectShow to Priority 2. I've enabled the "Output YUV data as Basic YCbCr not CCIR601" option in the "Quantize Matrix" tab in Settings. Still those horrible, cyclic, pink/purple mosaics appear when converting to MPEG. I'm at my wit's end. Please, please, please, does anyone have any other ideas? I'd love to use TMPGEnc, but I've spent the last four days on this, and it's rapidly becoming not worth the frustration anymore. Unfortunately, I also can't find any other good conversion programs.

Many, many MANY thanks, just for looking at (and thinking about) this post.

Well the Angel Potion Codec will Not say "Angel Potion" it will Be Labeled something like "APMpeg4v3.dll" in you Device manager under "Video codecs"...If you are encodeing a DivX or XviD file you Should maybe use the "FFDShow decoder" instead of the Divx or XviD codecs to decode the File..This is about all I can think of...

Ack. Been up way too long with no sleep. The codec was there, but I missed it the first time through. In any event, simply uninstalling it didn't work, as the foul thing replicates itself as temp files and then reinstalls. I actually had to go into the registry and delete the Keys by hand (which really makes me realize what a hack this thing is...more like a worm than a codec).

Anyway, I now have nice, crisp files. Thanks to all you regular users who reply to others' posts...you are all helping far more lurkers than you realize.

I have been trying to get Ulead MF to accept my TMPGnec MPEG2 clips, but it will not accept any audio. Ulead keeps telling me its an incorrect audio stream or something to that effect. I have tried ES audio/video and System audio/video and neither are accepted by Ulead MF. MPEG1,2 and PCI have also been tried. What is the common parameters for TMPGnec when converting for Ulead with sound? I really like DVDlab, but that program definetly wants you to do your own sound seperately. Is there a simple guide on how to encode your sound seperately, then merge it with your video? I am using TMPGnec instead of having Ulead MF to do my compessing.

Below is the reason im using TMPGnec. But the guide does not say much on what audio to use.

Taken from Guide:


Convert your videoclips to standard DVD MPEG using TMPGEnc or some other good DVD Encoder. You could let Ulead DVD Moviefactory convert your video to DVD MPEG, but it is a bit slow at encoding and the video quality may not be as good as other encoders.


Thanks,
Dominic

Well DVD Compliant Audio is "Wav/PCM ,Ac3(Dolby Digital) and Mpeg1 Layer 2, and the Audio frequency for all these Formats has to be 48000hz, But For some reason I thing the DVD Movie Factory only accepts Mpeg1 Layer 2 audio, and Tmpgenc will only Give you either Wav/PCM audio or Mpeg audio...

I use the Ulead DVD Movie Factory 2 and have no problems at all. It even accepted the ac3 audio file.

I've encoded an AVI video for VCD. It comes out great, and plays well on computers, but when playing on a stand-alone player it has problems.

The movie starts with a black screen and has black screens here and there for transitions. Playback really gets goofy when the opening fades in from black for a couple of seconds, then fades out again. On playback it's suddenly there, then gone, then it "freezes" again till motion kicks in again. It seems as if the player wants to treat these black frames (or even those with little or no motion) as non-exsistent. Upon playing, once the video contains motion etc... the player tries to catch up, but by that time there's no audio and it's all out of whack.

Is this a problem with the player, or can I encode the video in a way that will tell the player to process those frames? Can forcing frame types do the trick? The player does a great job running MPEGs, it just seems to not like "empty" frames.

Any advice is appreciated!
Chris

Actually what it sounds like to me is you are Suffering from Bitrate Spikes, when you get Bitrate spikes it seems like the Video cuts in and Out and/Or Plays slowly with the audio Playing at regular speed, if this sound like your Problem let me know...

After a little digging I found these threads which sound quite similar to what I'm experiencing.

http://bbs.pegasys-inc.com/bbscgi/search/docs/en/tmpgenc/box54/tmpgenc_post_20816.html

http://bbs.pegasys-inc.com/bbscgi/search/docs/en/tmpgenc/box45/tmpgenc_post_17970.html

There are problems with parts of the video that don't seem like they should have a dramatic change in rate. It also seems to want to stop in darker scenes of the video as well. The audio never gets going on playback as it comes in after the video (and the problems) start.

So you believe it could be caused by a spike in the bitrate? I guess I've got to look at that. If I do find this to be the case, what suggestions would you have for smoothing things out?

Thanks!
Chris

I should do more homework before posting. :\nI guess tightening up the min/max bitrate settings could help avoid large swings, eh?

I'm really enjoying TMPGEnc to encode lots of svcd's with standalone DVD player.

Now I'd like to combine standard svcd mpeg-2 video and non-standard ac3 audio to mux as standard svcd since standard svcd format allows mpeg-2 video(480x480/576) and mpeg-1 layer 2 audio(stereo only!).

Normal dvd player supports ac3 decoding or transporting to decoder.

Any idea to do make this happen?
When I simply think that dvd plays ac3 audio, if there is any way to present ac3 audio to dvd player to accept and play, it'll be great.

Thanks in advance...

Kisoo

UMmm..The chances of your DVD Player being able to Play SVCD"s with AC3 audio are Very Very Very Low, and if the AC3 is Surround sound the Chances are even smaller..Once the DVD Player sees that it is a CD-r being Loaded into it and not a DVD it will disable the AC3 decoder and enable the Mpeg audio decoder because there is no Video standard on CD-r that supports AC3, And even after you manage to Mux the AC3 to the SVCD Video file you will have a Really hard Time Finding a Program that will Burn it to Disk..But if you want to Try well then you can use "BBMpeg" or "Mpeg2Vcr 3.14" to mux the AC3 to the SVCD Video file...I have had Minimal success with SVCD"s with AC3 audio But I did a Lot of research before Buying my DVD Player and My dvd Player is One of the Very Few that will Play SVCD"s with AC3 audio but Only on some Brands of CD-RW not Regular CD=r"s, and there is No way to add Chapters or any Special features to the DVD Cuz the Only Program I could find that would bun these Files to Disk was Nero with the Compatibility Disabled...well Good Luck

Thanks a lot.
I understand that there is a chance to mux svcd with ac3. You didn't mention that you succeeded svcd with ac3 5.1 channels. Did you make it?
I have nero and panasonic 533k dvdplayer. Which model you have? Thanks again.

Regards,

Kisoo Lim

Well I could not Get Dolby 5.1 to play only AC3 Sterio audio and it would only work on CD-RW"s not CD-R"s, with Dolby 5.1 the Audio file size is extremely Large especially if you are putting it on a CD-r so you might only be able to get 25 minutes on a CD-RW cut the 5.1 audio file is so Big..The Generic DVD Players are the Best if you want to Play Non-Standard VCD/SVCD"s, Brands like "ApeX" will Handle Higher Bitrates and More Formats as opposed to Sony or Panasonic ..My Player is Made by a Company Called "ElectroHome" and it Plays Pretty much everything...

I am doing my first steps with creating a DVD copy. First I ripped everything correctly with the Smart Ripper, but the created file is to big (over 5 GB). I just want to use TMPGENC to reduce the file size. By trying to open my file I am always getting the message File "..." can not open, or unsupported.

Can anybody help me?

Since mv2 file is a type of avi, then there must be no problem. Try to raise the level of directdraw in the environment setting.

NO It isn"t, A m2v file is a Mpeg Video file Not an AVI file, The Correct way to Encode Vob/M2V files off of a DVD is To first Use "DVD2AVI" to make a D2v Project File for frameserveing then Load the D2V file into Tmpgenc and encode it to DVD Specs, This method os Better that Just loading the M2V file into Tmpgenc Because Tmpgenc needs Specific Mpeg2 decoders Installed on the Computer to Decode the M2V file and thos Decoders aren"t As good or as Fast as useing DVD2AVI to do the decodeing and Frameseve the file to Tmpgenc..There are Guides on useing this Method to Back up DVD"s at "http://www.dvdrhelp.com/"..