Tmpgenc 2.59 can use an external audio engine. Why should anyone use this facility? Do we get a better sound quality? Which external sound engine has best sound quality? I convert DVD-Video to VideoCD. Can an MP3 encoder be used? Any downsides?

TMPGENC MPEG-1 L2 audio encoder is only "fair". TOOLAME 0.2i
is claimed to be the best, and is designed as a plug in.
See www.vcphelp.com tools section...

It actually is better, and I use it.

Cheers,
Gern

thats www.vcdhelp.com

SCMPX is a really good aone also cuz it has a Sample rate converter which Toolame doesn"t...

No I don"t think you can use Mp3..

After Download your Free Licens Version 2.59 i´m not able to create DVD - Mpeg2 because it says, Expiration date of Mpeg2 is expired.
I just want to test - how can I overcome this problem??
Thanks in advance

Yep, easy.
$48.00

This happens cuz in the past you have tmpgenc installed..You can only install one demo and that is it..After you install a demo and 30 days goes by you can not install a Demo ever again unless you Buy Tmpgenc Plus...

Thanks for this information, but if it is true, that I have installed a demo version before, it must be ages ago - for I can´t remember.

By the way , all Magazines in Germany (PC Direct / Videofilmen/ Camgaroo/ etc.) refere to the Shareware from Tempgen that privat persons can use for free and without any expiration date. This is than absolut missleading and not correct.

Well you can use the Mpeg1/VCD features Forever so in a sence it is Freeware Cuz the Mpeg1/vcd function is Freeware But the Mpeg2 function runs out...

I've created a 1gb mpeg using the matrox remote (G400 & RR-G) and wish to take out the adverts between each episode (two episodes within the 1gb file I captured).
Not having any other editing software I tried the mpeg tools facility in TMPGEnc.
I loaded the file, and sourced the first half of the first episode, I then loaded the same 1gb file again and sourced the second half (of the first episode). I did this again for the first and second half of the second episode (I therefore had loaded the same 1gb file four times and sourced different parts of it) and hit 'run'.
Everytime I tried this, even though the first clip is ten minutes it only created a 120 sec clip.
I loaded the 1gb file again and this time only sourced the first ten minutes - still it only created a 120 second clip.
Am I doing something wrong?
I was beginning to think the mpeg tools facility in TMPGEnc wasn't designed for this, but as I tried it again only sourcing *one* clip, think I must be doing something wrong.
I've successfully used this program to cut mpegs in the past.
Any idea's are greatly appreciated.
Will
--
One thing I forgot to mention - I also copied the 1gb file a further three times so I could import four different clips into TMPGenc tools and source different ranges from each one - still the same output of 120secs.
...
Windows 98se
Abit KT7A motherboard with VIA KT133A /VIA 686B (4-1 version driver 4.43v)
AMD Duron 800
Matrox 32mb G400 Dual Head (682.016 display package)
Matrox Rainbow Runner G Series Capture Card (628 display driver and vt155e video tools)
Primary IDE Master: IBM Deskstar 40GB GXP
Secondary IDE Master: Lite-On 16102b (x16x10x40) CDRW Drive
Secondary IDE Slave: Toshiba 105 DVD-Rom Drive
512mb SDRam PC100 Memory
SB Live 1024 Soundcard (driver 4.06.656)
ADSL EA900 USB Modem

The Mpeg tools only support Mpeg files encoded by Tmpgenc, and even then they don"t work all the time...You are much better off useing a real Mpeg editor, I have been useing Cyberlink Power Director 2.5 lately and it has been working flawlessly for editing Mpeg files..But Womble Mpeg2Vcr is good also accept it seems to add a lot of Padding to the file But it can be removed .....You will get better Quality if you captured to AVI and use the "Cut Editing" feature in the "Source Range" to edit out any part you want to edit....

Hi.
Thanks for the message.
I am familar with the source range facility, but have a query concerning this:
I was under the impression you couldn't source more than one range, for instance I know you can source 200 to 400 of a 1000 frame clip, but what I want to do is source 200 to 400 *and* 600 to 800 at the same time.
Is this possible?
Many thanks,
Will

> The Mpeg tools only support Mpeg files encoded by Tmpgenc

Ah-ha!
I didn't know this!
Now I think about it I didn't actually create an avi. (with the Matrox card) and then encode with TMPGEnc, I captured real time to mpeg1 using an ATI Radeon, perhaps that's why it didn't work as I never ran it through TMPGEnc in the first place.
Can I encode the whole clip using TMPGEnc, and if so, will I lose quality?
Will try source the programs you mentioned, are they available as a demo?
Thanks,
Will

I use adobe premiere to edit my DV avi files. I hear mainconcept's DV codec has better quality than ms DV coded. But I don't think mainconcept's DV codec will help to improve image quality if I output to TMPGenc via frame server(vedioserverpackage 095 from vediotool.net). It only improve if I output in DV avi format. Am I right?

What are the feature differences between the freeware 2.59 and the purchase versiosn 2.5 Plus?

Well the freeware Version isn"t really Freeware, the Mpeg2 encodeing Runs out in 30 days were the Registered "Plus" version Doesn"t run out..The Plus version has a Few more features Like a Better 2 pass setting and Higher resolution settings..And once the "Demo" version Runs out you can never install a demo version again..But if you are just doing Mpeg1 encodeing then there is no real need to Get the Buy "Plus" version Cuz the Mpeg1 encodeing in the Demo doesn"t run out...

I have error 'Could not open this file with DirectShow.(0x800700E)' when I try to cut my mpeg file. I've reinstalled Windows media Plaer and DerectX8 and still no good. What is missing?

I have a mpg that I have converted from an avi. It's perfect when I play it on my computer, but my TV adjusts the picture to full screen when played in a dvd player. Why is this? Can I have it play widescreen on my TV as it does on my computer?

Thanks

why after ripping a dvd movie using the following programs is my audio out of sync. with the rest of the movie..i.e my audio track lasts for about 20 secs. longer than the movie?? (this happens when i view the mpeg movie on my pc.after encoding using tmpg enc 2.5)
programs used : smart ripper
dvd2avi
tmpg enc.

Well if you ripped the VOB"s properly and used all the other software properly then there shouldn"t be a problem...I have never had a problem like this and I do a half a Dozzen DVD rips a week and I have never had a sync problem like this..

I had it once doing SW Episode One and never understood why it happened.
May have been a hdd glitch during conversion, who knows? :o)
I haven't hada problem before or since, touch wood ;o)
What is your system spec, have you a relatively low processor speed?
Will
--
e-mail me (UK) to trade dvd rips
...
Windows 98se
Abit KT7A motherboard with VIA KT133A /VIA 686B (4-1 version driver 4.43v)
AMD Duron 800
Matrox 32mb G400 Dual Head (682.016 display package)
Matrox Rainbow Runner G Series Capture Card (628 display driver and vt155e video tools)
Primary IDE Master: IBM Deskstar 40GB GXP
Secondary IDE Master: Lite-On 16102b (x16x10x40) CDRW Drive
Secondary IDE Slave: Toshiba 105 DVD-Rom Drive
512mb SDRam PC100 Memory
SB Live 1024 Soundcard (driver 4.06.656)
ADSL EA900 USB Modem

I convert a divx to SVCD format and want to get less Minutes on a CD-R with Lower Bitrate than "1600" ,but it seems to be locked, how can i solve it?
Thanks(TMPGEnc 2.59.47.155)

hi,

I currently have tmpgenc 2.54 and was thinking about upgrading it to a newer version but i see so many bug reports for the newer version of tmpg (i.e. 2.58, 2.59). Can anyone tell me which version is the most stable from 2.54 through 2.59? Should I even bother upgrading? I just want to encode some of my various video files (mpegs and avi's mostly) to vcd to play on my dvd player so I want a version that won't have bugs or mess up the encoding but still have good quality. Thanks for the help.

PS does anyone know where to get older versions of tmpgenc than the newest update that's available on this site? Thanks again.

If you are happy with the one you got then stick with it ..Or you can try a newer version and Keep the older version also...There are a Few new features in the newer version that are handy like encodeing sequential AVI files..

Hello all. I have a problem using TMPGEnc 2.58/2.59. I used 2.58 without any problems, but now whenever I try to encode an avi, the mpeg starts fine, but then the sound cuts out. It has done this on several avi's. I even extracted the audio using VirtuaDub and even with another program, AVI2WAV. I have listened to the wav and it is complete. There is something in the TMPGEnc encoding process that is losing the audio. When I use version 2.55, it works fine, but the video is of lesser quality than the ones made using later versions. Any ideas?

Try useing a seperate Audio encoder to encode the audio to Mpeg audio..Like Headac3he...

I thought that Headac3he would only work for ac3 streams. Plus I have used a different program than VirtuaDub. Even then, the wav played fine in RealPlayer, but somehow did not convert the audio to the mpeg. How would I extract and convert with Headac3he?

You don"t extract with "Headac3he" ,you Just encode to Mpeg audio with headac3he...So you extraxt the audio to Wav with Virtual dub then load the Wav file into Headac3he and encode it to mpeg audio then you Mux it with the Mpeg Video you get from tmpgenc....There are external Audio encoders that can be used In Tmpgenc..The 2 good ones are "toolame and SCMPX" you install them in Tmpgenc by going to "options" to "enviromenatl settings" to "External tools" then navagate to the Encoder plugin...You can find these Encodec plugins on any search engine like Google..

I've had the same problem, but when i used VirtualDub to extract the sound file (as *.wav) from the avi-file, it worked perfect !
Select in TMPGEnc as video file the *.avi file and as audio file the *.wav that you've extracted from the movie.

When I convert an MOV file to VCD I cant get any audio to convert over..Any suggestions?

Maybe You can try to save the audia as a separate WAV file. then you use audio source to put this audio in the mpg file

I converted a divx file into mpg
Nero shows an error sying Stream encoding is invalid for (super)vcd.
Have I converted in wrong way or how do I solve this problem?