Hi,
Whenever I try to load a Divx file into Tmpg 2.58 it now says .avi can not open or unsupported, It used to work last week, I think win media player has upgraded and spoilt Tmpgenc, Wondering if anyone can Help me Please.
Jon.

Options-enviromental Settings-Vfapi Plugins and raise the "direct show" to -2...

When I try to encode a movie, on the set start and end page, everything looks ok. I have the begining and ending credits. But when the encoding is over, the end of the movie is gone. I go from a 1hr 47 min film to 56 minutes. What am I doing wrong?

Hi all,

Ive been using tmpegenc for a long time now with no problems at all apart from running into known bugs.
After upgrading my machine recently my machine now hangs after between 6 and 12 minutes of encoding. There is no crash restart, no system log entry, no error messages of any kind, just a complete lock up of the machine. It doesnt matter what format im trying to encode, tho im actually trying for a 2 pass svcd from ripped vobs.

My new machine spec is athlonxp2200+ on an abit at7 max2, 512 of crucial 2700, leadtek ti4400, sblive 5.1 platinum, dual WD800JB 80gb special edition raid0 etc etc running XP pro SP1. The only thing different to my previous and working setup is the cpu, memory and mobo.

Ive tried underclocking the cpu and ram, disabling all the onboard USBs/firewire etc, reinstall of the software, reinstall of all codecs with no luck at all.
I consider myself an expert with tmpeg and with video work in general, as well as being a certified support tech for a living but this one has me totally stumped. My assumption at the moment is some incompatibility with thoroughbred athlons as i know tmpeg has no problems with the at7 max2 due to a friend having a similar setup but only running an xp1900.

Has anyone seen anything similar or does the tmpeg team recognise a bug with tbreds?

Any help would be greatly appreciated, pulling my hair out here.

Cheers

Try unchecking "SSE" at CPU setting of TMPGEnc. This might help.

I personally think Win2K is more stable than WinXP statistically though.

I tried unchecking sse, increased the time before crash to 15 mins or so but still the same outcome.
Ive sorted the problem out now, sort of. If i set my bios to xp2000+ rather than xp2200+ or by manually setting fsb and multiplier then it works.
This leads me to think that its down to the CPU ID string as if i set the same fsb/multiplier (12.5x133) that the xp2000+ setting uses i get the same crash.

If anyone is reading running a 2200 or any other tbred can you try an encode and post your results.

This crash only occurs using tmpegenc btw, using bbmpeg, cce or any other encoder has no problems.

When I upgraded to a machine similar to yours (Athon 2000+ w/XP) my hang problems with TMPGEnc went away! But, on my old machine, any program rendering MPEG files would hang my system flat after about 10-15 minutes of encoding. Drove me nuts for months. Finally fixed it -- accidentally -- by reverting my swap file settings to Windows default (changing setting back from fixed size to dynamic). Swap file had been too small to handle MPEG conversion.

XP creates a fixed-size swap file by default, I think, but it may not be big enough for your jobs. Try increasing its size and see if that helps.

i got the same problem on
windows 2000 Pro. / Service Pack 3
Athlon XP1800+
did all possible patches and upgrades but nothing would help?
this seems to be an processor related problem ???

mei

If i lower the bitrate from 1150 to 900 to obtain a final estimated 760000 ko mpg file which i can burn on a 90 min. 800mb cd-r, i still get a 932950ko file.
It seams that change the bitrate doesn't change anything on the mpg file size.

If you are creating Non-Standard VCD, you have to use Non-Standard VCD for Multiplexing. If not, TMPGEnc fills the "missing" Datarate with Zero-Bytes.

You need to change the stream type when encoding to 'MPEG1 VCD (Non standard)' otherwise the file will be padded.

Just run that file through the multiplexer with the stream setting above to remove the padding. This will reduce the file size accordingly.

ASHY

I went into enviromental setting and vfapi plug in and I saw direct show multimeadia reader it has a setting of -1 and i can't change it also earlier today or tonight i encoded eddie murphy delerios it took 2 hours and played the entire process on the preview screen now i am tring to encode oleander it it took about 1/2 hour and preview screen did not work so i am not sure if it encoded it at all

Highlight the setting then right click it. A menu will pop up.

If you see nothing in the preview then nothing will be encoded, raising the priority to 2 should solve the problem.

ASHY

while trying to encode, i hit the start button, and i get the message " can't load p3package.dll". how can i fix this; already reinstalled and downloaded again.

If you downloaded this as a zip file, Try re-extracting it to it own Folder. I ran into the same problem and so I created a new folder and extracted the zipped file (The TMPGE...package) to it, which contained the seemingly missing P3*dll . When I ran the package from this new folder it was able to find the *dll file.

If you downloaded this as a zip file, Try re-extracting it to it own Folder. I ran into the same problem and so I created a new folder and extracted the zipped file (The TMPGE...package) to it, which contained the seemingly missing P3*dll . When I ran the package from this new folder it was able to find the *dll file.

I am using Plus 2.5 version. I get this error when trying to encode to VCD,"Read error occurred at address 0049EA94 of module TMPGEnc.exe with 00000037. It gives me the error at about 1 hour elapsed time. I am using Windows XP. Is there a way of getting the earlier versions of TMPGEnc? I started having the problems when I upgraded to 2.58 and Plus 2.5 versions. I would greatly appreciate any help.

Go to the VFAPI plugins and raise the direct show to '2'

ASHY

I did that. I even tried it at 3 and I still get the error. Please keep helping me. I greatly appreciate it.

Frameserve the file from Virtualdub to TMPG.

ASHY

I am not using Virtual Dub. I used CladDVD XP 1.3 to create a .d2v file for video and a .wav file for the audio. I load those 2 files in TMPGEnc browsers for video and audio. Then use System-Video+Audio to create a MPEG-1 file to copy on CD-R. Let me know if I should be doing something else. Thank you.

Well that is your problem,you should have said you were useing D2V files...You need to have "DVD2AVI" installed on your system or at least the "DVD2AVI.VFP Plugin...You will know if you have the "DVD2AVI.Vfp" plugin because it will be in the same list as the "direct show" in the "VFAPI Plugins"....seing as your D2V file was made by CladDVD I don"t know if the D2V file will work properly because you have to have the DVD2AVI plugin for that specific version of DVD2AVI and I don"t know what version of D2V file CladDVD Makes..So what you should do is download "DVD2AVI" open up the DVD2AVI folder and copy and paste the "DVD2AVI.VFP" folder into The Tmpgenc folder, then restart Tmpgenc and see if the "DVD2AVI.VFP Plugin is Listed in the Vfapi Plugins..if it is Try loading in the "D2V file but if it doesn"t work you will need to Use "DVD2AVI to make a Compatible D2V file, you can use it to extract the audio from the Vob files or you can use "Vob2Audio"....

Dis-regard that last Re-sponce I totally Mis-understood the Question...Gotta stop drinking Rubbing alcoholl....lol

If you are using a d2v file then there is no point in changing the priority of the dirtect show file reader as it wont have any effect. The setting you should be changing is the 'DVD2AVI project file reader'
I'm not saying this will work, but it's worth a try. It is more likely the d2v file is corrupt.

If you want my advice dump CladDVD and start doing it the best and the right way. Use Smartripper to rip your your movies and use the d2v file that it creates instead and VOB2AUDIO to rip the audio to a wav.

ASHY

I tried CladDVD with a new movie and made DVD2AVI in plugin a higher priority and I still get the Read Error. I downloaded Smart Ripper. When it was done ripping the info, it gave VOB files. None were .d2v and VOB2AUDIO files. When using Smart Ripper, how do I create those files? Thanks for all the help. We'll get it right soon.

You need version 2.41 of Smartripper. This one creates the .d2v file.
VOB2AUDIO is a program you use to rip the audio from the VOBS to a wav file.

ASHY

I used SmartRipper 2.41. It created 5 .VOB files and 1 .IFO file. How do I get SmartRipper to create the .d2v file?

Are you using the correct RIP method when you use Smartripper. You should be using 'Movie'.
The d2v is created when you rip the VOB files. Look in the same folder as the VOBS.
As a hint it is the one with a .d2v extension.

ASHY

Ashy, I clicked on Movie in SmartRipper. When done, it did create the .d2v file. I used VOB2AUDIO to create the .wav file. I loaded the 2 files in TMPGEnc. I did not get the usual error during encoding but when it finished, it said completed 100% but only encoded about 12 minutes of the movie. Now what? I like using CladDVD program because it is very simple and it gives the complete .d2v file and .wav file when done. Your way is an extra step using the VOB2AUDIO to get the .wav file. I am very baffled on why CladDVD used to work and now it sounds like it is screwing up the .d2v and .wav files. I tried an earlier version of Tmpgenc and I still get the read error so it must be the CladDVD program. Let's keep trying. Thanks for all the info.

This is my advice to you which will ensure that things work correctly. If these steps don't work then there must be something else at fault.

Step1. Completely delete TMPG then extract a fresh copy of the latest version to your drive.

Step2. Download DVD2AVI v1.77.3

Step3. Copy from the DVD2AVI folder the file called 'DVD2AVI.VFP' into the TMPG folder where the TMPGenc.exe is located.

Step4. Run TMPG and got to Option>enviromental setting>VFAPI plugins and change the priority of the 'DVD2AVI project reader' to 2 and the others to 0

Step5. Using DVD2AVI itself create a .d2v file (there's no need to create a wav with DVD2AVI so check 'none' under - Audio>Track number.

Step6. Load the d2v into TMPG without the wav and select ES(video only) as the stream type.
Now click File>Preview and move the slider all the way to right slowly to see if TMPG can read the whole of the movie.

Step7. If that part went ok you should now be able to encode the movie.

ASHY

P.S. uninstall CladDVD XP 1.3 to make sure there are no conflict problems.

ASHY

If I encode with Video Only, will the sound be there when done or do I have to load in the .wav file that VOB2AUDIO created and stream type: System(Video & Audio)?

Ashy, I am still waiting for reply. Thank you.

Yes load the wav from Vob2Audio and choose System(Video & Audio).

If you still have the same problem after following all the above steps then it
may be a problem with the VOBs themselves.

I once had a similar problem myself. Whereby the d2v was created from the VOBs no problem, but there would be an error at a certain point every time when encoding. When I re-ripped the VOBS with VSTRIP the problem went away.

ASHY

Ashy, what should the configurations be set at on DVD2AVI program to create the .d2v file. I want to make sure I am doing it right. Also, in Video, should the YUV->RGB setting be set to PC Scale or TV Scale? I want to watch the movie on my TV. I know how to create the .wav file using VOB2AUDIO, too. Thanks for all the help.

I down loaded 5.8 and opened it up i went to set it up and it ask me for a serial number so i put in serial # and it just opened up I don't think it loaded on to my computer i went to add/delete programs and it was't there so i thought it must of loaded why would i get the start page of the 5.8 so i loader a avi file and all i get is a black screen in the preview window but it acts as if it is encodeing a file what am i doing wrong respond otkidd13@aol.com

What do you mean it didn"t load onto your Computer???You couldn"t open it up and Enter your Serial number if it wasn"t on your computer...It probably won"t be in your programs list Cuz It can run as a Standalone application...The balck screen can probably be cured by going to "Options" to "Enviromental Settings" to "Vfapi Plugins" and Raise the "Direct Show File Reader" To "2"...

TMPG doesn't install. It runs as a standalone program. The other problem you are having can be solved by using Minions advice.

ASHY

I get this error "write error occurred at address 77F536F7 of module 'ntdll.dll' with 00000000" when i go to create i VCD can someone help me

answer back at rvis@unitz.ca
thanks a million

Hello friends,

I want to burn my video into 16:9 widescreen movie (my source is 16:9 too) but I don't know how to. When I go into Make dics Options - Compression, I see Media type list is blur, so I cannot select 16:9 as I want to burn.

If anyone knows, please help show or teach me what to do.
Thank you very much in advance.

Ferrymost,

If you are talking about "ulead DVD workshop" then you are in the wrong place but heres a Tip, you need to Make a Custom Profile to set it to 16:9...

Thanks for your kind reply but in fact because I don't see any so that I can set my profile 16:9. It's blur. Another forum also no reply.

Thuydinh,

Mpeg file flags determines whether the title is 16:9. Use TMPGEnc to encode (it is MUCH better) and set the aspect ratio in the Setting/Video sheet. Make sure DVD Workshop does not re-encode. There are some tools for fixing mpeg files on digital-digest.com.

Don't trim the beginning of the title in DVD Workshop because it will lose the 16:9 setting.

I author Leno Show music captured from a Hi-Def tuner and the result looks VERY close to the Hi-Def broadcast when played off the DVD. On a computer, it blows people away since they are used to ultralow def.

Does anyone know how to produce a .WAV file from a movie that uses the DTS audio format? thanks -Don

As of now there aren"t any Programs that will Decode a DTS File to WAV..There is a program that will Encode to DTS called "SureCode DTS" But I don"t think it will Decode to WAV...

Except Graphedit, which I think is to complicated for a beginner to use.

ASHY

well...I just wanted the .WAV...I didn't care about if it came from DTS or the AC3 format... I just wanted a .WAV, but you guys solved that...in the previous posts.
-Don

Ashy, I posted a while back that I couldn't get the audio out of "castaway". You told me I was decoding the wrong track and gave me lengthy instructions on how to do it correctly...I am grateful, but they did NOT work.
You also recommended using VOB2Auido...I'd like to...but it doesn't produce the .D2V file TmpgEnc wants...
Can I use DVD2AVI to make the .D2V (project?) file and VOB2Audio to make the .WAV? Will mixing it up like that work?
still confused -- Don

OK...If you ripped the VOB files with "SmartRipper" there will be a ".TXT" file in the Folder with your Vob files in that text file there will be a List of audio and video tracks that are in the Vob files...The first audio track on the list will be track "One"..Look for the first audio track that is "English" and "AC3" not "DTS" then extract the audio track that corresponds with that Number..Meaning if the "Second" audio track on the list is "English" and Not "DTS" But "AC3" then extract track Number "2"...if you want to use "Vob2Audio" you have to use "DVD2AVI" first to make a D2V file, but if you used "SmartRipper" then there should allready be a "D2V" file in with the "Vob" files...I ripped "Castaways" when it first came out on DVD and from what I remember I didn"t have a Problem with it....

You are definitely doing something wrong somewhere. There isn't a DVD on this planet that has DTS as the only audio track as this would be illegal as defined by the DVD specs.

Do as minion suggests and look for the Ac3 track under where it says 'Stream info' in the text folder called something like vts_02_INFO.txt.
It is almost always the first audio track and will look something like this:

Stream[002] X=[[0x80] Audio English AC3(6Ch) 48kHz

Note the stream number, in this case it is [0x80] then choose that stream in VOB2AUDIO.

If you used the latest version of Smartripper you will already have a .d2v file in your VOB folder. If not create one with DVD2AVI but check 'None' under Audio>Track number. This will create a .d2v without the wav file.

Now simply use the Wav from VOB2AUDIO and the .d2v from Smartripper or DVD2AVI in TMPG.

As a note this is the best and fastest way to rip a DVD and is the way I use and hardly ever have any problems with it.

ASHY

Ashy, I searched the .txt file, and "stream 3" is the first audio track that is AC3 and english...does that mean I want track 3?
using DVD2AVI to make the .D2V file and VOB2Audio to make the .WAV file worked fine...
I never knew that Smart Ripper made it's own .D2V project file...can TmpgEnc use that?
thank you...I have learned something again.
-Don

Yes you can use the .d2v file that Smartripper creates and VOB2AUDIO for the wav. Just don't delete DVD2AVI as it is still required to decode the VOBS.

Did everything work OK?

ASHY