Newbie here,

Downloaded all necessary software from afterdawn.com (Smart Ripper, DVD2AVI, TMPGEnc.) I've following all the directions perfectly. Now when I use TMPGEnc to open my d2v file, it says "it can not open, or unsupported". I have downloaded the VFAPI plugin and is properly installed. Trying this whole DVD/VCD thing on my new Athlon XP 1800 computer with 512 PC2700 DDR! Am I doing something wrong or is it the new Lord of the Rings DVD has to much antipiracy software in it?

Sounds like you did something wrong in your frame serving part(the use of DVD2AVI). I've finished making a Lord of the Rings XVCD last week, and it came out great! The programs I used were CladDVD XP w/ DVD2AVI bundled, and of course TMPGenc 2.57. I usually use CladDVD XP to do both my ripping and frame serving at ounce. CladDVD XP has a function that goes automatically (should you choose the option) to DVD2AVI after ripping. Smartripper is great when you want alot more info off your DVD and not just the basics that CladDVD XP offers. You'll have to trouble shoot the options in DVD2AVI to see which option you mistakenly did or didn't choose. Since you didn't write down which settings you choosed, I can't help you find the problem. Check with VCDHelp.com to see their guides on setting up DVD2AVI. Good Luck

The message comes from several things.

DVD2AVI and the plugin vfp need to be in the same directory.

The audio and video ( mymovie.d2v and mymovie.wav) need to be in the same directory.

The finicky issue which I have verified over -over again. It the files can't be moved before imprting into TMPGENC. If you move them from there original location you will get that error. If move them and put them back you will get the error.

Last if you create and leave the D2v project in the directory where the dvd files are you eliminate your problem.

Frustrating but I have seen it

I've run into this problem also. I've also tried to send the created audio and vob file with the d2v file to another machine by way of a mapped drive and it doesn't work either. Any definitive way to get this to work?

Kahnman,

Thanks a million buddy! My fault was that (being a newbie) I cut the movie's .wav file and pasted it in another folder. Basically I created two folders, one for the video and the other for the audio. Now I know, just leaving all the work that DVD2AVI does in one folder. Then, when you use TMPGEnc, and asks for a 2DV file, just point it to the one in that single folder.

Wheeew! This whole new DVD ripping thing has got me all excited again about computers.

Question for all of you folks, which do you prefer VCD, SVCD or DivX?


Thanks again all!

Oh and one more thing,

Lord of the Rings on 3 CD's turned out beautifully. I've even made a nice custom Menu page with my own photoshop made logo (Eventhough there's only one link per CD) courtesy of Nero Burning Rom 5.5.9.0 !

Thanks again all :)!

Picture perfect details on how to make VCDs are courtesy of www.afterdawn.com

http://www.afterdawn.com/articles/archive/dvd2vcd_with_smart_dvd2avi_tmpgenc.cfm?wide=true

I am a newbie to Tmpgenc. I have only been encoding/burning with Nero for a month or so. I downloaded a video that was in Divx format, and had to search to find a codec pack so that I could hear the sound in Windows Media Player (and the Divx player)

Meantime, I thought that maybe if I just burned it onto CD, Nero might get the sound onto the CD so that my DVD player would play it. Didn't happen, so I have yet another coaster, albeit one with pretty awesome picture quality. After installing the codecs, though, the sound works fine in either player on my computer.... so I know it is there.

Found this site after reading MANY BB's. Downloaded Tmpgenc and am now encoding the video again. Read on THIS bb that I may need to convert the sound to a wav file with Virtual Dub. Downloaded & installed that, but haven't yet figured out how to extract the sound file :-( Any pointers to help with this process? The Virtual Dub help files don't address the issue.

I hate to abort the encoding that has been processing for a couple of hours at this point, but I need to know if there is a way to TEST the encoded file before burning it, to see if the sound is indeed there?

This BB community is GREAT, BTW! :-)

You can play the file in media player , but if you want to see what it will look like on your TV you will need a software DVD player like Cyberlinks Power DVD.

To extract the audio to a wav file with Virtual dub is totally simple , you just load in your file then go to "file" to "Save as wav" and that is it.......

Hi!!!

I don't understand much of it, but I tried. Well, I have some videos in AVI type and I wanna to change it for MPEG. I changed it, but there is no sound!!! Please help me!!!

I have the same problem. The sound worked when i played it in AVI.

You should ALLWAYS extract the audio from your avi files to wav file with "Virtual dub" and use that as your audio source..Tmpgenc does not like compressed audio sources and most AVI files especially ones downloaded off the net have compressed audio ........

on trying to convert from avi to mpeg ,as soon as i start i get an error message index of scan line is out of range(240). any help would be appreciated

hi,
i have a new computer with Windows XP
My problem:
Always when I want to encode avi (divx) to mpeg1 tmpg works for a few seconds and then suddenly my computer shuts completely down.
I tried to convert the film with Ulead MovieFactory.
I had the same problem. Does anyone have the same problem and knows the answer?
I think that it could be a problem because of Windows XP or a problem because of my new graphic-card (Gainward Geforce 4 TI 4200 128 DDR-Ram)
Thanks for all replies!!!


Moppel

Maybe an irq conflict?

It probably isn"t with XP cuz I just got a new computer with XP and it runs fine... but the way to find out is to take out your graphics card and see if it works...have you tried to encode different files???

thanks for your replies
tomorrow i will try to find out if it is the gcard and yes i tryed to convert different films

oops?
am i alone with this problem?
made a film a little bit too long and now i tried to cut them with the mgegtools (never used them sincd the old 12a version)
but the tool doesen't work...
can't mark in or mark out...just setting end mark time manually...
i can't use the next frame button...and it's always in the "pause mode", if i click the play button, the pause mode appears again...
someone an idea?

I used to have simular problems with versions 2.56 and earlier but the newest 2.57 version seems to work fine in that respect accept it seems to have a header writeing problem...what version are you useing? the only thing you can do when the mpeg tools just wont work right is to use a different mpeg editor, you can download a couple different demo"s at http://apachez.net

hm, now it works...seems really to be a header prob...thx

I bought a mac. Finally, no more errors or crashes. Best bug fix ever. Perfect, fast and easy video conversion and editing. The mhz myth is just that, a myth.

Why tell us????Tmpgenc doesn"t run on a MAC so I think you are talking to the wrong poeple....I got rid of my IMac cuz it wasn"t very compatible...

The iMac is very compatable, its just that many windoze apps
(like TmpGenc) don't support 'standard' file formats like
quicktime, and when they do, its only half-assed.

I do all my video/editing work on my iMac, but transfer the
final output to a fast x86 machine for conversion and DVD
burning.

It may take an extra step or two, but the results are
superior...

ron

When using version 2.57 free & plus trial version I always get a "Stream reading error" when cutting or multiplexing a mpeg2 stream to SVCD.

In versions 2.56 I don't have these errors.

The file I used was a Divx5 file with uncompressed audio frameserved with virtualdub4.10 & subtitle plugin used & converted to mpeg2 program stream with version 2.57.

just wandering i i'm the only one with this problem?

greetings

No you are not the only one I have had problems with the merge and cuz adding the SVCD header while editing or muxing, luckily the authoring programs I use do need the svcd header to author the svcd.......

Is there a prog which will let me chop my 3 gig mpeg into smaller sections to fit onto a CD, but where I can specify size not duration as you have to do in MPEG merge&cut ?

thanks

Olli

Yes .. you can use "BBMpeg" what you will have to do is de-mux your mpeg file then load it into the "multiplexor" in BBmpeg then specify how big of pieces your file will be cut into,so you can specify say 750mb and it will mux the files together but splitting them into 750mb parts..it is a bit of a hassle to de-mux the file but it does a good job of splitting them into parts.or you can try one of the mpeg editors here in the tools section:http://www.apachez.net

Hello,
I am running a Pentium 1.62 with a WD 7200SE HDD. My captures are fine. I can capture in MPEG 2 or MPEG 1 format without any problems what so ever. All my captures are flawless in any size or bitrate etc. But after I encode the file, the video and audio is fine for the first 50 minutes or so. after that the video and audio become out of sync. Are any of you guys having this problem? if so please let me know. Only thing that I can figure is that I need to beef up my memory from 256ddr to 512 or 1 gig maybe. I encode in Divx so if anybody is having the same problem or has a fix for this please let me know.
Thanks, Jimmy

If you are captureing to mpeg why do you want to re-encode them , just burn them to disk, if you capture to the correct resolution... but if you are going to encode the files anyway then capture to an avi format then the quality will be better cuz mpeg is a lossy format and there are some avi codecs that are pretty close to loss-less, are you dropping any frames while captureing??I run and Intel 1.7ghz and 256mb ddr-ram and have a 20 and a 7200rpm 60gb hard drive and I sometimes drop and few frames especially captureing to mpeg, this can cause de-sync...but if I capture to avi I don"t drop any frames...just a thought.......

Converting a 237 min avi/divx movie , after 55 min 55 sec movie time i get

"Write error occurred at address 0048715A of module TMPEGEnc.exe with 00235000"

TMPEGEnc version 2.57.41.146 Core 1.90.138 (previous versions down to 2.54 give same error). It's not a crash, TMPEGEnc can accept its Start button and begins conversion of movie again from the beginning.

- system is P4 with 512M Ram
- have tried both PAL VCD and PAL SVCD.
- have defrag'd HD and checked for bad sectors.
- have 4G free space in TEMP
- have 10G of free space on destination

?Any suggestions?

Find out exactly what frame it stoped encodeing at then use the "source range" to start encodeing another file were it stopped encodeing then use the "merge and cut" to join the two mpeg files into one, if it is done properly you will hardly notice the transition...if iti happens at the same place every time then there is probably a error in your file at the poion were it stopped encodeing..

Hi again,
I just tried running the same avi/divx file throug Ulead Videostudio6, producing an SVCD quality output without any problems. So if it's an error in the input file, its not bad enough to stop the Ulead software but TMPEGEnc stops every time.
I would suggest improving the error message with more info and maybe add some sort of recovery or "skip and continue" .

Regards
petf

I have tried to convert an avi file to mpeg using tmpg, but when I view the mpeg file after conversion all I have is a black screen, and the audio is OK
Please help

OK I had a look through previous posts and found my answer

If you can"t see the movie in the Tmpgenc encodeng screen then there is not going to be a picture.... what probably need to do is raise the priority of the direct show files reader in the vfapi plugins, you do this by going to "Options" to "Enviromental Settings" to "vfapi plugins" and raise the "Direct Show File Reader" to "1" or "2"....this should make the picture viewable in the encodeing screen to you know if it is working right..

OK i get this error right when i the start button. "Write error occoured at address 00401C9F of module 'tmpgenc.exe' with 01CED204

wow you are right it is working i hope it takes the entire thing.

Ok the entire avi was put into an mpeg now my problem is i have no sound.

You should ALLWAYS extract the audio from your avi file to wav file with "Virtual Dub" cuz Tmpgenc does not like compressed audio formats and most avi file have compressed audio...

Where do i get virtual dub?