Hi...what is the equivalent of this program for a MAC? Thanks.

No! There is nothing on the Mac... and I'm not an anti-mac. I'm a former Mac user, I switched 6 months ago to Win XP and I have to say I don't regret it at all. I had a very nice P4-2,53Ghz computer for half the price of a prehistoric-G4. Win XP is very stable and has a "not so bad" interface. And when I see the stinking .mac strategies, the processor technology not evolving and the fact that you have to fully pay Jaguar... it really doesn't want to make me switch back! So, I'm now living in the dark side of force... and I love it :-p

Sorry for this "guy who has been very disappointed with the Mac" interlude" :-D

ok i have quite afew movies and been converting them to mpeg
any way to cut a long story short
every time i convert the movies end up in letterbox format
is there any way to keep them full screen or if in letterbox to increase height so that i can watch in full screen
i am in pal by the way
thanks

In the advanced settings under "Clip Frame" you can arrange the screen so there are no black borders and you can use the "video arrange setting" to help you do this also....

I use the TMPG Enc to cut my video cd movies , but after cutting the mpegs files I didn t found the files in the out put. I have try many time , but almost the same problem . I hope you can help me thank you!!!

Hi all,

I'm trying to encode a 10gb avi file to an mpeg2 svcd.

I have captured a few different captures from my dc30 card under windows 2000.

when ever I try to reencode these files to mpeg 2 using tmpgenc 2.57, it seems to lock up at 00:11:54 minutes into the source video or 17873 frames.

if I leave it go, it will recover but all video after that point if black.

is this a tmpgenc issue or an issue with going over the 2gb avi file limit ?

Should I try and split the avi file up into 2gb chunks and then merge them together once they are mpeg2 ? if so, what tool should I use ?

Thanks in advance.

Can you playback the file with Windows media player?
If not, TMPGEnc would not encode it.
If yes, go to "options" > "enviromental settings" > "vfapi plugins" and raise the "direct show file reader" to "2", this might help.

anyone else had any luck with avi files over 2gb ?

I can use vdub to rebuild the index but it then makes the audio/video out of sync big time.

I have same question as ffast has.
Can you playback the file with Windows media player?

And which OS and filesystem are you using?

no i can't play back with media player.

but tmpgenc does the first 11 minutes with out any problems at all.

It's windows 2000 with NTFS.

I have used vdub to rebuild the missing index's in the avi file but that then leads to audio/sync being way out by several minutes by the end of the file.

> no i can't play back with media player.

If the file can not be playback with media player, it can not
be encoded properly. This is 1st minimum condition to be
encoded properly with TMPGEnc.
You may need certain codec to play first anyway.

thanks

that's the thing, tmpgenc opens the file and will convert the first 11 minutes.

I know that it's because of the avi missing the key index frames after the first 2gb.

is there anyway of getting tmpgenc to ignore that the key index frames are missing ?

I convert my downloaded anime episodes with TMPGenc. However, this one episode that was around 170 megs, converted to around 600 megs, while the rest was around 200. I do not know why this is happening please help me.

The input size has nothing to do with the output size, the output size is directly related to the length of the input file and the bitrate used, so takeing this in mind if the file is still to big the only thing I can think of is if you are doing a vcd in the settings under "System" change it to "video-cd non-standard".......

Hello,

I have a question about 2 pass VBR settings. I take home movies on my canon DV camera which I then edit in an editor and produces a nice AVI file. I then drag this file into TMPGencoder and make SVCD movies (NTSC). I have had my settings set to average bitrate 2520, max bit rate 2520 and minimum to 300.

I have had someone comment to me that my minimum bit rate is set too low. My question to you is what is a fairly averag setting all of you use out there for minimum. I mean I usually try to fit my DV movies (33 minutes) on one 700 mb CDR and works just fine. If I set the minimum to let's say, 1100, does this change the size of the file too much and does the CD become non SVCD mPEG compatibel?

Pierre...

I am old but still going strong...

I wouldn"t say that you minimum is really too low but all your settings are off, you sort of defeat the purpose of encodeing to VBR if your average and maximum are the same, that means that your file will be closer to a CBR stream than a VBR stream,that is why you are only getting 33 minutes on a CD-r, you can get much better quality and get up to 45 minutes or more on a cd-r if you tried settings something like 500kbs minimum 2250 average and 5000kbs max..With these settings you will have a true VBR mpeg stream with a higher max bitrate the average is about the same and the minimum..I used these settings last night on a 704 by 480 file and got 43 minutes and the file was 707mb so I could still have fit another 75mb on this file(you can get 795mb on a 80 min cd-r) and the file looks great...These numbers are just an example of worked good for me but a VBR stream is supposed to be encoded with parameters simular to this.......

Personnally I prefer CQ than 2-pass VBR... thanks to ASHY I use Max. 4000, min. 1800 and CQ 65... I have very great results and at least 60 minutes with it!

Thanks again ASHY ;-)

Thanks for the reply. However, one very important question. If I am not mistaken, True SVCD has a maximum of 2520 kb. Does this not mean that if I put the maximum at 5000 kb and at times it goes that high, my Pioneer player can't read it?

maybe you should check on www.vcdhelp.com for the compatibility list but lots of DVD players are able to read what we could call XSVCD... mine (a JVC) read them perfectly...

Your right that certain players may not read the higher bitrate and could choke your player, so check out VCDhelp to see ehat it can handle.
As far as encoding goes you will find, as do many of the others on this BBS, that the CQ method will yeild superior results to the 2 pass method in most cases.

Regarding the chosen bitrate settings as Nico has pointed out, why the minimum bitrate of 1800 kb/s?
This is because due to extensive testing with various settings and different movies I came to the conclusion that 1800 is the minimum setting possible when encoding to MPEG2 to prevent the dreaded macro blocks.
Any lower and macro blocks begin to appear in normal scenes and using this bitrate prevents this.
With the quality setting at 65% it seems to be enough to keep the bitrate at a reasonably high enough level and allow TMPG to adjust the bitrate high enough to compensate for faster action scenes without introducing blockiness and produce a small enough file size to allow most movies to fit on 2 disks.

Also in my opinion it is better to use the standard 480x480 resolution for SVCD rather than 704x480 0r 720x480.
Why? Because I have found that the difference in picture quality of the two resolutions when viewed on a standard TV is not that great or noticable and seeing as higher resolutions need more bitrate, it is better to use that valuble bitrate to improve the picture quality of a 480x480 image.
By this I mean I would rather give up a little less and hardly noticible sharpness rather than run out of bitrate because of the higher resolution on high action scenes and thus end up with horrible macro blocks.

These settings weren't just pulled out of a hat, but were eventually arrived upon after many tests with both TMPG and CCE and the settings are true for both these encoders.

So in conclusion I would say CQ is the way to go for improved image vs filesize quality.

ASHY

Thanks for all the wonderful info. One last comment though. My old Pioneer 343 plays anything I throw at it. SVCD XSVCD DVD-R etc. I see no problem there. However, the point of filming home movies is so I can supply the rest of my family in Europe (I'm in the US) with acceptable formats they can play. I feel that most of them can play the better quality, however, some are having problem with higher bitrates.

Now, If I use CQ and set the high to be 2520 and the low to be 1800 and then Quality to 100%. Will this yield a good quality flick that will fit on a 700 MB CDR MPEG2...(about 30 minutes of video).. or is that set too high?

P>S I guess I can test my way but I don't have a finsihed edited 22 gig avi file now to convert... :-(

Thanks..

If you are trying to keep your files totally compliant so they will play on the biggest variety of dvd players then the 1800min and 2520max 100 quality would be the best bet but if you lower the quality level to say 85 then you will be able to fit more on a cd-r and not loose any noticeable quality...I like useing the higher resolutions for movies that have a lot of action but you do need to raise the bitrate a bit to keep the same quality...

If you only intend to put 30 mins of video on to a disk then you may as well stick with CBR and the standard bitrate as it's pointless going any lower with the bitrate because 30 mins will easily fit on to an 800mb disk at this bitrate. It may even be possible to use max resolution with this bitrate and still fit it on to an 800mb disk.

ASHY

Will it ever be possible to paus, save and restart the enconding eg. to reboot the system ?

In a way. Just click stop when you desire to pause then don't click ok in the confirmation box. Put your PC into hibernation. When you restart your PC just cancel the abort and TMPG will continue encoding.

ASHY

Is it possible to use a *.ac3 audio file?
do i need a plugin?

Please help, I'm trying to keep a dolby surrond sound with a music dvd

Ciao
Rob

Just use the multiplexer in the MPEGtools to multiplex the Ac3 with your movie.

ASHY

I would like to convert MOV files into MPEG format. There¡­s a plugin or something that allow me to do it? I need help quickly.

http://www.geocities.com/SiliconValley/4942/QTReader.zip

This is a plugin QuickTime reader for
the TMPGEnc mpeg encoder. You just copy this file into
TMPGEnc's folder and you should then be able to read
any QuickTime movie.

ASHY

anyone help this not happen? I'll ftp you something nifty if you can.

md@punkrocksex.com

If you using winXP get Morgan JPEG codec and check invert field

anyone got the update for DVDit 2.5 to keep it from crashing? (answer via e-mail please)


mdog

Dear Group,
Am about to order a DVD writer and am currently trying different TMPGENC settings to create MPEG2 from my AVI files. I have found some very helpfull hints in this group but have been unable to remove the blocky or pixelated artefacts from the edges of objects during motion. I have no idea what this will look like on the 32" TV but is clearly noticeable on my 17" monitor. My source is a Sony DV camera.

So far I have tried:

Resolution 720 x 576 and:

a) 2 pass VBR, 8000 max, 3500 min, 6200 average with high quality motion search, DC component precision-10 bits, VBV buffer to auto

or

b) CQ VBR, quality setting 62

I can't see much difference between either method although b) seems to be faster.

Suggestions,

Cheers,

Al

Those jagged edges are most likely Interlace lines and shouldn"t show up very much on your Interlaced TV but do show up on a Progressive Monitor, but if you want to get rid of then so they won"t show up on either then try Useing the De-interlace filter in the advanced tab, There are about 25 different filters to choose from so what I do is move the slider till you get to a frame were it looks really noticeable then just go through the filters till you find the best looking one.......