This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
TMPGEnc 2.5 (Free or plus version) BBS [ Sorted by thread creation date ]
When converting a NTSC avi down to a VCD compliant PAL file destination file (mpeg) seems to glitch every few seconds - I feel this has something to do with the frame rates - any option on tmpg to solve this?? Cheers people.
Hmm, If your standalone player supports it to play NTSC CDs or DVDs on a PAL TV Set stay with NTSC. Its too much fuss to convert it.
BTW: If someone has an half decend way to make an 23 fps NTSC stream out of an 25 fps PAL stream tell us. :) I hate to say but bur getting more than 70 mins of film on an SVCD PAL stinks ;-/
Ok there is one method I have been testing that works quite well and is less fuss than the usual method of stretching/shrinking the audio to match the length of the changed framerate avi.
The method I have been testing uses AVIsynth.
Some people may think AVIsynth is difficult to use, but once you get the hang of it, it is really quite simple. This method is similar to the way professional converters do the job.
Now rename the file with an .avs extension.
Thats it, the only difference you will have is the paths to the files.
Then it is a simple case of loading the .avs file and the DVD2AVI wav file into TMPG and resizing and clipping as normal.
This method is much better than TMPG as there aren't as many motion artifacts, the only thing I have noticed is slight blurring in some motion scenes, but is really only noticable if you look hard and is typical of the effect you get with professional converters.
To convert NTSC to PAL is a little more difficult unless the source is 23.976 progressive frames, if this is the case then it is a simple case of following the instructions above, but obviously changing the framerate to the required one.
If the source is 29.97 with pulldown added then I would urge you to use DVD2AVI to remove the pulldown and return the movie back to 23.976 progressive frames.
If not then we will have to use AVIsynth to de-interlace the movie first. A script such as below is needed.
Doing Frame rate conversion with Tmpgenc will allways give you jumpy playback.It is quite difficult to do a frame rate conversion from 29.9fps to 25fps so if you can play ntsc movies on your pal set up then go for it cuz the alternitive is quite hard to do .It is a lot easier to do a 23.9fps to a 25fps or visa versa.,Dut doing a 23.9fps to 25fps is a lot easier you just use "avi frame rate converter" to change the frame rate of your avi to 25fps then you use a audio editing program like "cool edit" or "sound forge 5 or 6" to shrink the audio file to the new length of the avi file(the length shortens when changeing the frame rate) then you encode and mux the audio and video together..That is the very short way of explaining it but that is basicly it, if you wan"t a more explained way to do it use the "Search" function at the top of this BBS, cuz it has been explained quite a few times here...
I have tried to search for this answer but have been unsuccessful thus far. What I have done in the past is edit in premier and export the video only to tmpgenc for encoding to mpeg2. Then i export a separate wav file from premier then join the two later in DVDit. My problems started to occur after I started using Ulead DVD workshop which doesn't support bringing in two streams separately. Is there any way to accomplish this without encoding the audio? I realize the benefits of encoding the audio to compress the file but I have heard that some set top players have a hard time playing mpeg audio. Any comments on that statement would also be appreciated.
Most dvd players will NOT have a problem with Mpeg audio, I have heard this also but I do not believe it to be true cuz i worked in a big name electronics store and every player there played mpeg audio.and most authoring programs will encode the audio to mpeg .But if you are concerned about this you can allways use AC3(Dolby Digital) audio and mux it with the video and import it into Ulead but I don"t know if Ulead supports AC3, but you should try useing the mp2 audio cuz I"m sure you won"t have a problem with it...
I also agree that it is doubtful any players will have a hard time with MPEG audio. As far as I'm aware MPEG audio is included in the DVD specification and thus this means every DVD player has to support it.
As minion suggests why not go the whole hog and convert to Ac3, this will not only ensure that the audio is fully compatible, but it will be of higher quality and also I have noticed that Ac3 streams are usually smaller in size than ordinary MPEG2 audio.
Thanks for the advice on MPEG audio as I wasn't sure it would be a problem. I noticed my Pioneer Dv 525 plays it fine but only after changing the setting in the setup to except the stream. Will the newer players automatically detect this and accomodate it for the user?
I'll give AC3 a shot and see how it works out. Any advice on a encoder would also be appreciated.
Ok. I can't figure this one out. I found some programs to encode to AC3. I started using AC3Machine to encode my wav file from premier. I think I got it to work since the 1 min clip I was playing with went from 4mb to about 480kbs. it plays fine on the PC using media player. I then tried to multiplex with bbmpeg. This is where i got lost. Any help is appreciated as I am in the dark on this one.
Where are you lost???Tmpgenc should multiplex ac3 streams for you it just doesn"t encode them .I haven"t tried it but I know poeple have done it before..
I guess my problem is that I have never done it before so I really don't know where to begin. When I tried it with TMPGenc it said I had and inllegal mpeg audiostream. I tried both simple multiplex and multiplex under mpeg tools
Here is an example of a metrix I used today for a VCD which brough better results then the default setting. I use it with maximum block noise removal, and for picture noise removal I used: 20, 1, 20.
Your Matrix should cut down size drastically but with the drawback that next to all details(high frequencies)are lost. For low quality and noisy sources this might be a good thing ...
Developing a Matrix is sort of trial and error and frankly I for my part have far more errors than success. Eg. you have to take in account the resolution, GOP structure, min/max Bitrate and other things... if you have a good setting for VCDs and change the resolution to SCVD you migt want(have)to change your Matrix too.
BTW, speaking of GOP, I was wondering, in "force picture type" what is exactly B copy and P copy?
And if I want to make a closed GOP should I have a P frame followed by an I frame that is selected as a new GOP?
I wanted to merge 2 files about 400k each that had different data rates. I loaded each as a new project and saved them as separate files. When I merged them, the output file was 5 times larger over 3 MB.
How do I merge the files so that one files justs appends to the other.
If you try to merge two files with data rates that are different, tmpgenc will pad the data from the file with the lower data rate so it matches the file with the higher data rate.You can not merge two files with different specs..What you can do is re-encode the two files to the same settings then merge them to one file but you will loose a bit of quality when re-encodeing...
Hmm, I may have to disagree, I have done this on several occasions using TMPG and the file size has been relatively the same, maybe slightly larger due to a little overhead, but I don't think TMPG adds any padding. There is no reason why two differing bitrate MPEGs can't be joined. The header in the file will simply be changed to reflect it is now a VBR MPEG.
What are the specs of the files and what was the 'stream type' you chose when merging the MPEGs.
I am encoding in TMPGE and using Uleads DVD workshop for authoring and burning.
My question is - does Uleads workshop re encode if you are aready giving it Mpeg2?
ed
This is one of the problems I had with "ulead dvd workshop" if I mad a svcd file that was a bit out of the "ulead" specs then it would re-encode the file it wouls even re-encode the file if it was totaly svcd compliant but it had a frame rate that was 23.9fps for some reason "ulead" doesn"t recognize "ntsc film" as a valid svcd format. So switched to the "ulead dvd plugin" cuz it allows you to do xvcd/xsvcd"s pluss it does simular menu"s and chapters as dvd workshop and you can add titles also cuz you have to use the dvd plugin with "ulead video studio" or "ulead media studio" and with these programs you can do titles easily, so if you are doing xsvcd"s or xvcd"s then useing the dvd pligin might be what you are lookin for..But if the dvd workshop update solves the problem also then go for it.....
I am using DVD workshop as well and have made a custom template with a bitrate that is slightly lower than that what I import and check the box that says do not re-encode compliant files. This should solve it for you.
i know its not very god but you can see the message !
this ocours when i try to load a vob file into tmpg enc 2.57 !!
I have the filters from PowerDVD installed !
Are you loading VOB files directly into Tmpgenc????You shouldn"t do this for a few reasons, Tmpgenc has problems seperateing all the differant streams in a vob file, and it take up to 5 times as long to encode a raw vob file to a mpeg file as opposed to frame serveing it, and Tmpgenc isn"t made to encode raw vob files. The correct way to encode vob files with Tmpgenc is to "Frame Serve" them from "DVD2AVI".This is a easy and quick way to encode Vob files pluss you can extract the correct audio tracks with dvd2avi and into a format that tmpgenc can encode(wav)..So go download dvd2avi and i"m sure all of your vob encodeing problems will be solved.......
Yeah i know about DVD2AVI but i make a mistake i think the new version of TMPG ENC can load VOB files directly...But it cant (yet) so i use DVD 2 AVI (very good Pogramm) !
Hello,
I know that this site is devoted to the TMPG Encoder, but I didn't find a forum for the Ligos encoder. That said, has anyone had the problem that after capturing video from a miniDV camera via firewire into Premiere, and then exporting a timeline from Premiere 6.02 using the LSX MPEG-2 DVD assets setting, that sometime during the transcoding Premiere just quits by itself. I have the registered LSX Mpeg Suite 2.0. My Adobe Premiere project is about an hour long and about 7 minutes into the process Premiere just quits. Any help regarding this matter would be appreciated.
Another question that I have is regarding the actual transcoding speed. I am running a P4 2.0 ghz, 512 DDR Ramm, 100 GB HD. Is there anyway to make the transfer speed closer to real time cause right now I'm looking at about 3:1 or 4:1. Thanks a lot,
Eugene
Exporting from Premier allways takes forever so what i have been doing with Premier is to Render the file Into an avi format(is way quicker that exporting to an encoder)Then use Tmpgenc to encode the finnished project to mpeg.With your system you should be able to encode with tmpgenc in real time,There is a way to use tmpgenc with Premier but I don"t know the link to were to find the plugin module to get Tmpgenc to work with Premier but if I find it I will post back........
Here"s a link to a "premier video server plugin" that will alow you to use Tmpgenc as a plugin for Premier it is supposed to be a bit quicker than "aviSynth" but from what i hear it will take a very long time to encode to mpeg2 from Premier, so i would sugest maybe rendering to an avi format(uncompressed or lossless would be best)Then encode with Tmpgenc .It would still take half the time as premier would, anyway heres the link: http://www.marcpeters.co.uk/downloads.html
In my humble experience, outputing using the premier video server plugin is ALWAYS going to be quicker than creating an intermediary AVI file... Edwin's tool essentially creates a "dummy" AVI file to encode (so you elimate a step of the process). Additionally, AVI files eat up hard disk space; so eliminating this step means you don't have to worry about disk space!
I am trying to encode jpg files into mpg. Works just fine but when I play the mpg back it looks as if though it were encoded in fast forward. The pics are about 10k in size. Is there a way to slow down the frame rate process or did I miss a setting someplace?
i tryed to cut an (audio video) mpeg file with the "edit" funtion of TMPEGenc but the resultant file is without audio how is it possible?
Thanks a lot,
Fabio
This kind of stuff allways happent with the "mpeg tools" and how is it possible ?Who knows it just happens try again and if it keeps happening then use a differant mpeg editor.The mpeg tools are a bit buggy and no amount of time trying to figure out the problem will help ,it"s best just to use a different mpeg editor,go to :http://www.apachez.net/ and go to the "tools" section and there are a few mpeg editors for download, I would sugest "m2-edit pro"
What does this option exactly mean in TMPGenc. Has it only to do with the audio conversion. If I have a file with 24 fps and make a PAL movie, it still
will be converted to 25 fps, only thing is that the audio is out of sync. If you timestretch the audio before with an other program it works fine and your movie isn't jerky anymore.
I tried to find answer here to my question with no success, so please
forgive me if someone asked this before:
There is any difference between CQ, VBR, 2pVBR in the case of
SVCD if I use the CBR method buth with the maximum possible bitrate
(2520) ?
Theoretically there is no difference, because if i select for example CQ
and 100% quality, i think the encoder will use the maximum available
bitrate which is 2520 and this is equal with CBR 2520. Or I am wrong ???
In terms of mpeg2 quality there's a big difference between the CQ setting and a two-pass.
I first tried this encoder with footage from a digital video (DV) camera; I naturaly chose two-pass, since I assumed this would give me the best results. I spent a while going through the settings, to optimise the picture quality, and hit "start". When I played back the encoded vid I was dissapointed to say the least: there were quite visible macroblocks, and the picture looked generally washed out. I was going to give up on TMP, but then spotted the CQ setting. "Constant Quality", I thought "this should be interesting". Anyway I set the encoder off again having chosen a CQ of 80% and max bitrate (for DVD) of 8MB/s. This time, when I played the encoded vid I was very happy indeed. The resultant mpeg was very close in quality to the origional, a little smoother perhaps - but smooting is part and parcel of mpeg encoding - and the colours seemed a little more vivid - not over saturated - just a little it more vivid.
I now use TMP to transcode mpeg2's produced from a digital tv card to DVD compliant mpeg2. I use CQ=100% and max bitrate 8MB/s, and motion search set to highest.
The results on my DVD player are some of the best TV images I've ever seen.
Setting a max bitrate in CQ of 2520 is not the same as having a constant bitrate of 2520. With a CQ of 2520, the encoder will only use this bitrate if it necessary, eg during motion within a scene, or water or smoke effects. Having a constant bitrate of 2520 would be much less efficient, since you would be using this bitrate all the time which would require a lot more disk space (more CD's), but still end up with the same overall quality as the CQ encode.
So, if we did not talk about the size issue, then
the (CQ 100% 2520) and (CBR 2520) will produce the same
quality output .?
The reason why I am not checking the size is I would like to
make a 2x80min cd svcd from and 1hr20mins source, and this
is perfectly fit to the 2 cd even with the 2520 constant bitrate.
If you're happy twith the resultant quality then go ahead. However, you would be able to use a higher CQ setting for those 2 CD's. The problem would be that you wouldn't know the final file sizes, 'till the encoding had been completed.