Can anyone tell me why the subtitles setting is set to subs1 all the time.
When i press subs 2 and then restart the player again it goes to 1
Also if i put default none subs does it mean that if i put subs 1 on it wont show?
Cheers

when i try to create a blu-ray disc from a over the air capture in mpeg-2 ts format author works 4 crashes unless i allow it to render the file first then it works but this takes over 8 hours when i authour a dvd it does not require to render the video so i can create the dvd in a matter of 10 minutes or so
any idea why it want to re-encode the video for blu-ray?

I have a large HiDef file I want to edit with XPress (AVCHD format; m2ts extension). I can load it into XPress OK and edit out adverts OK.

But then I only want to resave the file IN THE SAME FORMAT without conversion or re-encoding - only minus the cuts I have made. Is this possible? If so, how?

I don't see any template to output the file in the same format as the input format?

Thx
NigelS

There's no AVCHD output so no, it's not possible. Even if there were an AVCHD output, it would still re-encode everything...at least, that's what happens if you take a DivX file and output as a DivX file for example.
Conversion is its main purpose after all, not editing.

Yes, it is mainly for conversion, but it does have a really nice setting of editing tools that make editing out TV ads really easy.

you can do it to the extension , by select either hd or bluray output, select the mpeg output on the right which will bring up a new settings (if you then look on the left colum you will have 2 selections, the top one is the main default so right click and delete)

then its a case of messing with the settings

it will still encode slightly becuase of the cuts to the file.

As per title...

can You 'smart render' AVCHD' and output to a folder (not a BD disk)?

Don't think so...my AVCHD footage is set to full-render by default, which means smart rendering can't be applied. Most likely it is because AVCHD uses MPEG-4 AVC/H.264. Smart rendering will only be applied to MPEG-2 video for BD output.

Thanks for the confirmation.

I think AVCHD was just an after thought with Author Works 4.

Can't understand why there is so much emphasis on BD output when AVHCHD to <ANY OTHER MEDIA> is quite standard now with domestic hd camcorders.

Author Works is way behind it's competitors as far as AVCHD is concerned.

I think it's more the limitation of their smart rendering engine being limited to MPEG-2/DivX. I think that's why they don't have H.264 Blu-ray output.

Remember that using smart rendering depends on your output format. You can output your AVCHD as a DVD or DivX but it won't be smart rendered (even if their engine supported H.264) since H.264 is not compliant with the DVD-Video or DivX Ultra format--it would have to re-encode it regardless.

I think they only mention blu-ray and AVCHD together because they figure if you wanted to shoot something in HD then you'd most likely want to keep the HD quality. You can output your AVCHD as a DVD or DivX (and not burn) but it would never be smart rendered.

I have a JVC Everio HD300 (AVCHD) camcorder,i am annoyed with the MTS files, for they counldn't be edit on Adobe Premiere but now i found out a fastest and easiest way to solve it-just use a professional HD Video converter which can convert MTS/TOD/MOD to wmv, mov, mp4, avi, etc. without any problem.The software seems to do a decent job. I've had good results converting the .mts files to .mov, with the settings mpeg2, 1200, 1280*720, 25fps, aac. The files look good on my PC running Adobe Premiere, edit easily, and convert well to DVD format.
http://www.pavtube.com/hd-video-converter/

I would like to ask if i import a vob which doesn't need to be re encoded and in the cut edit timeline cut some parts ,is it going to re encode the vob (since i have trimmed it)?

If it doesn't need to be re-encoded, then it won't re-encode the whole thing, it will only re-encode the few frames around the area you cut.

I would like to ask if i import a vob which doesn't need to be re encoded and in the cut edit timeline cut some parts ,is it going to re encode the vob (since i have trimmed it)?

Why the enable nvidia cuda setting does not work on the program?

i also clicked on the correct the performance optimization at next launch and nothing happens....when i'm converting... the cuda percentage is at 0,0%....

it is better convert using the hardware video decoder setting?

Can someone give me the details for putting the cuda working on the conversion?

If you're just doing a straight conversion, I don't think CUDA will be utilized. It's used when you are applying filters mostly.

cuda only wrks when you are using the filters, specifically strong filters such as the video noise reduciton

New updated available. Big addition is wtv input support. See revision history here:

http://tmpgenc.pegasys-inc.com/en/download/tme3_rireki.html

It would be great if there was a pause button for the batch encode tool in tmpgenc express.

Thanks

I think hitting the abort button on the active project will pause it. Then click on "No" to resume. Elapsed time will continue to increase, but the actual processing will be paused.

I think what you are talking about is in Tmpgenc eXpress itself. Im talking about the batch encode tool, its almost a completely different program. If you have the cpu meter on your gadgets in win7 you can tell that all cores are running while encoding. Theres nothing i can do, like putting the cpus on idle, to make the cores release like in the physical tmpgenc express programs does when you click abort.

No, I'm talking about the batch tool that you can access from the Windows start menu (Start menu--> All Programs --> TMPGEnc --> TMPGEnc 4.0 XPress --> Batch Encode Tool).

When clicking on abort, all CPU activity goes to 0% until you resume.
http://i50.tinypic.com/s58bxc.png

You are right, thank you! Im thinking maybe i didnt give it enough time to show me the cpus decreasing. Im sometimes impatient, lol who am I kidding, im impatient most of the time. Thanks for the help.

ps There should still be a pause button lol but im content with i got for now

Google the SysInternals utility Process Explorer. (www.sysinternals.com)
After it's opened up, right click on the process and select "Suspend".
Select "Restore" to continue.
This used to drive me nuts also until I found this freebee.
Works perfectly for me!

I want to ask is there a way to copy dvd9 into 2 dvd-5 but preserving the menu and
add a text "PLEASE INSERT DISC 2" or "please insert 1".I have tested few different programs but no one them have the text at end.
Thank you very much.

There's no way to import a menu from a DVD into this program so no, it's not possible.

Trying 100 different ways and cant seem to get what I want. Maybe there is no way?
I have 6 TRACKS but trying to not have all those have their own menu page.
Looking to see if it is possible to have -

----- TITLE (Play and Track menu)
-------- TITLE 2(from clicking Track Menu) - (List all tracks and choose and play from there)

Do I need to set up clips differently during source ?
Should I have only created ONE TRACK and just keep 'ADD FILE' from that point?

How's this:

Choose to make a custom menu from the menu wizard.
Checkmark the option to create a title page for your top menu. This page will have a Play All and Track button.
Choose "Top menu only" when the option comes up.

That's it!

Thanks for the reply and help but that doesn't do it.
What I want is 2 menu pages ONLY
One that has the DVD NAME, PLAY ALL and TRACK LIST
The other with ALL TRACKS (from clicking TRACK LIST on previous menu) by name and when one of the links is clicked, it just plays. I don't want i going to another menu page.

The menu I describe does exactly what you want and it is only two pages. Have you even tried it?

Your first page is the title page for the top menu (Play all, Track buttons). You will have to add the DVD name yourself, which is easy--just add a text item to the page.

Your second page is the top menu. This lists all of your tracks. If you select the "TOP MENU ONLY" option, clicking on a track thumbnail will simply play that track and not go to another menu.

I did try it but I think I know what may be the problem. I mentioned this in my first post. I have 6 TRACKS all separate.
Under ADD TRACK I have 6 tracks. I think I should have just done ONE and then from there, click ADD FILE 6 times (adding each clip) and then I would get what I want in the menu. I think I have to do it that way.

If you have all 6 in one track then they will play back-to-back as if it were all one movie.

If you want them to be separate clips, then keep them in separate tracks.

In other words, if you want 6 tracks to appear on your top menu, then you will need to have them in 6 separate tracks.

To expand on my last post...

It all depends on how you want your clips to be played.

If you want all 6 clips to act like one long movie, then put all the clips into one track. You can then think of each clip as a chapter. After a clip is done playing, it will automatically play the next clip instead of going back to the menu.
If this is what you want, then choose "Track menu only" instead of "Top menu only".

If you want each clip to be its own separate movie so that it goes back to the menu after the clip is done playing, then make a separate track for each clip and choose "Top menu only".

I think we aren't understanding each other LOL sorry ...

I am doing what you say but not getting the menu as I want.
Maybe image will help you understand what is all going on.

This is how I have things set up.
IMAGE 1
http://img34.imageshack.us/img34/4035/50033897.jpg

This is how I have my menu.
IMAGE 2
http://img534.imageshack.us/img534/8928/80048828.jpg

Notice I am at the menu with a PLAY ALL and TRACK MENU
If I click TRACK MENU, I get a menu for CLIP 1 and many link options; to play, go to next clip and so on.
http://img31.imageshack.us/img31/2826/20432692.jpg

I do not want that. I want to click TRACK MENU and have a menu page that has all my clips and I can click any one of them from there and just have them play and NOT go to another menu for that clip. Just play.

Does adding the images make more sense now on what I have and what I want?

Thanks again for the help :)

I see. Yes we're talking about two different things here lol.

Your tracks are set up correctly, it's the layout of your top menu that you need to change.

You're currently using a layout that only has one track per page so it's creating a page for each track. All you need to do is change it to a layout that has 6 tracks per page and you'll have them all on one page.
See the pic below for where to change this in the menu wizard. Any of the "#06" layouts should work for your needs.

http://i49.tinypic.com/33o712r.png

YES ! That is what I want !
Thanks so much for all the help. Glad showing images helped explain better hehe

Hi,

The above is simmilar to what I want to do, as I don't like thumbnails on my menu. If you could give a step by step look at how I would:
(a) from a menu picture eof my choice, place a button that would link to the first movie, and then on completion come back to the menu.

I don not want to have, mutible pages or thumbnails. If I can do this Authoring works, will now be regarded as the best in the world.
regards
Pete
Melbourne Australia

When trying to save as MPEG file I am stopped with message 'VBV buffer size too large for selected level'. How can I reduce the VBV buffer size so I can save the file? I have tried reducing the picture quality significantly but this makes no difference.