Hello test

Hi, ive been trying to encode a couple of files using tmpgenc but during the encode my pc reboots by itself, everytime!!! its really starting to piss me off. Im not sure whether its some components in my pc or if its a bug in tmpgenc...

any clues before i throw my pc out the window?

I have been playing with the "header trick" to see if I could play a SVCD on my Sony player. Here is what I was given and the guy says it works on his player, which is the same model as mine:

1. In TMPGenc, FILE/MPEG Tools
2. "Simple Multiplex"....end up with errors.
3. Select "MPEG-1 Video-CD
Now this next step really confuses me!!!
4. Video input 'Your MPEG file' - browse to AVSEQ01.mpg file
The only instance I see of AVSEQ01 is on the cd after it has been created. If it is only on the cd, on the D: drive, how can you use that file?
5. Output "destination for your finished file".

Is this method a farce or is there better instructions?

Thanks,
Jack

Why not just convert to SVCD with TMPGenc, then load the mpeg file into the Merge&Cut, select Type - MPEG1 Video CD (non standard), and hit Run .....

That seems to work!

Thanks for the help,
Jack

The Header-Trick is working on a wide range of DVD-Players.
File -> MPEG-Tools -> Simple Multiplex
Open the MPEG-File
Use Stream Type Video-CD (non standard)
Choose a new Name for the File
Hit Run-Button
Burn the File as VCD (you can use Nero to do this)

I downloaded TMPGenc 2 weeks ago, installed it and didn't do anything with it until today I tried it today as a "newbie." After an initial successful AVI-to-VCD encoding I tried a WMV-to-SVCD (MPEG-2) encoding.
This successfully produced a first MPEG-2 file (source range 0..68000) in less than 45min from the .wmv file.

Subsequently, I unfortunately moved the directory with the TMPGenc executable (including the .mfc templates) and started running into problems... I delete all TMPGenc related files, downloaded the software again, unzipped it, reloaded the SVCD-PAL .mfc file, and tried to use it again on the 2nd tranche (source range 67500..136000) of the .wmv file.

In the past 1.5 hours TMPGenc has produced 1.6MB (out of 770MB) and is listed as "Non Responding" for the most part (not always) in the Windows task manager.
I am running on Windows xp.
What went wrong?
I am in principle willing to buy the TMPGenc Plus version but only if I can be sure that this actually works going forward. Pls help.

Tmpgenc does not Fully support WMV files, sometimes it works and sometimes it doesn"t, I have had simular problems with encodeing WMV files ,It would encode up to a point then seem to stop, then a while later it would start again just to stop somewere else, you can allways encode your WMV files to AVI and encode that to mpeg......

The problem with .WMV is that is not the same as .AVI and therefor causes problems. It usues a microsoft mpeg4 codec, but for starters the wrapper is different. wmv's are handled different than avi's.
also wmv only knows 15 and 30 fps which is not standard anyway.
Every encoder i used so far has problems with wmv, except moviemaker.
(I wonder if MS tries to force us to use wmv?)

Well, I've been searching all over the net for another person who seems to have this problem and I've only come across one person, and it wasnt much help. I guess I'm some what of a newbie, so bear with me. I encode avi files into mpegs using TMPGEnc, and they look fine when I play them on my computer, they even look fine when I burn them and watch them on my DVD player, but only when I'm watching them on my DVD player will the video suddenly speed up while the sound remains the same so they get out of sync, and then the video slows way down to catch up with the audio it seems, it always goes back to normal but when I'm watching movies and this happens its quite annoying. If anyone has any Idea's that I might try they would be greatly appreciated, Its really starting to piss me off because I can't figure out what it is. Just for example one of the video's I'm doing it with has the following specs:

Resolution: 640 X 272
Bitrate: 1536 kbps
Frame Rate: 23 / s

I'm encoding them as NTSC Films, and the video arrange method I use is full screen (keep aspect ration 2), otherwise the film looks stretched out. I hope you can help me because god knows I can't help myself. Please respond if you know of anything I might try, or E-Mail me at Rellik2003@hotmail.com

Hi... The symptoms that you describe sound a bit like what was happening to the movies I was recoding. I would use the AVI file (generally from KaZaa, although the new Morpheus is seemingly just as good and a lot prettier!)
Anyway I would take a avi movie download, use Virtual Dub to make a .WAV file of the film's audio, use TMPG to encode the file as a.MPG file. I would use the original .AVI file for the video source and the .WAV file for the audio source. The resulting MPG file usually runs over 1 gigabyte, so you need to use TMPG's MPEG tools to edit the whole file into a series of smaller ones.
Now this is the point where I screwed up every day for almost 3 months. I never changed the setting in the "CUT and Merge" box of TMPG tools. I always left it in the "standard" setting, instead of the proper VCD setting.When I would put the CD-R into my DVD player the video and audio always seemed mismatched. A woman's lips would be moving, but a man's voice frfom either the scene before or the scene after, would be heard.
Now that I know to reset the settings of the Cut and Merge tool my audio and video are in perfect sync! (Thanks to the guys on this BBS!!!)

That's not it, because even if I don't have to cut the mpeg into smaller ones it still happens. It doesnt start with the audio out of sync, it happens while I'm watching. All of a sudden it looks like someone pressed fast forward but the audio doesn't go fast so they are out of sync for either a few seconds or a few minutes and then the video goes really slow and catches up. It keeps happening at various points throughout the video. The wierd part about it is that it happens in the same spot every time, even if I re-encode the video it still happens in the same spots that it did before. Do you think it could be because of some kind of copyright protection encoded in the AVI file?

IS there any program i can use to dvd author a VCD without using quality of having to use that ulead program with a plugin

If your files at totally VCD compliant then there are lots of them "VCDEasy, Ulead dvd workshop, "Video wave 5" Vidio Pack" Win producer" and the list goes on......

minion, i am very bad at this dvd thing please explain it an the easiest way possible how is a VCD totally compliant and how can i check please explain it step by step. these programs are just like movies i download then convert and now i want to add like chapters and menus to make it look professional

Jake take a vist to VCDHELP.COM This has a Step By Step on how to do vcd as minion says there is a lot of differnt programs u can use if u dont have a lot of HD space u can opt for DVDX ver 2.0 (a few bugs) or DvDX 1.8a as thay rip and encode from the source ...

If u r very new 2 this then opt 4 VCDeasy and it is a all in 1 ...

hope this helps u out

TMPEG is being temperamental.. it used to encode long MPEGs and doesnÃÕ! The largest file it will now accept (.avi) is of arounf mins 40secs or soEWhy ???

What type of error are you getting??????

high, i have the same problem, it just stops encoding an mpeg2-file and hangs up

Here goes an obvious easy question to answer- Does this tmpgenc allow to transfer avi files( mostly downloaded movies from the net ) to a readable format for my dvd player. I used to get movies in this format from someone I used to work withm, so I know my player can read them. However, I have been looking for the proper program for a long time. HELP.
PLS send email as I do not go to the qweb sites often looking for answers to questions.

Stephen stille5679@rogers.com

Taking AVI files and transforming them to MPG files that can be burned to a VCD is what TMPG does best. For a quick tutorial go to VCDHELP.COM. If you find you need help with the basic terminology go to: www.lukesvideo.com/
If you are just starting out I would first assemble a collection of avi files that you want to transform (you get them from KaZaa or something similar, correct?) and when you have a few, download the free versions of TMPG encoder, and Nero Burner. (http://www.ahead.de/en/
Now you have the 2 principal pieces of software tools, and your files. One other thing you need... about 100 CD-Rs. Because the guys on this board can point you in the right direction, and can answer specific questions, but really, there is a lot to learn before you can consistently turn out a good product. Buy the CD-rs in bulk and that way if you have to toss out 4 or 5 cause the picture jumps or the audio isn't in sync it won't hurt so much!
In the beginning use "the Wizard" for both of the programs... later on you can start getting fancy.
Oh, and after you do make a TMPG MPG and go to burn it with NERO, you may find that you often get amessage that your video file has problems and that Nero would be happy to re-encode it. To this, just say no... and then hit the burn button.
At this point you will have gotten one foot in the water...

What a helpful post !
Thanks for taking the time out to post.

When I convert from avi to mpg and then burn onto a vcd the quality isnt all that good (I'm converting to PAL 252x288, 24fps the original fps was approx 14, is this the problem?) before conversion it was almost perfect. The particular problem I am getting is the transition from frame to frame is not smooth when played on my dvd. I have had to increase the priority of the direct show settings in order to convert the files. Can this affect the smoothness? Or is their something else I can do? Can anyone help me?

Your problem is the framerate conversion. TMPG does not do proper framerate conversion and in any case 24 fps is not the correct framerate for PAL.
There is a guide in the pages somewhere in this BBS that gives a step by step conversion and how to do it correctly.

Try searching using key words such as frame rate and conversion.

ASHY

Hi
I don't know if this really adresses your problem... For the first 2 months of using TMPG I thought my final product had to be in NTSC format to run on my DVD player (I live in USA). When I saw that a AVI file was in the Pal format I would tell TMPG to encode it in the NTSC format. The result was a lot of jumpy films. Either Ashy or Minion told me to encode to the same format as the original source file and then burn to CD-R. I did that and now my films do not jump. My Panasonic DVD player apparently doesn't care if the format is PAL or NTSC.

That is what I do and I don"t have a problem at all playing Pal movies on my Ntsc Tv, But I guess some poeple do.....

I have a PAL TV which Im sure can handle NTSC.
How can I tell if my DVD player will ?

...I have checked www.vcdhelp.com ...I suppose there's only one way to find out ...try ;)

are there any dvd authoring programs that wont encode the VCD regardless, except for the ulead program were u need the plug in

Yes ,VCDEasy, Nero....

so if i use VCDeasy, i use dvd authoring with that? will it mess up the graphics on not totally compliant VCDs

I don"t really understand what you mean by Graphics and dvd authoring, if you are doing VCD"s then there is no DVD authoring going on..VCD easy will burn your VCD if it is standard or NON-Standard, but if it is non-standard make sure the the "vcd compliance" box is not checked...It will not re-encode your file. and it couldn"t if it wanted to cuz it doesn"t have a mpeg encoder...Nero will burn your XVCD without re-encodeing it, you just have to burn it as a "NON-Standard" VCD......

is there a plugin?

You need the "Subtitle plugin" for "Virtual Dub" then frame serve the file to tmpgenc....

Trying to convert the second part of a divx-file to vcd I get the error message "352 352" at 84%. What does this mean and can I make any changes to prevent this error?
Thanks in advance

Maxx

Hi

well, I don't know the meaning of this error msg, but I had a few days before the similar situation - I tried to get a divx converted to a VCD (or mpg). And I had another error msg.

What I did was the following: I downloaded the SW so called VIRTUALDUB from doom9.org and just started it. I opened the divx-avi file, set within the video and also the audio menu the settings to >direct stream copy< and then just saved the project as AVI file again.

I started TMPGEnc as usual, opened now my new AVI-file and ran through the same process - and this time without any error. It just did it like I expected it from the beginning.

Just go and try it and let me know.

Have fun:-)
Kai