This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
After I encode from avi to mpeg1 or mpeg2 using TMPGEnc it plays on Windows Media Player but when I try to play it on WinDVD I get the sound but the screen is completely pink. I have heard about the angel codec but how do I find out if it is on my system.
You mean you don't know yourself whether you installed it or not?
What operating system are you using I will tell you where to look or if want you could just have a look using TMPG.
Just click File>Output to file>AVI file then click the 'setting' button on the right near the video field. A video compression box will pop up. You should be able to see a list of the codecs on your system in the drop down menu.
I checked as Ashy suggested and I don't have the angel codec installed. What else could cause this? I am using Windows 98SE with Premiere, exporting as AVI and as I said after encoding the MPEG File plays in Windows Media Player. I can play AVI files on Win DVD but the MPEG files are completely pink with normal sound.
I made 2 SVCD images to burn using VCDxBuild. The first BIN burned just fine but the second one was just a touch too long to burn on an 80-min CDR. I wanted to cut the file down by 30 seconds, but I had already deleted the original MPG file. I downloaded WinISO to extract the MPG from the BIN file but TMPGEnc (which I used to make the original MPG) says the extracted MPG is not a valid MPEG file. Is this a problem with WinISO? What can I do to extract a valid MPEG from that BIN file and use TMPGEnc to cut off the end?
I found that VCDEasy will burn only at 1x speed on my burner without causing errors. I use CDRWin 4.0 which works wonderfully, but my burner reports "Won't accept CUE sheet." I'll try VCDEasy, thanks.
I use VcdGear to extract SVCD from BIN files, I have tried CDmage, but it always errors out. You are correct about WINISO, it doesn't produce a valid mpeg layer for some reason. Typically after getting a mpeg out of VCDGear I will use a custom template in TMPGenc to make a XSVCD, that way I can make it fit either way, more or less onto a 80min CDR. You have to create and save your unlocked template so that you can make changes to those settings that are normally ghosted out. I am not sure if I am getting reduced bitrates from VCDGear from what it should be, but by the time I get done using TMPGenc I get goods video.
I downloaded NERO and ran an OVERBURN test. It said I could only overburn 1:05 with that disc (but it only worked in RAW mode). The BIN file is 80:33, but when I ran the overburn it couldn't write the lead out track. I tried this twice. I use an HP CD-Writer 9100. Is this a problem with my writer or is there another brand of media that overburn better? I use Verbatim 80min. Thanks
It seems like you've got a dodgy writer. I've heard many a story about problems with HP writers. I don't think it's the Verbatim disks as they usually overburn quite well. I have had 830mb from Verbatim.
You could use ISO buster to extract the MPEG and then try overburning with NERO.
Nero will allow you to set the amount of overburn you wish in the preferences.
Next time I would do a simulation first rather than waste a disk.
I am having audio sync problems after joining mpeg files encoded using TMPGEnc.
Problems.
at each join-point; video pauses for fraction of second; audio continues
my software-DVD player on computer crashes at end of video;
I see that in some scenes, audio follows/behind video by fraction of second.
below steps I followed.
1. Added text to DV-AVI(NTSC?) files and encoded in
DV -AVI-(NTST?) format using VideoWave
-- each piece is about 6-10 minutes; I have limited disk space
2. Encoded each piece to PAL-VCD using TMPGEnc; highest quality;
de-interlace-odd-adaptation; crop-left2-bottom-8;
fullscreen-arrange-keep-aspect ratio2
3. So I get about 10-11 separate mpg files.
4. I combine all mpeg files using TMPGEnc cut/merge tool
unger File->MPEG tools
5. Then I burn my VCD using VCDEasy1.1.1
-- i see some warning saying its okey TMPGEnc signature n times
if i combined n files! and couple of APS warnings
6. I see that when I play the mpeg, after each piece (where it was joined)
video pauses for some time; audio still continues;
and (my software DVD player crashes at the end of the video)
stand alone dvd player-samsung is okey.
This is just a thought but your sync problems could be related to the fact that you are encodeing a "ntsc" file to "pal", the frame rate change between "ntsc" and "pal" would make your audio and video go out of sync..The easy way to fix this is to encode your ntsc avi to ntsc mpeg...but Ashy is the pro when it comes to "ntsc to pal" conversions....
my mpegs look like crap! can i get the flow of the movie as a whole to look better with this program? the movement looks as if the the movie is still being watched on the computor when i burn it onto a vcd. the detail is only good on a scene if nothing is moving. i tried the motion setting and even if i followed through i can justify 33hours for half a movie. is there another way? please help!
Tell us what you are doing so we can tell you what to do differently..The best way to increase quality is to raise the bitrate, the standard vcd template has a bitrate that isn"t going to give you the best quality but it is the standard bitrate for vcd, load the "unlock.mfc" template, then you can change the settings....You said it takes 33 hours to encode half a movie?What are you running a 133mhz?You odviously need a faster cpu,you can get a p4 2.0ghz for $750 in the states and that is the cheapest I have ever seem a cpu that fast..
"..The best way to increase quality is to raise the bitrate,"
Is it really that simple? I am not a programmer nor an video professional. I know that with digital cameras, the greater the number of pixels, the better the picture. Are you saying that the same thing applies with "bitrate"? Does the higher bitrate advice apply to the original filming "capturing"?? of the image or movie, or does it apply to the encoding part, or to both? Can you take a standard avi file of a tv show and improve the quality of the picture by encoding it at a higher bitrate?
I went to the MPEG setting screen of the TMPG encoder and tried to raise the bitrates... seems impossible to change the default. How do I unlock this? Finally... is there any 1 or 2 hard copy books or online tutorial sites that you can reccommend so that I can teach myself some of the basics and not drive you guys nuts?
You really can"t make the quality of your mpeg better than the avi that was the source,mpeg is for video compression not a video enhancement,yes it would be better to use a higher bitrate while captureing that will give you a better result..The higher the bitrate the more the encoded or captured file will look like the original,but you cant really make it look better than the original, you can apply filters and such to clean up the file but to make it actually better is a long shot.Go to "www.vcdhelp.com" they have lots of info on mpeg and captureing and vcd"s and stuff like that,it is a veritable fountain of information.....To change the "bitrate " you have to load the "unlock.mfc" template in the "extra" folder, this will unlock "ALL" the settings in "tmpgenc.
There a few reasons that your audio would not work ,the most common is that your audio track is of a format that is not supported by "tmpgenc",try extracting the audio to a "wav" file with "virtual dub" and use that as you audio source......
I cant get Tmpgenc to Frameserv with VirtualDUB. Ive gone up and down www.vcdhelp.com and still no results. Tmpgenc freezes everytime I try to frameserv to it, then I have to "ctrl+alt+del" to get out.
I've done everything installed the VFAPI pluggin so tmpgenc can accept *.vdr files, Set the enviromental settings, even tired differnt version of Tmpgenc v2.51- 2.54a and VirtualDub 1.4.7 -1.4.10 (installed frameserv handlers) all with no success. I believe Tmpgenc doesnt frameserv.
TMPG frameserves fine here, looks like you've tried everything it seems, so don't really know what the problem is.
Give this a go. Go to Options>enviromental setting>VFAPI plugin and uncheck everything except the 'AVI VFW compatibility reader' and raise it's priority to 2.
If that doesn't work maybe it's the movie itself that you are framserving. Have you tried to frameseve a different movie, maybe try just a small sample and see what happens, because I remember having a similar problem with a movie a long time ago and it was the movie not TMPG.
If not, what is it you are using Virtualdub to frameserve for? As I may have an alternative for you.
Another good way of testing whether the frameserver is working or not, is to start the frameserver and instead of trying to open the framserver file with TMPG, start up another instance of Virtualdub and try and open the framesever file with that.
If it works ok you know it's TMPG related. If it doesn't it means the frameserver isn't set up correctly.
I have a question about getting subtitles into my vcd movie.
I us virtual dub and tmpgenc tot add the subs. I use frameserver in v.dub and than create the movie with tmpgenc. Only if i do that i get some strange pink blur in the movie, and when i dont put subtitles in the movie the movie is normal. I know about the enviromental settings in Tmpgenc and how tot get the blur out of a movie, but i dont know how to get it out with subtitles.
This has been happening quite a bit lately. We use VirtualDub to separate the .wav file from the .avi. We then use TMPGENC and use the .avi as the video source, and the .wav as the audio source. We first see "creating temporal wave file" and it works through to 100%. TooLame then begins in a DOS window and we see the following: "Parsing wave file header, 44.1Hz sampling frequency selected, input file D:/...mpa_38.wav, ouptput file d:/...mpa_39.mpa. After a bit of processing we get "TooLame has generated errors; File d/...mpa_30.mpa can not be opened" and tmpgenc closes. Are we doing something wrong or is there just a problem with the film so we cannot convert it. We are trying to convert .avi to .mpg so we can create VCD's. Any ideas or suggestions?? Thanks in advance.....
It seems that there is either an error in your "wav" file or there is something wrong with "toolame", try useing a different audio encoder like "scmpx" ,or the default encoder that is built in "tmpgenc", When i have problems like this I sometimes use "db power amp" to encode the wav to "mp2" then multiplex the audio with the video..This is a long shot but try raising the priority of the "wav file reader" in the "vfapi plugins"
>This has been happening quite a bit lately. We use VirtualDub to separate the .wav file from the .avi. We then use TMPGENC and use the .avi as the video source, and the .wav as the audio source. We first see "creating temporal wave file" and it works through to 100%. TooLame then begins in a DOS window and we see the following: "Parsing wave file header, 44.1Hz sampling frequency selected, input file D:/...mpa_38.wav, ouptput file d:/...mpa_39.mpa. After a bit of processing we get "TooLame has generated errors; File d/...mpa_30.mpa can not be opened" and tmpgenc closes. Are we doing something wrong or is there just a problem with the film so we cannot convert it. We are trying to convert .avi to .mpg so we can create VCD's. Any ideas or suggestions?? Thanks in advance.....
Thought everybody may like to take a look at these very interesting templates which claim to able to fit 120 mins of high quality video on to an 80min cd.
I must say I have done a small test with these templates and the rsults are suprisingly good.
at the first impression the quality seems not that appealing. I tried around with the first minute of Starship Troopers which is rather bitrate intensive.
The best I can get with the templates is 11 MB/min for kvcd and 13MB/min for the kvcdx2 template. Since CQ is used in the Templates I also tried the kvcd template on an calm 1 minute scene which came out 9 MB/min. So even on an 90 Min CD-R this is 'only' 100 Minutes at max
Quality was subjectively worse than my encoding of the movie with 2Pass VBR 800/1350/1750 VCD and a test with CQ 800/1750 Quality 85 VCD
Btw.: I didnt change the templates to 2 Pass VBR since this only makes sense on long scenes or better full movies cause 2Pass will check the whole movie and then allocates the bitrate on that result. 2Pass VBR WILL force the average bitrate so if you use the source range to encode an short scene with lots of action the quality of that scene can be worse than encoding the whole movie.
Well, I have to do more tests when I get time but I recon the VBV buffer size needs a change with the new GOP structure, definitely for the kvcdx2 templates.
I forgot something to say. Since the movie was squashed I did my tests with Full Screen. While reading the Forum at kvcd.net I realized why I got so high MB/mins
Quote from kwag:
----
Full screen videos have more visible pixels than a wide screen 16:9 ( with black bars ).
That's why the file size is larger.
The templates work best with 16:9 videos.
With full screen, you might get 90 minutes or so in a 80 minute CD-R.
----
The test I did came out fine. Got around 6.5mb/min and the quality was fine. Not much evidence of blockiness. I preferred the kvcdx2 templates these seem to have the best quality regarding file size.
I think these templates are pretty good. I mean 2 hrs on one CD, thats quite an achievment and the quality is better than you would expect.
I gonna do some further tests with these templates and raise the bitrate to see what would happen with a shorter movie of say 90mins.
seems I got fooled by my Mpeg Player(xine) which maybe didnt like the GOP Structure.
I played it with another player on my Windows Box and burned it on CD-RW. The picture quality is very good. Unfortunately my Yamakawa 715 wont play mpeg1 streams with to high bitrates. The kvcdx2 sample was a mess on my player :(
With the kvcd I get some audio and video glitches here and there too *sigh*
>Thought everybody may like to take a look at these very interesting templates which claim to able to fit 120 mins of high quality video on to an 80min cd.
>
>I must say I have done a small test with these templates and the rsults are suprisingly good.
>
>Check 'em out here: http://www.kvcd.net
>
>ASHY
Thanks for trying it out Ashy.
I'm Glad you liked them! :)
Hello,
I would like to know if it is possible to command tmpgenc in windows whith dos command lines such scmpx for example(ex, to encode: c: mpgenc mpgenc -e 1000)
excuse me for my pitiful english, but I'm french
Hi,
I have a video in PAL (720x576) which I saved in order to clean in a graphic program, at 720x288 with 50fps (Using the 'Even-Odd field' deinterlace option).
It was great in making the progressive mpeg, but the problem is that I can't get the progressive 50fps back into interlaced 25fps. Anyone has any idea how one can do that?
Maybe your problem is that 25fps is pal and is progressive and you cant make 50fps interlaced into 25fps interlaced because 25fps is progressive or maybe you can but it don"t think it is consistant with pal specs,but you can turn a 25fps progressive into a 29.97 interlaced,but i could be totally wrong ,"Ashy" is the pro when it comes to "Pal" and changeing frame rates,all the stuff I do is interlaced.....
Was it really necessary to de-interlace before loading into your graphic program? It's not usually necessary to de-interlace PAL sources as you don't normally get the interlacing artifacts you see with NTSC sources.
How do you mean you can't return it to an interlaced 25 fps source? Simply encode to MPEG2 then change the framerate to 25 fps. If what you are saying is that you can't alter the settings then just click the 'unlock.mcf' template inside your templates folder and the settings will unlock.
Well, I needed it in order to use a special dirt removal from an old film. The thing is that they transfered it to PAL in 24fps, so every 12 freams or so, you have one frame repeating on 3 fields. So you have 12 frames that are normal, and then 13 freams that have interlace artifacts. Tried keeping it at 25fps and doing deinterlace of both fields, but then I'd have 12frames of good quality and 13 that are fuzzy.
Thing is, when I set it to 25fps, it simply takes every second frame off the 50fps, and doesn't combine the two progressive frames into one interlaced...
I see. I have had the misfortune of converting one of those movies too and they are a bitch to convert, even worse than NTSC movies. You just end up with a jerky movie no matter what you do to it. Either that or you put up with the interlacing artifacts, you just can win.
My problem: I want to convert SVCD in VCD. By my friend go this fine in this way:
Open MPEG Tools select Type: Video-CD and select Input-File (SVCD) and select output-file. It works by my friend.
Then I want to do the same on my computer. It runs to 50 or 60% then came the following requester: 246845 s packets cause buffer underflow. The MPEG file might cause error when it played. The size of the outputfile is also 50 oder 60% from the original-SVCD-file.
What is wrong?
Are you useing the "multiplex"?if you are try the "merge & cut" ,load your file in the "Merge & Cut"and choose the "mpeg1-video-cd"and your output file then click run.I will do the same thing as the multiplex(attach vcd headers)but shouldn"t give you "buffer under flow" errors...
No Errors!!! great!!! But could it be: the SVCD file is 730MB and the VCD ist 330MB.
My film have 3 SVCDs. If the result from all SVCD ist 330MB can I put two files on one VCD. Must I put together the files for my DVD-player? How?
you can merge the files in "merge and cut" and you can load the 2 parts as seperate tracks on your cd-r without joining them, that is wierd that the file shrunk so much when you used the merge and cut to put on the headers,there must have been lots of padding in the svcd file....