This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
Has anybody used the 2.54a new env. setting? If you choose to save the result from the first, how much faster to do a 2pass vbr compared to 2.53? thanks
Why are you useing "2.41" it is quite old, but your problem sounds like you need to raise your "direct show" plugin..Go to "options" to "enviromental settings" to "vfapi plugins" and raise the "direct show" plugin to "2" and lower every thing else to "0".....This should get your avi file loaded.......
Used TMPGEnc 2.54a to convert AVI file to MPG file (NTSC)
for DVD-R. I have a Pioneer DVD-R writer and want to
play MPG file created by TMPGEnc 2.54a for DVD playback on
my TV, using a DVD player purchased in China.
When I copy MPG file created by TMPGEnc 2.54a to
Pioneer DVD-RW/R Writer, MPG file writes OK, but
does not play on DVD connected to TV.
I know the DVD Writer and Player work because I have
copied numerous DVD's and they play fine.
Is there another step after creating an MPG file with
TMPGEnc I need to do before writing the DVD-R disk ?
If you have copied Numerous DVD"s and they play fine then do what you did when you burnt those numerous dvd"s, is this the first time that you have used Tmpgenc for encodeing your dvd"s?did you use a different encoder when you burnt your other dvd"s?If you have done numerous dvd"s and this one time you used Tmpgenc and it did not work then do what you did when they did work..
Realize this is a bit "off the subject", but wondering if some of the people here can recommend a decent DVD authoring package. I already have a "finished" DV video (Premiere / TMPGenc), but need to create DVD menu, chapter points, etc. Tried the MyDVD that came with my Pioneer 104, but it "transcodes" the mpeg2, and also cannot add chapter points.
Encoding for DVD, if I use CBR the resulting stream actually has a VBR. Even setting for VBR and setting Max/Avg/Min all the same still sees a VBR, with peaks going above the maximum setting, and mins dropping well below the Min setting. This is of course causing problems as setting say a maximum of 9000 CBR is seeing a VBR stream with peaks going about 10Mbits/sec causing problems on playback!
I've had many audio sync problems converting a 512x384 (4:3) NTSC 23.97 48000 DivX trailer to play on my PAL Sony NS-300 multi-region DVD player and Sony 4:3 TV in the UK.
First I demultiplex the file to a 44.1 WAV file and a video stream.
Then I encode a new file:
With fixed frame rate, 512x384 the picture is too far to the right. This is probably a DVD/TV problem.
With 23.97 frame rate, SuperVCD 480x512 (PAL) but mpeg1 format (2200kbps) the picture is good but the audio sync is wrong, seems to get worse.
I have tried many combinations of resolution, aspect ratio, frame rate. I have studied vcdhelp.com. The TV is multi-standard and plays all the different frame rates (NTSC/PAL) with a good picture. I use Nero to burn CD-RW disks.
You have done every thing right up to a certain point, but what you didn"t do is realize that your video stream is now shorter than your audio cuz you have sped up the movie by changeing the frame rate from 23.97 ntsc to 25 pal, now what you have to do is shrink your audio file..First extract the audio from your video file then find out the "Exact" length of your video file, now you will need a audio editing program like "cool edit" which has a function that will allow you to shrink(or stretch)your audio file to the exact same length as your video file, after you have done this you just you can multiplex your audio file and your video file together and then they should be in sync..There is a bit more to it that i wrote here but this is basicaly how you do it, you will need to experiment for a bit to get it right, but it"s better than never getting it done, if you have trouble figureing it out you can e-mail me ........good luck
Thanks I see your point. I don't think the sync problem is due to a 23.97/25 (95.88%) timing skew - over a 40 minute movie the sound is out by about a second or two. While we are on that point - are there any details about the TMPg frame rate conversion? I would expect it to interpolate between frames to keep the timing correct and the CPU time used supports that. If it simply output frames without any processing it would finish in a few minutes.
It seems more likely there are small jittor errors creeping in, either in the audio or video streams. Perhaps the extraction of the Divx MP3 audio track is not 100% accurate timewise...or the Divx codec that decodes the video frame by frame for TmpG it not entirely accurate.
I recall getting some "buffer underflow" errors from one of the conversion programs. At the time I just ignored them but if audio samples where lost that could explain the sync errors. I'll see if I can reproduce the problem.
Are there any test AVIs or MPGs anywhere? One showing time and an audio click every second could be calibrated with a clock.
Thanks I see your point. I don't think the sync problem is due to a 23.97/25 (95.88%) timing skew - over a 40 minute movie the sound is out by about a second or two. While we are on that point - are there any details about the TMPg frame rate conversion? I would expect it to interpolate between frames to keep the timing correct and the CPU time used supports that. If it simply output frames without any processing it would finish in a few minutes.
It seems more likely there are small jittor errors creeping in, either in the audio or video streams. Perhaps the extraction of the Divx MP3 audio track is not 100% accurate timewise...or the Divx codec that decodes the video frame by frame for TmpG it not entirely accurate.
I recall getting some "buffer underflow" errors from one of the conversion programs. At the time I just ignored them but if audio samples where lost that could explain the sync errors. I'll see if I can reproduce the problem.
Are there any test AVIs or MPGs anywhere? One showing time and an audio click every second could be calibrated with a clock.
Your post is VERY confusing to say the least.
On one hand you say you are creating a PAL SVCD, but then you say the framerate is 23.97 and the resolution is 480x512 and the format is MPEG1, so how can that be PAL SVCD? PAL SVCD is MPEG2 480x576 25 fps which is nothing like your specs.
One other point I'd like to ask is, does this happen on the PC as well as your DVD player?
I think TMPG probably does interpolate frames when you change the framerate, but this always results in jerky playback where the frame has been interpolated otherwise the length of the movie would change which doesn't happen.
I think that your sync probs are due to errors in either the video stream or audio stream as this only happens with certain files and I don't think it has anything to do with buffer underflow errors.
If the audio is gradually losing sync then I would follow Minion's suggestion and find the length of the streams separately and use Cooledit 2000 to adjust the audio stream accordingly or you could simply alter the framerate slightly using AVIframerate changer and speed up or slow down the video to match the audio.
Me again, I was having troubles before with tmpg not accepting the mpegs that i made using vcdgear. I was told to use isobuster to create them and this would solve my problem. I just got done creating another mpeg from bin and cue files using isobuster and tmpg still said that it was an illegal mpeg. What is the problem? I have uninstalled tmpg and re downloaded it and tried about every other method of converting. Now if there is an easier way to do what i am trying to do, im all ears. here is the scoop-
My dvd player doesnt support svcd so i use the tmpg to put a vcd header on the mpeg files that i create. This has worked for me 50 times in the past. Without any problems. Now all of the sudden every mpeg that i create no matter how i create them says illegal mpeg when i try to load it in the tmpg demultiplex or even the merge and cut. When i try to load them in isobuster it says some other error like pvc or somthing. I am in desperate need of help. Please send it. Thanks in advance.
Did you create these bin/cue files with that crap VCDgear. If you did this is the reason why you are still getting the error when you extract with ISO buster.
VCDgear alters something in the MPEG itself so no matter what program you use to extract it, it will still have the same problem with TMPG.
The way around your problem is to demultiplex the file with another program first such as DVMPEG or MPEG2VCR first. It should then open in TMPG ok.
Another solution to your problem is to not extract the MPEG from the bin file at all.
A program called Daemon tools to create a virtual drive. This allows you to open the image and use it as if it were already burned to a disk. You can then use TMPG to open the MPEG or DAT file directly from the image. http://www.daemon-tools.net/main800.htm
also 1 thing that i forgot to mention, Even the movies that i havent touched with vcdgear dont work on tmpgenc. So i am wondering if i have a setting wrong on it or if when i was installing those codecs if i might have installed some conflicting stuff??? just some ideas. But now that i have demultiplexed an mpeg, tmpg does accept the video part of it. But says that it is an illegal audio mpeg. and as far as your question as to where the original mpeg files are, I downloaded the rar files and extracted them to bin and cue using winrar. So i never have had the original mpeg files. I appreciate the help.
If you can get your video file in "tmpgenc" then your problem is solved, just encode the audio the a wav file with any audio encoder and load that in a your audio file.....
Sorry that should be. http://www.dbpoweramp.com
One other thing if you have trouble encoding the audio to a wav. It is most probably AC3.
For this you would have to use a program such as AC3DEC to decode the file to a wav.
got it converted to wav and it still says that it is an illegal audio stream. I am convinced that somthing major is messed up here. NOthing you throw at me seems to work. And like i said before, even files that i havent even touched with vcdgear wont load on tmpg so i think the problem lies deeper then we are looking. Any more ideas? Thanks.
What??? You've got to be kidding me. TMPG 'WONT' load the wav file.
There is definitely something amiss here. That should not happen.
Does it actually play with mediaplayer?
Was the wav encoded to 44.1khz 16 bit stereo?
As a test encode a music file such as an mp3 to a wav with dbpoweramp and try to load that as the audio in TMPG and see if you get the same error.
The only other advice to you is to completely remove TMPG from your system. Download the new version and re-install it.
Please Help!
I do not have a registered version of TMPG Enc, I downloaded it 21 days ago and it says I have 9 days left if I go to the "about" section.
I have version 2.54.37.135 and Core 1.87.133. Here is my problem:
I have 2 multiple CD SVCD's. I do not have a DVD player that plays them so I reencode them. This is a fine solution for me as I can re encode at roughly the same speed that it plays and I am a patient person. The first SVCD went fine, I re encoded the whole thing (5 CD's), burned it and enjoyed watching it on Friday.
However, I am now working on the second one and having terrible problems. The first CD re encoded fine. The second, the same. However, now working on the Third I have hit an absolute road block. I was re encoding and I got a BSOD. I restarted my machine and now TMPGEnc will *NOT* open the SVCD's Audio portion. It will open the video fine, and the MPEG does have audio, but for some reason it will no longer recognize it. This is the case in both partions of my WINXP and Win98.
I tried to see if it would open the previous CD's which I just re encoded hours ago. I get the same error. I obtained an ancient version of TMPGEnc from a website to see if it would open it. It does but by the audio it puts mux:. This is a much slower way of reencoding and I would really like to avoid it.
Does anyone have any idea how to fix this?
Also... if this is an issue that crops up every couple of days I apologize. I tried to use the search function on this forum but it is impossible to get anything related since it uses any of the words. Arg!
Feel free to remove the **nospam** and e-mail me or add me to ICQ.
Thanks for any help at all.
What you will have to do is just encode the video then you can "de-muliplex" the original mpeg and multiplex the audio with the encoded video..You said that you don"t have a dvd player that plays them(svcd"s) so you re-encode them, re-encode them to what?
I Re-Encode them to XVCD (I think). Basically the settings are MPEG-1 with a bitrate of 2500 which my player will play.
Thanks for the solution. It just bugs me that only hours ago I could easily do it without "de-multiplexing" and now suddenly I can't. It says the audio portion of the Mpeg's is unsupported. My question is how can that be if it was supported only hours ago?
Does TMPGEnc have an MPEG Audio codec that could be corrupted and that it would not fix when I tried re-installing it?
Actually, I think I fixed it.
I went into Options --> Environmental Settings --> VFAPI Plug In and I had 2 MPEG 2 Video plug ins. By unchecking one of them I solved my problem.
If your wondering it is the DVD Screener of LOTR. However I ran out of 80 minute CDR's and have to slice them up slightly so that it fits onto 5 CDR's. The movie is 3 hours long and is 4 80 minute SVCD's.
I use TotalRecorder to record the audio of .mov and save as 44.1khz, 16bits, wav format. And use TMPEG record .mov & .wav to a mpeg file.
It's normal while playing in PC, but after i burned it in cd-r with nero as vcd format. it only has "sa" sound came out, and i can't listen to the music & talk.
My mpeg file: 320*420, 25fps
but nero still said that "it's not standard format", my vcd format is not svcd, just vcd, so i carry on burning.
The standard frame size for vcd is 352 by 240 for ntsc or 352 by 288 for pal so 320 by 420 is NOT in the vcd specifications, so this is not a compliant vcd file, and what do you mean when you play it a "sa" sound came out? You did not load the standard "vcd template" or you probably would not have this problem , re-encode your file but use the "vcd template"..
My mpeg: PAL vcd
I can see the video on tv, only the sounds are terrible, just like it can't read the sound on that cd, the noise(sa..sa..sa) appear only while the music wave appear.
I save the wav as cd format by totalrecorder as i use quicktime to play it
image: www.4gigs.com/~sonic/1.jpg
And combine two video(.mov) & audio(.wav) in TMPEG
image: www.4gigs.com/~sonic/2.jpg
And there is part of my mpeg video burned on cd.
video: www.4gigs.com/~sonic/test.mpg
I have looked at your pics, but everything looks fine there.
The MPEG wouldn't download. Your hosting service said they don't allow that file type.
Anyway we need more info. Set up TMPG as if you were gonna encode then copy the information at the bottom of the main window and post it here.
It will look something like this -
MPEG-2 480x576 25fps CQ 65, Layer-2 44100Hz 224kbps
Still doesn't allow download. Streamload reports it isn't accesible to the public only for the owner.
You can stream it to my streamload account. Send to mark_ashworth1@hotmail.com
Hmm, I have downloaded the MPEG and it plays and sounds fine even though the quality is a bit low. It has all the right specs for VCD so I'm not sure what the problem is.
Does this file play fine on your PC?
Are you quite sure you chose the VCD option and not SVCD in NERO.
From looking at the MPEG I have downloaded it seems that you may not have used the right 'type' setting if you used the Merge&Cut feature to split your file.
When you cut the file you must make sure you choose 'MPEG1 Video CD' as the 'Type' from the drop down menu otherwise NERO will give you the compliance warning if you haven't done this.
To correct your file just run it through the 'simple multiplex' option in MPEG tools and choose 'MPEG1 Video CD' as the type then burn it with NERO. As long as NERO doesn't give any warnings it should work fine now.
Is there any different between "Multiplex" & "Merge & cut" to combine my video files? because i create the final mpeg file with "Merge&cut"( MPEG-1 system auto) every time.
Thank You, ASHY ^.^
After i change the type from MPEG-1 system to MPEG-1 VCD, the nero didn't pop up the window any more. And the sound is normal while playing in hi-fi.
thanks ASHY
I still have one question, i merge the mpeg files, but there's a "bit" sound while playing from one mpeg to other which that already merged into 1 file. Can it be prevented?
This little chirp or beep in the sound is caused by incorrectly joining 2 MPEGs at the wrong point in a GOP.
If you click the 'correct' button before merging this usually prevents it.
If it doesn't the only other way around it is to move the merge a few frames at either the end of the first MPEG or at the beginning of the second MPEG. As to which one is down to trial and error. You'll hardly notice this as it's only a few frames, but may get a slight jerk at the joined point.