I have an divx file that is just under 700 MB and the video is 52 min long, The wizzard shows that i should beable to fit that lenthg of a video on cd but after i converted the file it was twice as big as it was before, any help?

There is also no sound when i watch the video.

mpeg files don't compress as much as divx movies do, so a 700mb divx file might come out to be 900mb mpeg. Just remember that mpeg files take very lil cpu power, unlike divx files, which take considerably more because of the greater compression. This can be visibly seen on slower comps (under pII).

If my source AVI has a very low volume, is there a way to make the sound louder when encoding to MPEG-1? Thanks.

In the audio tab under settings at the bottom there is a section called audio edit click the setting tab next to it and there you can raise the volume....

I have been using TMPGEnc and TMPGEnc Plus for a couple months now with no problems until yesterday. I have encoded a bunch of avi's to Mpeg1 and Mpeg2 but yesterday I kept recieving an error that my avi's couldn't be opened or were unsupported. So I figured it was just the avi I was trying to encode. But now it seems like every avi I try to encode or even some avi's I have encoded before cannot be opened or are unsupported. It does however open and can still encode Mpeg1 files I have. What's going on? Why all of a sudden is this happening? I read some of the other people's posts and the replies to how to fix this but when I changed the environmental settings and direct show to 2 and the rest to 0 nothing happened. I still end up with the .avi being unsupported. I even tried doing different random high and low prioraties with all the objects in the environmental settings and nothing seems to work. Is this a bug for the versions of TMPGEnc 2.53.35.130 and TMPGEnc Plus 2.53.35.130? Thanks for any help.

Re-install your DiVx codec then go into your TMPEG folder and delete this file 'CurrentCfg.tpr'
Then try again.

ASHY

Ashy, you are a life saver. Thank you very much.

I am using Studio av 7 latest version in win2K. Capture card is a DC10+.
The problem I have is that I capture my AVI fine but Tempeng says that cannot open or unsupported file. I have tried to change the priorty in environment setting but to no avail. I was using this setup on the previous version of drivers for the DC10+ and it was working fine.
I have tried to fix by reinstalling windows an taking off all other programs but still does not like the mjpeg files.

any thoughts

vincent

I am getting audio fine, but the video is coming out black. I have the latest codec installed, and smr patch, any ideas? It was working fine until i goofed and had to reload window xp and the program.

I too am having the same problem. Anyone else having these problems? I am running Windows XP Pro and have only DivX 4 installed.

Actually I found the answer later on. I had v5 of DivX installed and found that it is not compatible with tmpgenc.

I goto file->output file->avi
then I click on the semi hidden button to select which codec is to be used instead of the default no compression. My question is, why can't I see my codec in this list, the codec in question is the divx5 codec (doesn't really matter, it could have been any codec). If I use VirtualDub I can see the codec and use it and it works fine. I also have TMPGEnc installed on 2 other comps and I CAN see the codec in it. Does anyone know how to remidy this problem?

I never know that "tmpgenc" had a codec option ,after useing this program for quite some time I have never heard of what you are talking about,but maybe someone else does.....

goto file->output file->avi
there u will get a new windows
u will see that a codec has allready been picked (no compression) and below it there is an audio codec.
well if u look carefully u will see that right next to the codec mini window there is button that has been almost covered up, it is to the right
If u look carefully and click on it u will see the codec menu

Can't understand why it wouldn't show up in TMPG if it does in Virtualdub.
Have you tried to remove it and then re-install the codec to re-register it with windows. Does it show any other codecs.
Also try and delete the 'CurrentCfg.tpr' file in your TMPG folder or maybe download a fresh copy of TMPG.

ASHY

What?
donjuan80 I thought he'd already said that. Read the question again bud.

ASHY

goto file->output file->avi
there u will get a new windows
u will see that a codec has allready been picked (no compression) and below it there is an audio codec.
well if u look carefully u will see that right next to the codec mini window there is button that has been almost covered up, it is to the right
If u look carefully and click on it u will see the codec menu

Sorry donjuan80.
I just realised you were answering minion for a minute there I thought you were answering your own question. Got me a bit confused there....duh.

ASHY

goto file->output file->avi
there u will get a new windows
u will see that a codec has allready been picked (no compression) and below it there is an audio codec.
well if u look carefully u will see that right next to the codec mini window there is button that has been almost covered up, it is to the right
If u look carefully and click on it u will see the codec menu

I had this problem when trying to output 720x480 format to AVI. Recapturing at 640x480 caused the desired codec to appear in the selection list.

I had no problems so far using the program, it works great!
Only I downloaded a (probably DivX) hughe file 840Mb and Tmpg blocked at 25% of the movie. To fix the problem I then spended 8 hours to convert the file to a Mov file with a Sorensen Codex to hold the filesize low, and it retuns to be a file of 3.2 Giga. All works great and the quality is still DVDlike.
Most of the new movietrailers are using this Sorensen Compression and it works fine when using Tmpg.
So my question is, what is the problem, the filesize? Is there a limit by the way? Or should I use another compression, or maybe avoid MOV files?
Thanks for your replies.

I just noticed that I forgot to mention that of course I can get Tmpg to work with this MOV file. So again, why?
Thanks

I have an problem with cut mpeg2 files.
the source is mpeg2 352*288 2560000bit video const.bitrate 44.1khz audio.
I will cut from the file (45min) about 5 min.
on video is all ok, but the audio is no longer synchron. he is about 1-2 sec
to slow on end of the new 40 min mpeg.

what is wrong ??

Thanks in advance

I want to use Cinema Craft 2.5 with TMP and would like to know what steps should be taken to do so and what would be the optimal audio/video setting would ensure top-notch quality

Thanks in advance

Well this is too general question, but there might be some info at:
www.vcdhelp.com

I think if you purchased CCE, that is good enough encode movies.

what is CCE...Is it different than TMPGEnc?

> what is CCE...Is it different than TMPGEnc?

This is easy to search over the net BEFORE posting.
Look for "Cinema Craft Encoder" on the net, you will find that easily

I purchased tmpgenc, have a serial number, downloaded it fine, etc. HOWEVER, as I read through this bulletin board about different settings, I notice I am unable to set some of them because they are "grayed out" and won't allow me to. Some settings I can't set are audio bitrate, dct component precision, vbv buffer,etc. Can anyone help me out with this! Still stuck in remote Alaska with no good movies!

Well, if you have purchased "TMPGEnc Plus", You can send question by E-mail to support section of Pegasys Inc.

I guess you just need "unlock.mcf" or you are stack on MPEG-1.
MPEG-1 has fewer option than MPEG-2.

For more info of "unlock.mcf", type unlock.mcf in the box at the top of this BBS, and press "Search", then you will find answer.

There are lots of information you can search on this BBS before you post.

hmm. . .well, I HAVE contacted pegasys twice in the last two weeks and received no reply; I HAVE searched the bulletin board a few times but have not found my specific question. I tried searching again using unlock.mcf in the search box and only got this posting and response. I DO have the unlock.mcf file located within the template/extra folder of my tmpgnec program. I was hoping that someone else out there maybe has another suggestion? thank you.

The reason why you can't select the options her are because you are probably trying to encode an to an MPEG1 file.
Some of these options aren't really relevant to MPEG1 and are only relevant to MPEG2 and is why they are greyed out.

To select these options you must choose an Mpeg2 template and then unlock it or select whichever template you want then unlock it and then under the 'Video tab' in settings change the Video stream type to MPEG-2 Video. You will then be able to select the options. You shouldn't have any problem changing the audio bitrate though in either MPEG1 or MPEG2 when you have 'unlocked' the settings.

ASHY

Sorry about the typos. I need to go to bed.

ASHY

thanks ashy!

I got it fixed. I was understanding the differences between mpeg1 and mpeg2 and all that, but NOT really understanding how the template thing worked. I have only been at this about 3-4 weeks and have already downloaded, encoded and burned onto cd's about 22 movies of respectable quality. I can tell the quality is going to get even better!

I have been trying to learn by reading and printing tips from the bulletin board and notice that you have some really good ones--thanks alot!:)

I have been burning VCD 2.0 until three days ago with Nero 5.5.7
Suddenly, burned CDs are not recognized (NO DISK) in my Mustek/Yukay player.
What happened?

if you can play the file on your computer,then the problem is with "nero"....

I recommend you to check CD-R disk you use.

BTW, this question is not related to TMPGEnc, so you may need to visit other place.

I had the same problem with Nero. Nero v5.5.7.2 worked fine. Upgraded to 5.5.8.0 and by Hitecker Ad600a would not recognise the SVCD disk. Went back to 5.5.7.2 and all ok. So, did you upgrade Nero by any chance? - and yes I agree with the previous posting - the wrong BBS

Ok here is the message I get: "755035s packets cause buffer underflow. The MPEG file might cause error when it played"

Why does this occur? I have rebooted. I'm on XP and have memory free. Please help. Thanx!

forgot to mention: this happens when I do a "Simple Multiplex"

If you get that many packets to under flow,it means there isn"t enough information to fill the vbv buffer,there is a good post 1 page back by "Ashy" that explains the vbv buffer,all I can sugest is to lower your vbv buffer size..

if it happens at multiplex just ignore it and burn it and see if it works if it doesn"t try what i said above but it happens to me when multiplexing but it usualy works ....

thanx for the help but where do I change: vbv buffer size ?