I have some problem with my encoded movies etc., sources are TS files and UYVY files (from VHS-rip), the source is in synch, but after i re-endoded to ect. MKV, MPG (DVD), Blu-Ray are the audio about -200ms and with the UYVY is +100ms, is most when i use Dolby Digital the problem cames, both ind 2.0, 5.1, but also a little bit with Mpeg-1 layer 2 audio, is there others with same problem, is there a new audio codecs or drivers there can uses with TMPGEnc.

The reason is slightly damaged recorded source files, which when coded in to other formats causes the audio to get out of sync. I have encountered this problem several times regarding recorded TS files on my PVR.
Such files needs to be repaired before usage in video editors.
What i use for this is VideoReDo TV Suite. It is a darn good video repair tool, who fixes the errors, so the risk of sync problems gets removed.

I how ever do NOT suggest using VideoReDo's converter tool, it sucks big time. Output the video as TS files.

Hi folks,

I am currently evaluating TVMW5 for encoding HD .m2ts footage to x264 mp4 format.
My problem is that TVMW5 does not seem to import my m2ts files correctly.
When I import m2ts files "as is" I end up with the audio channel only with no video track.
When I import m2ts using the TS importer I get the error: "Could not find any valid video titles in the TS file"!

My m2ts files are:Video AVC 1440x1080, Audio AAC 18kHz
My OS is Windows 7 (I tried on both 32 and 64 bits flavor -> same problem)

What is most surprising is that all other software I tried; VLC, xmedia recode and even TmpGenc TSMR4 can load those m2ts really fine.
It is rather frustrating that I can't seem to use TvMW5 on my file.

Is this a known limitation?

Thanks for any help on the matter,

Best,

Theo

I had this problem as well. One way round it was to leave a PGS (subtitle) stream in the .m2ts file then everything was fine. Removing all the PGS streams seemed to cause the problem.

I just tried importing my m2ts footage using the latest TVMW5 build (5.3.3.95) and I'm glad to report that it now works very fine. Thanks for the fix.

best,

Theo

The latest Feb. 2013 version now smart renders hauppauge hdpvr 1212 videos! This fixes the only serious, for me, shortcoming. I've experimented wirh clips from lots of different sources -- canon, gopro, ios mp4, hdpvr 1212, and others -- and tney all smart render.

I also tried the new Commercial Candidates feature, but it didn't detect any commercials that were present on a video. But, having this feature added is a plus which will hopefully be developed further.

The hauppauge hdpvr 1212 videos do not meet the Blu ray standards in regards to GOP structure. 720P videos will smart render 1080i videos will not.

This statement only applies to Blu ray standard videos. It will smart render MP4 mkv standard video files from the hauppauge hdpvr 1212. I tested all driver versions capturing 30 second 720p and 1080i. The hdpvr2 is worse in some regards if you are thinking of upgrading. the vbv flag is set to no, the bit rate does not meet the standand for some settings, along with the GOP issue.

Another area of concern is the MBAFF flag. It is coded non MBAFF/MBAFF for 1080i. It should be coded just MBAFF for interlaced.

Hello,

When I set up more than seven mask layers TMW doesn't let me select end edit the ones below 7 seven.
When I select 8 or 9 the selection always jumps back to 7.
7 is the number that is still visible without scrolling down.

Win7 64 bit
TVMW 5.3.1.85
1280x1024 screen resolution

Regards
Philipp

I've tried doing a Repair Install but doesn't help. When I add clips I keep getting this error - Loading error UtilsDirectX. Tried different clips, not specific clip related.

Using trial version. So can't save. Adding 16 clips. Extremely frustrating.

DirectX error, not TAW5's fault. Download and install the latest version of DirectX from Microsoft's homepage.
http://www.microsoft.com/en-us/download/details.aspx?id=35

I load a video as a background but, when I go to simulate, the video does not play No problem with stills but, video should play? Video formats, m2ts, avi mpg. None work. I am asking for something the software cannot do?
Motion should be possible

Isn't there a 'motion' button? I see one on AW-5 when I'm in simulation mode. You click on it, and it takes a while to start, which is a pain. I asked help about it, and they said that they'd work on improving it so the motion would start at the same time as sound and not make you click motion every time.

Be sure to also activate motion menus in the Global DVD/Blu-ray settings in the Menu Stage.

I do a lot of VHS to DVD. If needed after capture, I make sure the files are VCD compliant. Then put them on DVD, leaving them as VCD as I get so much more on the disk, and there is not much point in converting to MPEG2.

With TAW4 I had no problems. With TAW5 it wants to convert them to MPEG2 at 2000kbs.

I assume that Pegasys, in their wisdom, have decided that in TAW5, MPEG1 can't stay that way. Fixing something when it ain't broke.

In Preferences->Project default settings->DVD-video settings I can force it to use MP2 for the audio. But can't find a way to force video to MPEG1 CBR 1150.

Is there not possible to do this, or have I just not found it?

Suddenly it has decided to use smart-rendering for MPEG1 video. Don't know what changed.

Bought it yesterday and i it poped up a dialog that it wanted to dissable AV software during install or req a reboot after install, witch i found a bit odd sence this is the first software that ive installed asking this.
Any ideas why? compabillity problems?

Probably because it wants to communicate with the validation server to validate your license. Some AV software think it's a virus or something.

I have purchased MPEG Smart Renderer 4, based on the claims of reduced/minimized re-encoding of edited files, in order to be able to cut the start & end of some video files I have.

These files can have a few "dead" seconds at the start and/or the end of each. Removing this "dead time" should not result in re-encoding the whole file, since I'm not touching the rest of the videos.

So, after buying MPEG Smart Renderer 4, I import this one .mkv file, cut the "dead time" in the edit window... only to see that the clip is not of type "master" but "rescue". When I try to proceed from the "source" to the "format" tab, the programme keeps complaining I need to have a Master Clip before it can proceed to the next tab: problem is, I cannot set the one and only clip as Master Clip. Nor can I find an option to "import a master clip".

So I'm stuck. The help files are not that helpful and I cannot find any documentation about such a situation.

Help?

What is the video stream format? In order for it to be smart renderable (or set as a master clip), it has to be MPEG-1/2, MPEG-4 AVC. MKV is just a container format, so the video stream can be anything. Check the file with a program like MediaInfo.

Hi, I use TMPGencAuthoringWorks 4
I have built a menu with 4 button. Each button links a page which contains from 3 to 6 clips. When I push a button, correctly goes to the page. Than I click the clip thumbnail and the clips starts. This is OK. The trouble is that at the end of the clips starts the next clip of the page, instead of stopping and showing again the page with the clips and I don't know where I can set the "no transition".

Thanks in advance

Mino

Since your clips are all in the same track, they will play one after the other as if the entire track was one movie. You will need to put each clip in a separate track if you want to go back to the menu after playback ends.

In TAW5, there is an option to go back to the menu after a chapter ends, but this feature is not in TAW4.

Thanks for you answer but I have another question.

As I have explained before I have a main menu with some button that
links to some submenus. ( Simply each button in the main menu
show an year and each submenu contains all clips of that year ).

Every submenus have 2, 3, 4, or 5 clips that can be started with a button.
I cannot understand where I can set a different number of button for each submenus.

For example : year 1984 contain 1 clip, 1985 contain 5 clip, 1986 contains 5 clip.
When I choose the menu with 4 button the program inserts 4 + 4 + 3 button but
this is not what i like since I want to insert a button for each clip in different submenu.
Sorry, for my long question and for my poor english.
I hope I was clear enough

Mino

Hey Guys,

I´ve got a bad problem with my encoded videos from TMPEG.
When I play this video with VLC the video stops at a time of 40 seconds.
If i set an other time to play this video (maybe one an a half minute) it runs normally till end.

There is a time between this two times where I can´t play this video. If I switch between this time VLC will start the video again from 00:00.

That problem often occurs.
What causes that?
What can I do so that does not occurs again?

Your Svaartberg

How to Diagnose DVD Burner Problems

DVD burning allows users to store data, create home movies and share discs like never before. They hold more then triple the amount of a CD disc and have only expanded in use since their introduction. The DVD may be useless to you, though, if you have DVD burning problems, and the whole stack of blank DVDs you own could become nothing but coasters if you do not troubleshoot the problem.

Instructions

1

Make sure you are using a DVD burner. Some computers are only equipped with CD-RW burner or a DVD-Rom drive, so DVD discs will not be able play in them at all. DVD-Rom drives only read DVDs--they do not write them.
2

Check to see if your drive is compatible with the blank DVD discs that you are using. DVD discs are either DVD- or DVD+ and this could be a huge problem when you are trying to load the DVD. The front of your drive has a DVD+RW, a DVD-RW or a DVD+-RW symbol on it that represents what discs are accepted.
3

Select the proper drive when burning the DVD. DVD-burning software should automatically select the right burner, but in some cases it might select another disc drive on the computer or the hard drive itself.
4

Check to see if the DVD disc you are burning is blank. Sometimes burned discs may become mixed up with blank discs and you may have inserted the wrong one into your drive. The best way to avoid this is by labeling all of your DVDs when you have completed the burning process.
5

Change the speed of the project. Some DVDs may mess up if you are burning them too fast; a slower burn rate will give you better results and run more compatibly with multiple DVD drives.
6

Update the firmware on your DVD burner. Outdated firmware could cause your burner to malfunction. Find the type of DVD drive by going to the "Devices" section in the "Control Panel," and then search for the newest firmware on the manufacturer's official website.
7

Try multiple discs. So many blank DVD discs are processed at factories that there is a chance that you may come across a dud or two. If the process fails the first time, try another disc, and if it does not work then try to eliminate other potential problems one by one.