This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
There are many popups in tmpgenc that cannot be disabled. Please add option to for every popup to be disabled.
Examples:
Closing main applications always asks:
"Project is not saved. Save?"
Removing clip from "edit" tab asks:
"You are about to delete clip. Are you sure?"
Removing job from batch window asks:
"Removes the selected batch processing. Do you want?"
For people who use your program often, it's very very annoying having to click on these popups all the time. Please add checkbox option to each box to not ask again.
TMPGEnc Video Mastering Works 5 seems to have a memory leak in that the longer it runs on Windows-7 64-bit the more Windows handles it consumes growing without bounds.
Is this a recognized issue by Pegasys and secondly, if it is are then plans to release a patch?
If not, how can I get my TMPGEnc v4 license re-enabled as t his version did not exhibit the problem.
No major drama - finally found the answer in DVD-Videoglobal menu settings under Item Display. Only wanted to put in a "To be continued on Disc 2" notation on screen.
For "formats" there is option to save custom template profile. The problem is that there should be an option for video resolution and video framerate to use original video specification.
A user may want to save other settings but keep original resolution and frame rate for conversion. The way it is right now, if user selects custom saved profile, they have to manually set resolution every time.
The built in templates such as "mpeg file output" or "avi file output" already have this feature and will use original resolution. Please add option so that save custom templates also have that feature.
Is there any way that I can enter a custom FPS in video encoding section. I have a video file which is 27 FPS and there no selection available for 27 FPS under any codec. Selecting any other FPS will causes audio video sync.
I have today tried to update my TMPGEnc MPEG Editor 3 to Version: 3.4.0.151. This resulted in an error of
Error 1402. Could not open key:
Unknown\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\0DC8CB51B56A0D742ADD098A4295F08A
VERIFY THAT YOU HAVE SUFFICENT ACCESS TO THAT KEY, OR CONTACT YOUR SUPPORT PERSONNEL.
I have tried turning off UAC and running the update. I have also tried system restore but the previous version 3.2.0.127 was broken. I then uninstalled this version and tried to install 3.2.0.127 but got the same error 1402. I am running Vista 64 bit with all updates.
Yes, that's the version I have.
Apparently the update doesn't do me any good, I tried to install WORKS 3.1.2.176 instead, and it's working just fine!
Is it still possible to buy this version?
There is a possibility that your drive isn't supported. I can't find that model on the official Sony Optiarc website, so if you want to update the firmware/drivers, you'll probably be able to find it through your computer maker's website (HP, Dell, etc.). Your drive is probably an OEM model so going through the computer's maker is probably the best way to get the proper drivers/firmware.
If updating the drivers/firmware doesn't work, then you may have to try an older version of Authoring Works 4. You'll need version 4.0.12.42 or below; those versions use the same writing driver as version 3 I think.
>
>How do I check what drive I have installed?
>
>
Right-click "My Computer", select Properties-->Hardware tab-->Device Manager.
Expand "DVD/CD-ROM drives" to see the make and model.
I have an mkv that I am trying to convert to to a 25GB bluray. I am able to read the file, create chapters points, and create a menu. It plays fine in the simulation. When I start the coversion it goes for a few minutes and then I get a pop error box that says not enough storage space. I have 600GB available on the destination drive and the 500GB on the temp directory drive. I have 6GB of ram on my system. I am running Windows 7 64 bit. It is not a permission issue within windows as I am able to do other conversions using the same folders. Any ideas why this is happening?
Several of us have had this problem. Someone said they could render the disc in Batch Mode (even if it's a batch one one...), and that works. There *is* a permanent solution, but I cannot recall it right now.
I have a .wtv file that contains a MPEG2 stream recorded from a DVB-T USB device.
The files seems somewhat corrupt: Windows 7 refuses to convert it to the .dvr-ms format and TVMW5 refuses to convert it to MPEG2 PS (an empty "ActiveMovie Window" opens and the program seems to hang).
However, if I bypass the convert to PS step, I can view and edit the file; but when I select a part of it for export as MP4, the resulting output shows a frozen frame from somewhere the middle of the file until the end; it looks like the DVB-T stream was badly damaged at some part and the TVMW5 encoder choke on that part, while with the TVMW5 clip editor, I can successfully navigate anywhere in the file...
Since this recording contains an important part that I want to play on a non-Windows platform, I need absolutely to fix this file and convert the wanted portion: any suggestions ?
I've encountered something like this before. This usually happens because the broadcast stream signal is weak (when watching TV, the picture starts to stutter or become blocky). In these cases, you won't be able to convert to MPEG-2 PS as you've experienced. I've been able to fix it by cutting out the corrupted section in the cut-editor.
Typically, in the cut-editor you can see where the corruption is because the thumbnails will stop appearing and the preview will not function correctly.
Since I usually don't need the corrupted part, I cut/delete that section or split the clip a few seconds after the corruption. I then check the resulting clips to see if the corruption still exists. If it doesn't, it will output just fine.
I'd say your signal is too weak, which is causing the corruption in the recording. That's not really TVMW5's fault; I don't think any program will like a weak signal wtv file. Your best bet is to get a better antenna or try and get a better signal by moving your antenna to a more optimal location.
Maybe it's just me, but it seems like the latest version (5.0.6.38) is better at importing wtv files even if they are missing chunks of data due to a weak signal. Of course, you'll still empty/corrupt frames where the weak signal is.
You guys are lucky; I can import wtv files, but they always freeze at about twenty minutes in and play the frozen frame for the duration of the movie. Am I the only one having this problem?
Gord
TKRAVE, isn't it also dependent upon what kind of codecs you have installed as well? Seems like I could not open FLV files at one point but then installed a codec and it worked.
I just moved TMPGEnc 4.0 Express to a new computer with Windows 7 Pro (64 bit). The program now will not allow the video part of an avi file to be loaded. I can load the same avi file if I use the trial version of TMPGEnc Video Mastering Works 5. I can view the file with Windows Media Player and other video players. The file was created with Adobe Premiere. Any assistance will be appreciated.
I'd say it's a codec problem. Make sure the codec is for the 32-bit version of Windows and not a 64-bit version; I think 4.0 XPress will only be able to use 32-bit versions of any codec.
I bought this updgrade, but it does not work on Windows XP Pro. Wish they told me that before wasting my money. Now they have blocked the licence on my version 4 software and refuse to refund my money. A BIG RIP-OFF. DO NOT BUY.
That's odd. I have TMPGEnc VMW5 installed on my 32-bit XP Pro laptop and it runs fine. Are you getting an error message during installation, startup or encoding?
Re: NO SUPPORT, this forum seems eerily lacking answers from TMPGEnc staff, and there hasn't been a software update since February. Did Pegasys drop support for this software?
I believe david is using a 64-bit version of Windows XP Pro, which is why it doesn't work for him. Apparently he didn't bother to download the trial or read the system requirements.
Regarding support, TMPG staff have never really had a presence here, which is why they specifically say that it's for users to communicate with other users.
Just because they haven't released an update since Feb doesn't mean they dropped support; that's actually an odd statement to me. Tons of updates would only mean that there are tons of bugs.
If you want support, USE THE SUPPORT CONTACT FORM. That's what it's for. http://tmpgenc.pegasys-inc.com/en/support/support.html
Most people get pretty fast results when they use the form.
Sorry for the CAPS, but for fuck's sake, I feel like I type this shit out way too often.
Anyway, I am guessing an update is coming soon; an update was just released for the Japanese version on April 22nd.
Sorry ViperGeek, that wasn't meant to be directed entirely at you; I think I'm more irritated by this straight-from-the-90's BBS. How about a modern forum, Pegasys?? One that's easy to search, has Stickies for important information, and all the other nice stuff you see on EVERY.OTHER.FORUM??
>Sorry ViperGeek, that wasn't meant to be directed entirely at you; I think I'm more irritated by this straight-from-the-90's BBS. How about a modern forum, Pegasys?? One that's easy to search, has Stickies for important information, and all the other nice stuff you see on EVERY.OTHER.FORUM??
None taken. It's good to see you back, helping fellow VMW5 users with their issues. Frankly, your help was a primary reason I took the plunge and purchased the software in the first place!
A real vBulletin-like discussion forum /would/ be quite nice. Occasional presence by Pegasys -- as is typical in other product-based forums -- would also be welcome and appreciated. Not every question deserves it's own Support Ticket, and there's an economy of scale when posting answers on a public forum. One question with one answer posted here can save 100 similar questions posted privately via Support Ticket.
Actually, I already had Version 4 running on the system and was told by Pegasus that is was a direct upgrade for version 4. Now I'm told that it only works on 64bit with Windows 7, not XP PRO 64bit, even though the version 4 worked on 64bit. What I'm pissed off about is that now they have stopped my version 4 license and will not sell me a new license. They have said I need to upgrade my computer to Win 7. Not really a satisfactory solution. I am happy to pay for the license, but it seems that now that I bought the upgrade, I can't downgrade.
If I'm the only person in the world still using XP Pro 64bit, I'd be really surprised.