This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
Has any1 had any success with making a AVCHD or bluray disk using tmpgenc4 with spurs engine using H.264/AVC ??? i have had no luck. I tried making AVCHD disks many times but had no luck.. however using premier pro & using the main concept H.264/AVC output it made AVCHD disks fine. And i'm using the same settings for both. I'm getting a bluray burner soon so hopefully i will find a way to use the spurs h.264/avc output to create a compatible bluray H.264/AVC file/disk.
if any1 has successfully created a bluray or AVCHD compatable file/disk using the spurs engine output. please tell me how you did it and what your settings were.
Can anyone help ? The resulting mpegs from TMPGEnc MPEG Editor 3 play fine in powerpoint visually - but theres no sound. Its driving me nuts ! Any suggestions ? Thanks !
Motion looks "ghosty", ie. subjects moving in front of re-coded video are not as clear as on Sony AVCHD player (or Splash Player) playing .MTS files directly. Instead they leave appear with trails.
I've noticed that changing the level makes some difference (slightly better with level 3.1 than 4.1).
My guess is that the ghosting has to do with your framerate or deinterlace settings.
Currently, you're doubling the framerate to 100fps and then outputting as 25fps. I think you should only double framerate if you're actually going to output at the higher framerate (i.e. doubling 30fps to 60fps and outputting in 60fps).
Have you tried "Deinterlace always" (without double framerate) with an interpolation method?
I've tried changing the field order as my first guess. I have tried the default deinterlace always with one method of interpolation. That didn't seem to work either. Slightly concerned about the fact that interpolation will degrade the quality of picture.
I think that it seems like I was getting the framerate wrong. Indeed, I'm doubling the framerate. What the recommended clip input settings would be for 50i mode (I assume that means my videos are 50 frames/second interlaced)?
INPUT:
Clip properties:
Display Mode: Interlace.
Field Order: "upper" field first ( HD is upper fields 'NOT' lower )
Aspect Ratio: Pixel 1:1 (square)
Framerate: 25 fps ( it is 50 fields per second - but the frame rate is 25 )
Filter properties:
Deinterlace when neccessary
OUTPUT:
MPEG-4 AVC (1280 x 720) 25 fps
Level: 4.1 ( 3.1 is for SD resolutions )
1 Pass Constant Bitrate 17500kb/s
Motion Search Range: 256
Detect Scene Change: On
GOP Length: 33 frames
Entropy Coding Mode: CABAC
Motion Estimation: Quarter
I am using TMPEG DVD Authoring 3 and is there a way to delay the activate button for a few seconds after the title page has loaded??
What I have done is:
created a dvd title page that fades in and then the play movie and scene selection fonts fade in..I want to, AFTER the play movie and scene secletion, font has faded in to have the active frame around either of them to then press the play button
This is not possible and I don't believe it ever will be. So why do some commercial DVDs appear to be able to do this? Simple. Their transitions into and out of menus are video files. Usually, you can see when the video ends and the actual menu begins by a slight pause or the text will become sharper, but some DVDs hide it rather well such as the Lord of the Rings menus.
Unfortunately, DVD Author 3 (and Authoring Works 4) doesn't let you use video files to transition between menus. However, it is possible to use the first-play track as a way to transition into your menu when you first insert the DVD.
Why TMPGEnc Authoring Works 4 didn't work on my xp windows computer? Other computer which is vista version works well. Program don't start all in xp windows computer.
well ive had the issue when software starts to mess up or not work, so after doing a chkdsk function and unistall and reinstall of the said software if it still doesn't work right, i normally format and do a fresh os install
works a treat and also allows you to sort your system out to how you wish it to be.
You are probably right. Os reinstall lead to large number software install. Therefore i evade thus alternative. I wonder...how is possibly that three different computer was similar out of order?! Thank you good advice!
When some of my clips are too loud, how do I adjust the volume of them? I found the audio filter and lowered the percentage but there is no different in volume when I play it back. If the difference will only be there after I burn the disk, then I can't really check to see if the volume is acceptable. Same with Normalization. How can I make and hear a difference before I output the project?
Thanks in advance,
Reduce the % a LOT...I never used it to lower the sound, only to increase, and I have to put 250% or 300% UP to have a good normal sound level (using 5.1 to render of course) for a normal downloaded AVI movie...so I think you must try to reduce 50% or even less to get to the point you want.By the way...you will be abble to ear the sound level change on the preview window...go back and change the % if it´s not good enough for you.
If ever you are stuck for a program to view things on on your computer, then VLC Media Player plays every type of file you can every imagine, as for a converter I use AppGeeker, can't go wrong there. http://www.ilikemall.com/how-to/convert-flv-to-mov-mac.html
I have a Canon DV camcoder which records in a 720X480 widescreen format. The native ratio after capture is (1.5). When I Add the clips to the express 4, it automatically sets the aspect ratio of each clip to 4:3, and to get the correct aspect I have to manually set it to pixel 40:33. Everything from there encodes great, but since I like to capture with scene detect and have a tape split into multiple clips, when I convert for projects, I may have to manually adjust the aspect ratio for a hundred clips as each one to the project. Is there a way to automate setting the aspect ratio for all the clips at once?
I think you're gonna have to change the aspect ratio one by one.
I was thinking you might be able to do it through your output format settings, but that will only add black bars to the sides if the clip properties are still set to 4:3.
I'm in the creating menu's and I want the screen to loop the video and audio. (Motion Menu). So far the video loops with no problems but when I select the video + audio, there is no audio. It defaults to 15 secs look in the menu setting (which is set to use local settings instead of global settings) and i set the Motion Menu with video + audio to 45 secs.
Am I missing something here, since the beginning of the movie has audio? (there is audio since you can play the movie and then audio is present.)
Maybe someone can help me here.... I maybe overlooking something....
You have to set your BGM to play the audio from the video you are using for the motion menu. By default, it expects you to use some other audio file.
To do this, go the Menu Item Editor for your background and select the "BGM audio selection" tab.
Then just check the box for "Use audio from the background source".
What kind of source file is it? If it's an MPEG, you can demux the audio and then just load the audio as a separate file by using the Demultiplexer in the Start Stage-->Advanced Tools-->MPEG Tools.
I haven't run into that error so I'm not sure what the cause could be.
It is actually a dvd recording off of Directv. I record them onto DVD-RW's and then put it on my computer to strip out the commercials. (I like SCY-FY, so I record a lot of the movies.) I also have other uses (like from my Movie Camera)and make DVD's out of pictures "slideshow", but this is the main use. I would think if you can loop the video, the audio should be no different. The files on the DVD-RW are standard VOB files and TAW4 works great for it.
Does this make sense?
Now are you saying that I would have to strip out the audio out of the first 45 seconds of the movie and incorporate it into a file for use???
Yes, basically you separate the audio from the video, creating an audio file. You should then be able to load the audio file as your background music in your motion menu.
Usually you don't have to do this if you using the audio from your background video, but since you're getting that error, this method might work.
I see how in TMPGEnc there is an option where you can use a transition effect. It seemed like there were a lot of them to pick from so I just picked something that I'm familiar with, a fade and set it for about 7 seconds, but I never saw the fade in action. What is it supposed to be fading, and/or what are any of the other transition effects supposed to do?
Also...dumb question but I have to ask...How do you pronounce TMPGEnc?
Transitions appear between clips in your track. So if you choose a fade out, it will fade out of the selected clip and into the next. You can preview the transition in the Transition Editor window or in the Simulation stage.
By the way, transitions can only be applied to the end of clips, but there is a way to add a transition such as a fade-in to the beginning of the first clip.
First you'll need to create a clip composed of a solid color.
To do this, just go to the Source Wizard and select the last option, "From a color matte or pattern".
Set the color (or pattern or picture) and duration then click OK.
Drag the color clip to the beginning if necessary. You can then apply a transition to this clip to create a fade-in effect into your first real clip.
If you want to add a transition between scenes within a clip, you'll first have to split that clip into two clips.
You can do so with the Split clip function in the Clip Editor. Once in the clip editor, just navigate to the point you want to split the clip and click the split clip button (looks like this: ←|→ ).
Once you've made two clips from your clip, you can add a transition between them as usual.