I 've got a question about using TMPGEnc 2.5 free with an external mpeg2 video encoder.
The functions in TMPEGEnc are really good and the mpeg2 encoder which I bought with a videosoftware only supports choosing vcd-, svcd- or dvd-quality. And that are extremly poor possibilities.
Is it possible to use the encodingoptions available by the free TMPEGEnc Software with my mpeg2 encoder?

I don't think so, TMPGEnc 2.5 doesnt use command line so it doesnt support 3rd party very well. Why not just buy the TMPGEnc 2.5 Plus version, that supports MPEG-2, its well worth the $37 bux.

Spammers...I hate your existence...

Okay this is really naffing me off. I could swear vitriolic hate towards TMPGEnc at the moment. Why can't their f***ng packages update properly when they release a f***ng upgrade. Senseless idiots! I thought (more fool me!) I would upgrade to the latest version 4.f***ng3.f***ng1.f***ng222 but now everytime I try to go into the damn thing, it keeps saying "Necessary files for the application could not be found or properly readed. We f***ng advice you to uninstall and reinstall the application"

I HAVE UNINSTALLED FROM THE ADD/REMOVE PROGRAMS (because TMPGEnc thought not to have it's own f***ng uninstall option from within the programs menu)... but everytime I try to reinstall the latest upgrade program, I keep getting the piss taking 'We advice you to uninstall... ' message above.

So now I've got a program I have paid $45.95 for and can't use.

Has anybody got any suggestions to get round TMPGEnc's upgrade screwup, before they receive an email from me, they really don't want to receive.

Many thanks in advance.

Jebus, Calm down before your vein pops! I know their installer is a complete package so its not really an update package you download. So it simply overwrites your older version not add new items to your old.

You probably got some conflict or problems with dll driver and its not helping TMPGEnc run. Try using SystemInternal FileMon to find what is causing it bug out. My guess is you probably got a corrupted codec or ffdshow filter. Another thing is don't use codec packs with any encoding software, they will cause problems unless you are an advance user who can manipulate the scripts to correct any issues.

You see I don't know about dll's and ffdshow filters. I even tried to revert back to a safe system restore point, before I attempted to upgrade. What I have now done is downloaded the trail version again, hopefully I still have a valid license key, so I will just use that on the trial version when it expires.

If I were you, I'd have a technician take a look at your whole system. It might be filled with junk and corrupt DLL or conflict galore, once its cleaned up it might just run faster and better.

My systems fine. Spyware and virus free. I run programs frequently to check for this type of stuff. I have a 4200 Dual Core Processor with 1GB memory and it flies through every task I ask it to do. So it's not in the least bit unresponsive. Thanks for reply.

See http://stash.miloonline.net/dvd_read_error.jpg.

I get this error whenever I do Source -> Source Wizard -> DVD-Video, DVD-VR or DVD-RAM -> Next... -> [Select VIDEO_TS folder from DVD].

Isn't TMPGEnc 4XP supposed to be able to read video and audio straight off DVDs?


-- M. Cooper

Don't you just love that thing they invented for DVDs? those annoying useless CSS encryption? Sounds like you probably didn't bypass it if you plan on making a copy of it? So to answer you, No TXP4 can't read directly off an encrypted DVD. It can read directly if its a custom made disk with no encryption.

no its not just ecyrpted dvd's, its happening to quite a few dvd's

Can you change the template layout.
e.g. move buttons around

I think you got the wrong software, TXP3 templates are for video output, so what buttons are you talking about? If your referring to TDA3 menu buttons, then no, you can't move the templates from TMPG. You can only move the buttons if you select custom templates.

I merged a movie (an AVI file of 761.962 kB) with its subtitles. This resulted in an AVI file of 81.630.032 kB...
Is there a way to reduce the size of such files?

I'm a bit confused, might just be different formating standard, but the period between your numbers are throwing me off. 761,962 KB? that's equivalent to 761 MB which sounds about right for an AVI movie of 2 hours. The new avi file you encoded to is probably uncompressed so you screwed up on the settings somewhere. I think AVI template has uncompressed as the selected default, so just change it to Xvid or DivX and you should be ok. But kind of a waste of time to re-encode a whole movie just to have subtitle when you can simply use VirtualDub to do a quick pass through with subtitle takes about 10 min.

I tried to author a dvd the other day and got to the final step. When I clicked write to dvd button it told me that I hadn't configured my dvd burner. I clicked on the button and it said the that the drive was stopped. Can anyone help? I've tried uninstalling and reinstalling the drive but no game. Thanks a ton.

Check for a process called "bgsvcgen.exe" in your task manager. If its not there then you will need to turn it back on. Right click My Computer > Manage > Expand services and applications > services > double click on "B's Recorder Gold General Service Library > then start the service and set it to auto start on system boot up.

This is a crucial DVD burning tool for TDA3.

I loaded a source avi which I want to re-encode.
After successfully starting the encoding a preview of the source video
is displayed in the Xpress window.

How can I turn off the displaying of the currently encoded video (part)?

Peter

Right click the window > Preview Frequency > No Preview.

Hi all,

I'm using TMPGenc 4.0 Xpress 4.3.0.220 to encode a lot of MiniDV camcorder clips from AVI (captured by Ulead VideoStudio 9) to DVD-compatiple MPEG.

Encoding any one file works fine. Trying to encode more than seven or eight in a project (or batch tool), though, XPress crashes. If I re-run the project it doesn't crash on the same file; sometimes sooner, sometimes later.

Has anyone else experienced anything like this? I've got about 500 clips to encode!

Thanks for any advice...

(I'm running XP Pro SP2 on an E6600-based PC with 2GB RAM, lots of disk space etc. - the PC can handle it, basically.)

Also happens with 4.3.1.222, by the way...

TXP4 uses directshow for AVI(DV) files so you might want to check your external codec for any issues. Your external codec might not be able to handle multiple projects at a time so it bails out on TXP4. If I were you, i'd load up ffdshow or k-lite and have it attempt to fix any corrupt codec or use ffdshow to stream to txp4, the newest version fixed some of the compatibility issues with txp4.

I got an issue....I'm trying to encode an AVI film to MPG so I can get it to DVD, the only problem is that after the encode, I tried it to make sure the audio was in synch only to find out that the encode turned out black and white (although the audio WAS in synch). This has only happened the one time and was wondering if anyone had any ideas as to why?

Only place in TMPGEnc 2.5 I can think of to turn your video to black and white is the Custom color correction filter > Saturation set to -255. If that filter isn't on then its probably your external codec that caused this problem. This software is pretty solid to make a mistake like that, so I usually suspect codec or something on your system screwing things up.

Hmm...can't find a color correction option anwhere, it's also happened with another file, too, although that one played in color with vlc but not in wmp. Where would this option be? I'd like to check that

Found it, but it wasn't checked so I don't think that could be it. They're basically just xvids, one came as two files, so I've joined them and tried to re-encode and it ends up black and white, the other was one file and that was also black and white. Originally I thought it may be because I joined the two files, but the second one was only one, so I'm stuck as to what could be causing it

Thats a bit puzzling, you were able to view it in color with VLC but not with WMP? I would suspect problems with WMP and not the encoder or the source file. Try going into WMP > View > Enhancements > Video Settings and check your Saturation setting.

Another way to confirm if your newly encoded file is black & white is to import it back into TMPGEnc 2.5 and watch the preview. I don't think having a black and white clip joined with a color would turn the whole video into black and white so this little issue might be just from WMP.

Well, I stuck it on a DVD using tmpgenc dvd author and that was Black and White on my dvd player, that's how I noticed it in the first place......it's baffling me, it really is

Hello... I am trying to edit some video clips... I can without problem take mpg and cut it etc... but when I choose .avi I only get video!!! The sound WONT come up!!!! I have no idea what to do... have tried everything... am I missing codecs or something???

Plz help me!!!!

I need my program to work... plz...

You may be right, probably a missing codec, either AC3, AAC or MP3. Likely MP3 because your using AVI container. Use GSpot on your source video to find out what audio it uses then download the appropriate codec online somewhere.

Let me know if i'm way off or if you run into some other problems.

I have used Gspot already and it say that I aint missing any codecs... I have no idea what is wrong... Gspot said everything is working and all codecs are in place... but I am gonna try clean regedit once and then install TMPGEnc again and if that doesnt work I will upgrade codecs anyway...

Could this problem have anything to do with the fact that I dont have Windows Media installed? I only have window media classic installed because I use other programs to watch video clips..

ooooooooooook I decided to try with "lots of stuff" option instead of custom option on codec install and now avi is showing up... damm it was codec all along... problem solved...

oooooooooooooooooooooooooook me yet again... program is now showing audio link also under video link BUT when I try to edit the clip only video ends up... still NO sound... what the heck is the problem????

before audio wasnt showing but now it is.... still need help guys...

ooooooooooooooook but this time it would help if you can tell me what audio codec your avi file uses. Probably best if you simply download a codec pack with all the codecs you ever want to use, but be warned this could cause problems later on if your unorganized. It will probably work for the meantime tho, go to www.freecodec.com and download K-Lite 3.25 Full, then load up TMPGEnc 2.5 and import your files again. Also make sure that you have DirectShow file reader enabled in the Options > Environmental settings > VFAPI Plug-in and uncheck AVI file reader so FFDShow can kick in to decode your file.

Let me know if this works.

I want to re-encode an avi video with TMPGEnc Xpress.
After loading the avi I have a couple of possibilities to set the target size:

In "Source"
in "Format"
In "Format"->DivX codec Settings"

Which one is taken ?

Similar question with "crop" values: I can set cropping values in "Source"
and in "DivX-Settings" Which are taken for the encoding process ?

It seems to me that the values in DivX-Settings are NOT considered ?

Further question: Is the video cropped at first and then resized or vice versa ?

I'm assuming "Source" = "Filters" with Picture resize and Picture crop. Another thing to clear up, which output template are you refering to with "DivX-Settings". There is only two available templates, DivX file output and AVI file output which you can select the external DivX codec.

Now that the confusion/terminology is cleared up, i'll start with the Filters.
Picture resize will modify the source pixel video resolution, same with cropping.
When you select Format output, the resolution here would be your "viewing" resolution. Here's an example, 720x480 pixel video is the source, lets say i resize it to 352x240 with the picture resize filter. Then during the format I use the size 720x480 then this will be my new viewing resolution and the source video (352x240) will be in the center of the 720x480 viewing resolution. Another aspect to all this is the aspect ratio, which doesn't modify the resolution, but simply stretches the pixel to fill up 16:9 or 4:3 ratio.

I hope that answers your question, I recommend not touching the resize filter and simply change the viewing resolution in Format tab, it will automatically resize the source video to fit within this viewing resolution.

Tmpgenc took about three hours to encode a full movie, now all of a sudden it takes 7 to 8 hours just for one movie. Can any one help me?

It all depends on your source file and system. TMPGEnc 2.5 is the same for all computers, so if theres any problems its very likely to be either your source video or your system.

With that said, the increased speed is probably a codec corruption that's taking your system resource and or having difficulties reading your source file. Best way to fix it is to find out more details on your source file and double check your system for any particular codec conflict or corruption. Another piece of advice, don't ever install FFDShow filter or codec packs unless you are an experience user, it will only cause more trouble.