How do I use TMPGENC to encode jpg files to mpg files.
Also can this be done in batch mode ?
I am ok with avi to mpg but jpg to mpg has me puzzled . Using version 2.5

Thanks

Buy best dreambox 800 se from China factory
[b][url=http://www.dreamboxbest.com/dreambox-dm800ses-hd-pvr-digital-satellite-receiver-p-5.html]Dreambox 800 se [/url]dm800se hd pvr Digital Satellite Receiver:[/b]


1.400MHz MIPS processor

2.SIM: 2,01

3.Bootloader 82

4.Gemini: 5,10

5.With 6cm stille ventilator en de HDMI-connector

6.DM800 Garantie is een jaar.[b]





[url=http://www.dreamboxbest.com/dreambox-dm800s-hd-pvr-digital-satellite-receiver-p-2.html]DM800se[/url] Dreambox 800 se hd pvr Digital Satellite Receiver

[/b]
Krachtige ontvanger voor digitale TV en Radio-programma's.
[b]Main features are a 400 MHz processor the Dreambox DM 800 HD se supports the Linux TV API[/b]
Neem een ​​kijkje te HighDefinition TV op je Dreambox



10/100Mbit compatible Ethernet Interface



HDMI-connector



Plug & Play Tuner



gekleurde OLED-scherm



plug & play-sleuf voor een interne 2,5 "SATA harde schijf[b]

[/b]
Technische eigenschappen
[b] 400 MHz MIPS processor



Enigma 2, Linux Operating System



gekleurde OLED - Display[/b]

[b] [url=http://zh.wikipedia.org/wiki/MPEG-2]MPEG-2 [/url]/ H.264 Hardware decoding[/b]
[b] Tuner: DVB-S, optioneel: DVB-C, DVB-T



Tuner Module, Plug & Play



2 x Smartcard-Reader (Dreamcrypt CA)


Mini USB voor Service-en software-update


10/100Mbit Ethernet Interface


1 x Scart (RGB, FBAS of S-Video)



HDMI



2 x USB 2.0 (e.g toetsenbord)



analoge modem



S / PDIF-interface voor digitale bit stream uitgang (AC-3)



64 MByte Flash, 256 MByte RAM



SATA

- Voor de interne HDD 2,5 "



ongelimiteerde kanalen lijsten voor TV / Radio



Zaptijd <1 seconde



automatische service scan



bouquet-lijsten



EPG (elektronische programmagids)



meerdere LNB-Switching control (DiSEqC)



OSD in vele talen en skin-support



teletekst Decoder



extern 12V voeding[/b][b] [/b]

[url=http://www.dreamboxbest.com/dreambox-dm800s-hd-pvr-digital-satellite-receiver-p-2.html]DreamBox 800HD[/url] SE DM 800 HD se technical data









DBS-Tuner mit DVB-S2:

Frequentiebereik 950 .... 2150 MHz

Demodulatie DVB-S (QPSK), DVB-S2 (8PSK, QPSK)

Symbol rate DVB-S: 2 ... 45 Mbaud / s, SCPC / MCPC

DVB-S2: 10 tot 31 MBaud / s (8PSK), 10 -30 Mbaud / s (QPSK)



Video decoder:

Video Compressie MPEG-2 en MPEG-1 compatible, H.264

Videoformaten 4:3 / 16:9

Letterbox voor 4:3 TV-Device



Audio decoder:

Audiocompressie MPEG-1 en MPEG-2 Layer I en II, MP3

Audio-modus Dual (hoofd / sub), Stereo

Frequentie: 32 kHz, 44,1 kHz, 48 kHz, 16 kHz, 22,05 kHz, 24 kHz



Uitgang analoog:

Output Level L / R 0,5 Vss op 600 Ohm

THD> 60 dB (1 kHz)

Overspraak <-65 dB



Uitgang digitaal:

Output Level 0,5 Vss op 75 Ohm

In de steekproef van gegevens Filtering 32 kHz, 44,1 kHz, 48 kHz S / PDIF-uitgang optisch, Toslink





Ausgang Video:

Ausgangspegel FBAS 1 Vss + / - 0,3 dB een 75 Ohm



Video parameter:

Input Level FBAS 1 Vss + / - 0,3 dB op 75 Ohm



Fysieke specificatie:

Omgevingstemperatuur +15 ° C. .. +35 ° C

Luchtvochtigheid <80%

Afmetingen (B x D x H): 225 mm x 145 mm x 52 mm

Gewicht: 2, 5 kg zonder harde schijf

Wij zijn een fabrikant van Dreambox digitale satellietontvanger inclusief Dreambox 500C, dm500c, DreamBox 500s, dm500s, Dreambox 800 se, Dreambox 800HD, dreambox 800 HD PVR, DM800HD, Dreambox 800, dm800s, Dreambox 800C, dm800c, DM800 HD PVR, DreamBox 8000 hd, Dm8000hd, exporteur van Dreambox 500 hd, DM500HD, DM500 HD PVR, Dreambox 800HD se, DM800HD se, Openbox S9 hd, hd Openbox S10, Wifi brug, Smargo Card Smart Reader, Power Supply gemaakt in China (vasteland), krijgen alle dreambox van Dreamboxs-store.you 'll sparen meer geld en tijd!

I bought Nero 7 ultra edition. I was able to edit video and burn it to DVD with no problem. As soon as I downloaded the newest program versions all of the video is out of sync with the audio. (example: the lips move then 1 second later the words come out.)

I called nero and they suggested re-coding the files using tmpgenc. Will this help? I never had to use an encoder before so, be gentle :)

Hallo Ashy, how are you? I hope fine.

I want try your Media Editor but the istalling shield give me this message:

" error 1335 The cabinet file 'data1.cab' required for this istallation is corrupt and cannot be used. This could indicate a network error, an error reading from CD-ROM, or a problem with this package."

after press "ignore" tab, a second message appears: "error 2350"

I downladed your trial version but does not install in my computer.

Can you help me?

I use Pentium III 850, 384Mb RAM, Window xp pro SP1
and I want to edit only 2 Mpeg videos 352x288 low definition......

I think can do it.

Thak you for answer.

Gio

I recently edited a mpeg2 file with TMPGEnc Editor without any resampling, after which the audio was visibly lagging in the edited version. I just needed to trim material from the original file. Why does the lag occur, and is there a simple fix? Thx for your help.

i have theses white lines ontop of my Mpeg files is there a way to get rid of them using this program ( TMPGE nc NET ). I don't see the option. Please advise.

crop them out, also making a mpeg some odd size (360x240) will make white or green lines on the top or bottom

The .avi files my new Canon Powershot A620 cannot be loaded into TMPGenc - never had this problem with any other .avi's put out by digital cameras. Is it a weird codec or something? Other programs (FX Video Converter, Digital media Converter) can open them fine, but I LOVE TMPGenc and really want to use this - any ideas?

Wendy

I want to create an mpeg movie from a large collection of jpeg images.
The images have small changes from one to the next.
How can I do this with TMPGEnc?
v2.5

I have tried TMPGEnc to convert various files from MPEG2 to MPEG1 (My old video editor only accepts MPEG1), but I cannot make it work. The sound works fine, but I always have a still image (both in the preview and when playing the resulting file). The image displayed is either the 1st picture of the movie or the last one, depending on the format settings for the conversion. The source data are acquired in 728x576 MPEG2 format (I don't have more information about the actual encoding format). Does anybody have an idea on how to make it work, or know a free tool that could be used for this conversion? Any help would be greatly appreciated. Thanks a lot.
PS: if anybody knows about the binary format of MPEG headers, I am also interested (It would help me to provide more information about the encoding...)

Try changing the suffix of your MPEG-2 file to VOB. I'm not sure why it works but it has for me. I hope that it doe for you.

is there any way posssible to speed up the analyzing? only thing i did was resize the video and im doing it on tons of tons of videos and it takes about 2 1/2 hours each movie. just wondering if there is a way to speed it up. thanks

1.9 ghz
1 gig ram

resizeing ttakes up a fare amout of cpu power and alalyzing actually encodes the video (look for the hidden temp file) at full quality then decides which parts it can pull for the 2nd pass. so the ony way you can speed it up is to a) have the resize turned off of b) the source is already the proper size. if you are worinkg with 720x480 film :) then you are stuck like chuck

Im having a problem here, im re-encoding xvid to mpeg2 for a DVD, and it works but lets say a video is 4 minutes, its only doing a 1:30 or so correctly then sits on a single frame the rest of the time.

I own TMPGEnc MPEG Editor, and have successfully used it to edit HDV files. It input the HD MPGE2 transport stream files from my Sony HD camcorder, edit them, then create HD MPEG2 program stream files with a minimum of re-encoding. However, I don't see this capability in your list of features - did TMPGEnc MPEG Editor create my HD MPEG2 program stream files correctly but you just don't advertise this feature, or are these files corrupted in some way?

Note that TSUNAMI MPEG Media Editor does make it clear that it supports HDV files, and will save them to HD MPEG2 program streams. Is the TMPGEnc MPEG Editor exactly the same product without the box, so it works in exactly the same way.

And why isn't the TSUNAMI MPEG Media Editor available for download?

When I join mpg files, about 75% of the time I get this high pitched kind of click sound where the 1st file ends and the 2nd starts.

How can I stop that annoying sound from showing up in my joined mpgs?

try cutting 1 sec off the beginning and end of each clip then join them, the click might me the sound couuting off then on at the end of each clip.