This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
hi
is there anyone who can help put a subtitles inside the mpeg movies so i can make a vcd with subtitles built in
thanks a head
raanan
please make sure to write the version softwere in your answer
when i encode a movie to SVCD with aspect ratio "16:9 Display" and play it in my standalone dvd-player the picture is shaking!
what have i done wrong?
something with pal and ntsc(film)?
the movie have a framerate of 23.97. and that's ntcsfilm, right?
Are you sure the original frame rate of the movie is 23.976. I doubt it is because this isn't very often used. Check to make sure the source isn't 29.97 fps.
If it is then this is why your movie is jerky, because you have changed the frame rate. You must ensure the output frame rate is the same as the input, but if this frame rate doesn't comply with your T.V. system your going to have playback probs.
If the movie really is a the frame rate you say and you need to convert it then check back on this BBS shorlty as I will be posting a solution to this. Look for something about frame rate conversion in the title.
I understand that the Force Film option is to remove interlace from the original source. If your source is 29 fps interlaced and you don't force film, you get horizontal trailing lines. Very annoying. Use then use the 3:2 pull down option to sync the audio in TMPGenc.
Hi,
does anyone know how to speed-up TMpeg ? I'm running Win2k on Athlon600 with 256 CL2 Ram.
Encoding a 100 minute video to pal vcd (source from dvd2avi) takes over 6 hours (on High Quality).
My friend runs TMpeg on Athlon800 and this only takes 4h, but on Highest Quality.
you might have confused PAL with NTSC.. usually american things are NTSC... you have to set everything to the same form. on my dvd player there's a ntsc/pal switch.. maybe that might work.. well im sorta bad at this but i tried to help =)
I'm using TMPGEnc 2.53 and loading a *.d2v and *.wav file saved from DVD2AVI then trying to convert it to a mpeg1 file to make a VCD on an 80 min disc. If I use the standard VCD NTSC settings the resulting file size of the *.mpg is 835MB. I tried reducing the bitrate to 1050 kbps which showed an estimated file size of 776MB but 5+ hours later the finished *.mpg file was again 835MB. I tried once more, this time reducing the bitrate all the way down to 900 kbps with an estimated file size of 685MB, but again 5+ hours later my finished *.mpg file was 835MB. Any ideas what could be going wrong?
the minimun bit rate that most players will play is 1150kbs,I think this could be a default setting in tmpgenc,but I read this in "vcd help" but dont know if it will work,try encodein your avi. to wmv/asf then encode to mpeg1,but I don"t see how this would make a differance,but this guy swears on his life that it does........good luck
ps:you only need to loose about 35mb to fit on a cd,so extract the audio and re-encode it at half the bit rate, then put them back to together,this should work..
you should be able to lower the bit rate,and I don"t know why it doesn"t work,have you tried the over burn option in nero it allows you to burn a bit more than the cd says it holds, but I never have tried it.......
The reason why your file size is staying the same is because you have used the NTSC video template and then just 'Unlocked' the settings and changed the bitrate.
This will work fine for PAL, but not for NTSC.
It happens because you have selected the NTSC template to create a standard Video cd and no matter how low you alter the bitrate TMPG will add padding to the movie which is why you are getting the same file size.
Remember you are now making a non standard Video cd, so you must change the settings accordingly.
To remedy the problem click 'Setting' then click the 'System' tab and change the Stream type to 'MPEG-1 Video cd (non standard)' This should rememdy your problem. Don't worry Nero will still see it as a compliant VCD as long as the other settings are standard.
The other thing I should tell you about before you re-encode is that it's unecessary if you still have the MPEG which you reduced to 1050 kbps.
The simple thing to do is to open up TMPG and goto FILE and click MPEG TOOLS from the menu.
Click the 'Simple multiplex' tab and using the 'Browse' button put the same MPEG file in both the 'Video input' and 'Audio input' boxes.
Next choose your 'Output' and give the file a different name.
Then where it says 'Type' make sure you choose 'MPEG-1 Video cd (Non standard)'
Click run and the padding will be removed and you should have a smaller file which can still be burned in Nero as a compliant VCD.
Thanks. That was driving me nuts but you were right, that fixed it. I tried a bunch more times after that too, though I did switch to a 2 minute video for testing purposes after those first 2 trys seemed to fail.
Im try ing to burn a vcd with nero,but nero keeps saying that the audio is not compliant with vcd,the audio is 2 channel 48000khz 192kbs,so I changed it to 1 channel 48000khz 192kbs,now it says it is still not compliant,is says 48000khz 1 channel is not compliant,so now it wants me to do sterio 224kbs 41000khz,but the original is at 48000khz,wont this make it go out of sync?it has allways accepted every audio stream I have tried,it must be cuz the original is 2 channel dolby surround what is going wrong....thanx
no matter what I do to the audio nero says it isn"t vcd compliant,the movie is "snatch" the box says it has a 2 channel surround and dolby digital 5.1,which one should I use? and how do I know which track is which? whan I rip the dvd and extract all the audio tracks there is one 2 channel track and 4 six channel tracks,I am totaly confused as to what track will work, please help???
The VCD you are creating is not being accepted because it is NOT standard! and there is no way NERO has ever accepted those settings for VCD without complaining. You must have created a SVCD for Nero to accept those settings without complaining.
The reason for your dilema is because your sample rate is wrong. You must change it to 44100khz two channel stereo.
It doesn't matter if the original was 48000khz or dolby or or not. You won't lose sync.
The audio channel you should choose when ripping a DVD should always be the 6 track dolby digital channel. Most DVD ripper/encoders such as DVD2AVI down mix these six tracks to a wav in to a two channel stereo track.
I know what your saying Tecno. If people would only look through the other posts first it save having to answer the same question OVER and OVER and OVER again!!
Jaysus.
what do you mean recognize it as ntsc?if you use a ntsc template and burn it in ntsc you shouldn"t have any problems,what error messages are you getting?
when i used to encode movies in the past, i always checked to see if they encoded right and they were in NTSC form before i would start burning them. Now i am doing the exact same thing but mu burner does not recognize the file as NTSC. I have tried using nero and ez cd creator roxio and they both can't recognize it. I think i'm doing everything right because i have done it in the past. I did load the template everytime. I'm not getting any error messages but when i go to play it in my dvd player it does nothing.
i hope you have some ideas because i'm stuck
thanx
The darker parts of my movies burn almost completely black. Its almost impossible to make out what is happinening. The movies are fine, its only when i put them on disk. Thanks much.
I"m trying to burn a vcd but nero says it isn"t compliant because it is 2 channel audio.how do I change it to 1 channel,do I have to make it mono? I tried toolame 2 layer I tried 1 layer...please help?...thanx