This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
i have a problem with converting xvid-encoded avi's to mpeg-1. the resulting picture isnt smooth, the sound seems ok but the picture doesnt flow as well. could it be something in the envrionment settings? any help would be much appreciated.
That sounds like a Frame rate problem to me, It sound like you are encodeing to a different frame raye as the source avi file...You allways have to encode to the same frame rate as the avi file you are encodeing and if you don"t you will get Jumpy playback...so check that the frame rate of the Mpeg is the same as the avi file...
It could be a few things like the most common is probably that at that point of the movie is were the Immages get more complicated and harder to encode, as long as it doesn"t stop encodeing....
I also have the problem of video and audio out-of-sync. Is there any way that I can automatically copy my mpg file while applying a constant time-shift to the audio, without splitting the two streams and using an audio processor program to change the audio file length? This way, I could minimize the gradual shift - it could be early at the start and late at the end, but over a 40 min program it would be not so noticable.
How are you encodeing your files(what method) and what type of files are you ancodeing ? and are you doing any sort of format conversions (EG)ntsc to pal ect)?
I just re-read your post. The actual size should be 720x480 NTSC or 720x576 PAL. The sizes in the previous post are the sizes without the black bars added.
There are several other sizes available for DVD authoring, but the above is most common to DVD.
1. QUESTION:I am using TMPGEnc (2.57) to make quite a lot of mpeg2 (SVCD, VBR CQ) files (music videos, captured AVIs by VDub). Beacuse of various sources of video, I must then somehow level volume in these files, which means dmultiplex to audio and video, correct audio volume by GoldWave, encode audio again, and multiplex back. From time to time (about 3% files) it happens when multiplexing, that file (which was created in TMPGEnc !) reports "Stream read error" in step 3 - "Rewriting SVCD header". Does anybody know what might be wrong ? Repeating the process doesn't help, but source file seems to be ok, when played in PowerDVD.
2. REQUEST: Possibility of demultiplexing and multiplexing (without merging of course) more files at a time would be very welcomed ! Do you how many clicks I must make when mux/demux for example 50 files ?
You seem to be doing things a pretty crazy, complicated and long winded way.
Firstly the error you are talking about is a bug in v2.57. Download v2.58.
Secondly why don't you normalize the sound as you encode in TMPG rather than extracting the sound and re-encoding.
Thirdly instead of extracting the sound then normalizing and then re-encoding which is pointless in encoding the audio in the first place.
Just extract the audio in the source files you have to a wav file with Virtualdub then normalize in your audio editing program if you wish to do it this way (but TMPG can do this for you itself) then load the normalized wav as your audio source in TMPG when you encode.
This saves all this unecessary messing about you are doing with de-muxing and re-muxing.
If you really do want to extract the audio from the finished encoding just load the file into the 'de-multiplexer' and double click the audio stream. This will extract the audio only as it's unecessary to demultiplex the video aswell.
When you wish to re-mux the normalized audio simply load the new audio into the 'simple multiplexer' and your original MPEG movie as the video source and your movie will be muxed with the new audio and the old one removed.
Last but not least to save your self all the above hassle. Why don't you just load the AVI's in sequence using the 'APPEND' function in Virtual dub and then frameserve to TMPG. TMPG will then treat all the files as one big file. You can then use the normalizing function in TMPG to bring the audio in the files to the same level.
I don't understand what you mean by if i don't have a picture on my preview screen in tmpgenc to try and use virtual dub and if it works to use it as frame serve to tmpgenc please walk me threw this i am new to all of this" i am a dummie"
If you don"t have a Picture then you need to raise the "direct show file reader" but if that don"t work then you use "Virtual Dub" which is a Program that edits Captures video and Frameserves avi files ...If you don"t know what Frame serveing is then you need to go to school and here"s were you first lesson is...http://www.vcdhelp.com/ this site is dedicated to the newbie...
I'm using DVD2AVI to make d2v and wav files from VOB files. Then I load those files into TMPGENC using the Project Wizard. I have the Video-CD NTSC template loaded. I create alot of d2v and wav files for a batch encode job. I then run the batch job. Now, if I try to load the files into Nero, it tells me my mpg files are not vcd compliant. Am I doing something wrong?
If I use this program called mpeg-corrector, it appears to fix the problem with Nero finding them non-compliant. But I wonder why I can't generate compliant files in the first place.
I burned a VCD with Nero with the resulting corrected file and found (on an APEX DVD player) some spots had some "digital blocking." The digital blocking is not observed if I simply play the file using Media Player.
I ran the original mpg files through VCDGear (which said there were 1000's of errors), burned another VCD with this file and found the "digital blocking" was gone. VCDGear appears to have fixed the problem - even though I read on previous messages not to trust VCDGear.
If I try to edit the VCDGear "fixed" file with TMPGENC, I get an "illegal video stream" error.
Help, I'm confused ...
I'd like to convert these VOB files to MPG, edit the MPG, and then burn good quality VCDs.
You should make sure you aren"t encodeing to plain "Mpeg1" but are encodeing to VCD Mpeg1 files and VCD files are differant..To figure out if the file is a VCD file or a Plain Mpeg1 file just load the Mpeg file into the "Merge+Cut" or "Simple Multiplex" with the "Video-CD" setting in the Dropdown menu and set the output file and click "Run" it will then proscess the file so it has a VCD header on it which is probably why you are getting the error with Nero..But if after this you still get an error with nero then just ignore it and burn it anyways...
Up to now I've always been fine with DV avi files.
But recently Ive been getting these unsupported file error messages. I changed the priority of that thing to +2 and it worked. But now its stopped having an effect. I just dont understand it all. Is there a patch for me to get?
When converting several of my avi files into mpegs, the audio slowly trails until there is almost a second gap in between. The original file has no gap in it, therefore is this a problem with my computer, or TMPG itself?
No it"s probably not Tmpgenc but the file you are encodeing,With avi files the audio and video are Interleaved so the Video is locked to the Video stream so if the Video allways plays at the same speed as the audio But whan you encode the file to mpeg the audio gets stripped off and encoded and the video gets stripped off and encoded, so there for they aren"t locked to the same time code anymore, and the audio will go on playing the same speed as it should but the video goes by it"s own time code based on the Frame rate which can be slightly different than the audio..So that is why gradual sync problems happen when encodeing AVI files..There isn"t very much you can do about it accept there is a Chance you can use something like "Sound forge" and use it to take the audio and either shrink or stretch the audio to fit the exact length of the video file...
Problem A/V desync over time is digitizing with an Audio unlocked
device (ie DV/D8 camcorder - nonprofessional grade). Canon MiniDV
camcorders slide about 3 sec per hour, Sony about 1/10th sec per hour.
Solution: Canopus ADVC-100 with locked audio, $295. Worked for me -
PERFECT SYNC over time. And I was pulling my hair out thinking it
was a S/W problem...
On my friends TMPG the menu screen has an additional option...as well as VCD, SVCD and DVD, there is "Other" which allows him to set the length of the film so that a whole film can fit on an 80min CD. Where can I find it?
It doesn"t Exist..Not if I understand what you are saying, do you mean in the Wizard were you choose if you want a VCD/Ntsc/Pal or a SVCD/Ntsc/Pal or a DVD/NTSC/Pal???you are saying your friends has another option called "Other"????From what i gather there isn"t a option like this or has never been an option like this..You can allways put a Whole movie on Disk but it will look like Total crap, say a 90minute movie might be allmost Bareable but anything longer won"t be Hardly recognizeable..If there was a Way to get a Whole movie on a CDR with Really good Quality then we wouldn"t need DVD'S.............
this message is for ashy.....first of all, I want to thank you for all the important information you've been giving me thus far, but I have a question....I've never worked with frameserve....can you tell me how to frameserve a movie please? If you need my e-mail address I can give you that..it's regman39@yahoo.com...or if ANYBODY can tell me how to frameserve a movie or how to work with frameserve I'd gladly appreciate it....thank you very much!!!
If you look in the Virtualdub help files it will tell you how to set up the Frameserver. If you need more additional help VCDhelp.com have a walkthrough.
If you still can't work it out I will try and explain.