how do you get the Mp3 for a Movie what's the software that you use?

Hy!
I have following questions:

Can TMPGEnc produce low bitrate Mpeg1
for Internet streaming? <= 400 Kbit

A problem with streaming + vbr:
You can't look to the end of a stream to calculate
the correct average bitrate and playtime.
Does any VBR - Header exist with such infos to solve this problem?
-(Like MP3 VBR)- Or is it possible, that TMPGEnc writes the average Bitrate
inside the first Sequence-header (instead the NON-average bitrate).
Then it would be possible to retrieve the correct playtime without looking to the end of the stream.

thanks!

It can, but why would you want to use MPEG as a format for streaming?
The quality would be totally unacceptable when you could use a better format with a better compression ratio such as WMV and achieve much better quality for the same bitrate.

Also I don't understand what you mean about a problem with VBR and streaming.
The timecode information is in the header of the MPEG, so why would you need to scan to the end of the file to read the play time?

If you want to calculate the correct average bitrate to use for the playtime and file size you wish to create then simply use 2 pass encoding.

Maybe I have got your issues confused, but I answered best I could with what I could decipher from what you posted.

Thank you for the answer!!!

Streaming Mpeg1/2 is important for me as long as my self developed
Java-applet supports only Mpeg1/2. Surely Mpeg4 is better....
But I want primarily test my own applet.

The timecode informations are in the Header?
Where? Can you give me more links to mor informations?

I have only found following timecode informations inside the gop header:
NOT the total playtime length or the total frames, instead
the current playtime of the current GOP Header.
That means: The STARTING GOP Header contains: 0 sec, 0 min, 0 h
The FOLLOWING GOP Headers contains something of e.g.
: 1 sec, 0 min, 0 h
etc.
: 2 sec, 0 min, 0 h
etc.
The LAST GOP Header contains the full playtime e.g.
32 sec, 45 min, 1h

So I must have a look to the last GOP-Header.

If you know of additional header infos, please tell me!

Thanks for the answer.

hey all, got a question about audio.........or the lack there of. i have an avi file that im converting to mpeg2. when i first tried it i assumed that the audio was ac3, and i converted it to wav with virtualdub. but now i still have no audio.im a newbe and very confused. thank you

How big was the WAV after you converted it and what is the length of the movie?

I have a similar issue. I have a 732 MB avi file that I suspect is derived from an original PAL DVD. The aspect ratio is wrong (image is distorted), being somewhere between 4:3 and 16:9. In order to correct the aspect ratio I selected an original aspect ratio of DISPLAY 4:3. The m2v file (3.24gb)displays the image correctly but the wav file, which is 1.026gb plays for only 5 seconds. The total playing time should be about 1hr and 26 mins.

Any suggestions? Is this a function of the change in aspect ratio?

I was able to find same problem by other user on this board, but the issue wasn't resolved. So I figure I'll post my issue in a new thread to see if anyone knows the problem!

I am having problems cutting an MPEG into 2. (1.2GB MPEG, attempting to cut into 600~MB MPEGs)

Here is exactly what I am doing;

TMPG - File - MPEG Tools... - Merge & Cut tab - Add button - (browse and select MPEG) - Edit - Move slider bar to half of movie, preview window shows the middle of the movie, but the time (lower right corner, a.k.a. range) shows 00:09:00. (If I click the play button, it simply counts from 9 minutes up) If I move the slider bar to end of movie, it displays 18 mins. I select the first half of the movie and click 'OK'. - Click Run - it extracts a 80MB file of the first 9 minutes of the movie.

This happens on multiple MPEGS - some of which I created via TMPG others I haven't.

Also, there are some MPEGs it works fine on cutting!

Heres a side note to the problem I posted above.

If im in "Edit merge item" screen (where you select where to cut the movie), If I play the movie from the beggining, the movie plays. At about 9 minutes into the movie, the slider bar appears to be about halfway. At about 18 minutes, the slider bar appears to be at the end and the timer stops counting (stays at 18 minute) yet the movie continues to play. If i manually click the slider bar to near the end, the movie actually jumps to near the end but timer shows about 18 minutes. (If I click the slider bar in the middle, it actually shows about the halfway point of the movie, roughly 60 minutes into the film, but the counter on the screen shows 9 minutes.

Hope someone can help, i'm really stuck on this one :(

Heres a side note to the problem I posted above.

If im in "Edit merge item" screen (where you select where to cut the movie), If I play the movie from the beggining, the movie plays. At about 9 minutes into the movie, the slider bar appears to be about halfway. At about 18 minutes, the slider bar appears to be at the end and the timer stops counting (stays at 18 minute) yet the movie continues to play. If i manually click the slider bar to near the end, the movie actually jumps to near the end but timer shows about 18 minutes. (If I click the slider bar in the middle, it actually shows about the halfway point of the movie, roughly 60 minutes into the film, but the counter on the screen shows 9 minutes.

Hope someone can help, i'm really stuck on this one :(

Heres a side note to the problem I posted above.

If im in "Edit merge item" screen (where you select where to cut the movie), If I play the movie from the beggining, the movie plays. At about 9 minutes into the movie, the slider bar appears to be about halfway. At about 18 minutes, the slider bar appears to be at the end and the timer stops counting (stays at 18 minute) yet the movie continues to play. If i manually click the slider bar to near the end, the movie actually jumps to near the end but timer shows about 18 minutes. (If I click the slider bar in the middle, it actually shows about the halfway point of the movie, roughly 60 minutes into the film, but the counter on the screen shows 9 minutes.

Hope someone can help, i'm really stuck on this one :(

Yikes!! Sorry for the duplicated posts, not sure how I managed to do that.

How do you open rm file with AVISynth? Is it even possible?

Download and install Realmedia alternative then use 'Directshowsource' in a script like the one below.
http://www.codecsdownload.com/cgi-bin/TopDown/download.pl?file=0053



DirectshowSource("E:movieReal_Media.rm", FPS=29.97)

'FPS' is the frame rate of your movie.

Sorry about the link try this one instead:
ftp://www.powen.com.pl/pub/Multimedia/RealPlayer/realalt123.exe

I am trying to encode a video file to MPEG-2 that was originally encoded with DivX 5.0 at a resolution of 448 X 336 (4:3) but I get "scan line index out of range (336)" error. What is the maximum allowable value of the input file height and do I have to reencode to this coarser resolution with DivX before I can encode to MPEG-2? I also tried encoding with NTSC 16:9, which I have used before on input files that were 640 X 352 (~16:9), even though I know the output file would be "squashed vertically", just to see if it would work but got the same error. Has anybody else encountered this error and how did you work around it? Any helpful comments would be appreciated. Thank you.

Open the AVI in Virtualdub then frame serve it to TMPG.

I am trying to put together a family video that has 6 clips. The overall file size limit isn't exceded, (its about 4gb) but when I have the program make a folder with the VOB's in it it always cuts the last video clip down to about 1/4 it's correct size. All the other clips are fine, the menu works fine, what is happening?

BTW: I like TMPGenc because it's easy to learn, makes menus that work and above all has a play all feature.

Thanks

My source file (xvid) is detected wrongly as 30 fps by TMPGEnc 3.0 Xpress.

TMPGEnc 2.5 detects 25 fps as does virtualdub and VideoToolbox.

I am unable to change the frame rate setting as it is grayed out, so I am forced to use TMPGEnc 2.5 instead.

Any solution?

Guess not. This bbs really moves! I'll answer my own question.

The encoder is not in error. It is the VFAPI reader:DirectShow Multimedia File Reader that is at fault. So what is this crap and how do I fix it?

I'll answer myself next month no doubt.

http://www.doom9.org/Soft21/Filters/ffdshow-20040808.exe

Sorry, forgot to say:
I had the same problem, I installed - ffdshow from doom9.org, and it fixed the problem:
http://www.doom9.org/Soft21/Filters/ffdshow-20040808.exe

Thanks, that fixed it!

I had the same problem for xvid movies and for some divx movies. I installed - ffdshow, and it fixed the problem.

What does AviSynth do? How does it work with Tmpgenc? And why can't I load .avs file with Tmpgenc?

http://avisynth.org/

When I played the avs file I get only color red, yellow and blue. Is that suppose to happen?
Here's my script:

AviSource("c:AnimeNaruto1Naruto - 01.avi")
ResampleAudio(44100)
LanczosResize(720,480)

No, try Directshowsource instead of AVIsource.
If it still happens then stay with Directshowsource and install FFDSHOW then try again.

Thanks it work.

I want to put a set of 22 AVI files onto standalone DVD playable discs, but am unsure as to the best way of going about this. Each file is ~45 mins long with the following AVIcodec stats: (where Video/Audio MB and Kbps vary slightly)

File : 349 MB (349 MB), duration: 0:43:05, type: AVI, 1 audio stream(s), quality: 59 %
Video : 297 MB, 964 Kbps, 23.976 fps, 624*352 (16:9), XVID = XVID Mpeg-4, Supported
Audio : 52 MB, 168 Kbps, 48000 Hz, 2 channels, 0x55 = MPEG Layer-3, Supported

I could make huge DVD files and do 1 episode a disc, but I'd rather shoot for something more like 6 discs.

What would be the ramifications of putting files through the DVD wizard and reducing the average video bitrate (so I could fit more files,) versus having them go through the VCD wizard where even at the max bitrate I could fit several files onto 1 DVD?

Thanks for your help; I DO appreciate it! =)
--DanielShawn

If you are intending to put 6 AVI's on one disk it would better to encode to VCD format and use a VBR method. I strongly suggest using 'Constant Quality(CQ)'.
If your DVD player can handle it then use a Min bitrate of 0 and a max of 3500 with the Quality set at 100% and an audio bitrate of 160Kb/s. This should allow you to easily fit 6 45min movies on 1 DVD with pretty good quality.

If you simply encode to DVD format and reduce the bitrate you will likely find a shortfall in bitrate leading to artifacts such a blocky video which is more unpleasant than a slightly less sharp image.

As an alternative you could encode to MPEG2 using the Half D1 format which is 352x480 and will maintain more of the quality of your original AVI and will give better results than VCD at the cost of file size.
Min - 1500 Max 3500 and Quality - 65 and an audio bitrate of 160Kb/s should allow you to fit about 5 AVI's on one disk.

If you do go down the Half D1 route then make sure you use '3:2 pulldown when playback' under 'Encode mode'. Don't encode straight to 29.97fps. This will cause jerky playback and increase the file size unecessarily.

I want to put a set of 22 AVI files onto standalone DVD playable discs, but am unsure as to the best way of going about this. Each file is ~45 mins long with the following AVIcodec stats: (where Video/Audio MB and Kbps vary slightly)

File : 349 MB (349 MB), duration: 0:43:05, type: AVI, 1 audio stream(s), quality: 59 %
Video : 297 MB, 964 Kbps, 23.976 fps, 624*352 (16:9), XVID = XVID Mpeg-4, Supported
Audio : 52 MB, 168 Kbps, 48000 Hz, 2 channels, 0x55 = MPEG Layer-3, Supported

I could make huge DVD files and do 1 episode a disc, but I'd rather shoot for something more like 6 discs.

What would be the ramifications of putting files through the DVD wizard and reducing the average video bitrate (so I could fit more files,) versus having them go through the VCD wizard where even at the max bitrate I could fit several files onto 1 DVD?

Thanks for your help; I DO appreciate it! =)
--DanielShawn

Having used the Tmpg Encoder some years ago (and the many different update versions) I am surprised by the volume of problems that continue to be asked about by users.

Is this the fault of the encoder or the user? Since the programmer's encoder should have had all the faults ironed out ages ago I doubt that the program is at fault. So what is the cause of the "problems"? Okay novice users are bound to have teething problems with any new software they've installed on their computer but in essence they should only be minor hiccups!

TmpgEnc.net offers a 21mb sample movie and this even caused me to say b....... to it since it would have taken a while to download! Perhaps a better approach should be made at providing usable/viewable HELP training on line. These wouldn't be particularily hard to create and I find it strange that there is no such link on the FREE program to a HELP on-line.

Come on TmpgEnc.net get your act together - you've had plenty of time to create a training or a Help section of your own.

SoftDeko Software Database
http://www.SoftDeko.com/

.. I know I'm not any type of administrator, but stupid complaints probably isn't the point of this board. :P