I just installed a gtx 1050TI on my work computer PC (windows 10 64 bit), downloaded and installed all drivers. The computer and every other program sees the new GPU but TMPG does not see it and wont allow me to look in the preferences to speed up the output in the NVIDIA tab. I have an intel i7-4770 with 16 gig of ram and more free memory than I can shake a stick at. Does anyone know why it wont recognize the new hardware or is there a plug in that I need? Thanks for your help
Go to the Menu editor, click on the Global Menu Settings button. Go to the Motion Menu tab, make sure one of the Motion Menu options is selected, then the option for "Delay Duration for Highlight" should be enabled. This option delays the appearance of the highlights so they can appear after your menu has fully faded-in. Just set the duration to the same duration as the fade-in.
I am looking for a way to change the source video in a project. I created a full dvd layout with a .mpg file and want to apply all settings to a .m2v file of identical length. It is the same video exported a different way from Premiere. Is there a way to do this without having to create the layout again from scratch?
When editing dvb-ts programs the software can obviously see the subtitle sub-picture stream as it can 'burn' this into the output picture when encoding, however, it would be more useful to have this stream as a separate part of an MKV container as it could then be switched on or off as required. If this isn't possible how about a simple option to save the stream to disk for further processing.
I've burn about 15 BD discs (25GB and 50GB) and I noticed that, although the disc has been burnt without problems, in some of the movies I've burnt there are missing frames every minute more or less. I mean, you can see a little jump in the movie. The original file doesn't have anything like that, you can see it perfectly. And of course I've adjust the frame bitrate before burning the disc, I check if the file is 23 fps or 25 fps etc and I adjust it in the program.
I wonder if the error could be that I was using other programs while burning the BD disc and in the output process. I always burn discs at mínimum speed to avoid problems but still there is something that sometimes goes wrong.
This is a question I am also interested in. I am waiting to buy version 7 because I don't want to spend the money twice. But I never saw an official statement of pegasys, beside release notes there ist not much communication from the company.
For version 6 it took roughly have a year for an English/German version (Japan release 19. December 2014, English relelase 14. May 2015.
Japan release of version 7 was 27. November 2018, so I have hope that the western version is coming soon...
The Blu-ray specification allows for authoring mixed media discs. Mixing PAL material on a NTSC disc is allowed and works in Adobe Encore.
In TAW6 i can mix 720p50, 1080i25 and 1080p24 without issues/re-encodings. But, if i create a new project and try to mix 1080i25 and 1080i30 TAW6 will force a re-encode of one of the two files depending on the mode you choosed when you created the project.
If i create a PAL project and import 1080i25 and 1080i30, TAW6 will re-encode the 1080i30 material to 1080i25. If i create a NTSC project and import 1080i25 and 1080i30, TAW6 will re-encode the 1080i25 material to 1080i30.
There are two problems here:
1. The Blu-ray specification do allow 1080i25 and 1080i30 to be authored on the same disc.
2. Converting framerates simply don´t look good, so this bug must be fixed.
The source footage is created by Premiere Pro CC2019 using the TMPGEnc Premiere Pro Plug-in. I can mix the same 1080i25 and 1080i30 footage in Adobe Encore.
I believe the Blu-Ray spec does NOT allow mixed formats within the same TITLE - hence why one of the files is re-encoded and isn't a problem with the software.
To get around this, simply create a second TITLE and add the second file to it. As long as all the files in each title have the same format and resolution, normally no re-encoding will be needed (unless none of the files match the Blu-Ray standard!)
I've done this several times when you want to add a mixed set of files to the same Blu-Ray or DVD. Create as many titles as you need (up to a maximum of 99 on a DVD and, I think, 199 for a Blu-Ray). Creating the menus for multi-title discs is slightly different to adding everything to the same title, but is easy to figure out.
Roger, I should have read your question more closely. It's also difficult to establish what exactly is contained in the Blu-Ray standards!
For HD video, PAL or NTSC should theoretically be irrelevant because of course HD doesn't use either. Because of this I've often wondered why, in TAW, you have to select PAL or NTSC for a blu-ray project, other than if you're adding standard definition content that actually is encoded in PAL or NTSC form. I presume this is a hang over from creating DVD projects, which, as you say, can only be one or the other.
I still don't think you can mix video of different standards, resolution, or framerate etc in the same track without some of the files needing re-encoding. If Blu-Ray supports both PAL and NTSC on the same disc, my guess is this should be allowable at the Track level, but not mixed standards within the same track? (OK, previously I said "Title" - more correctly I should have said "Track").
I am using a separate clips for each Track in TAW. I never add more than one (1) clip to a Track in TAW. Mixing PAL/NTSC footage in one Track would naturally cause issues/re-encodes. The odd thing is that some PAL/NTSC are ok to mix in TAW6 as i wrote in my first post so to me it indicates that it is a bug since some combinations of PAL and NTSC footage in separate Tracks are O.k though the BD standard can be mixed, be it HD and/or SD.
I tried to trick TAW6 by replacing clips in the BDMV\STREAM folder but that don´t work as expected. If i create a PAL project with two Tracks, one Track with PAL clip and one Track with NTSC clip the NTSC clip will be re-encoded to PAL. If i then do a new NTSC project with the NTSC clip and then swap clips in the BDMV\STREAM so i have one PAL clip and one NTSC clip in that folder there is some metadata that force the Blu-ray player to playback the NTSC clip as some kind of PAL. The player report that the NTSC clip is PAL as well.
If i create a BD-disc in Adobe Encore with the same PAL and NTSC clip my Blu-ray player will report correctly, iow PAL for PAL and NTSC for NTSC.
I hope this will be corrected in a future update of TAW. :)
hi im trying to capture video clips from a panasonic hdc-hs25 hd cam with my tmpgenc5 sw but it's not letting me capture more than 200 clips. anyone know if newer version (6) of sw can do this? or how i can do this with tmpgenc 5?
I think 200 is the limit for version 6 as well.
If you can combine them into one video, that could work. In other words, import 200, output as one video, then create a new project with the rest of the clips and the combined clip.