Hello,

I keep on having read/write errors,
errors on P3Package.dll, etc..
this problems occurs in most avis i am trying
to convert.

First of all, i know this point is not a tmpegenc
bug, as i am using the program for months
and it worked perfectly.

But for weeks now i can't encode anymore.

I guess i have installed some crappy codec
or something like that.


On the other hand this bug looks like
a bug you can have with a bad ram.
(errors on memory sectors)

My ram is cheap and i was wondering
if i could come from that.

So here's my question :

i am pretty sure a lot of people out there
have or had the same problem.

So, people, if you have found the problem,
what was it : bad ram or crappy codec ?

thanks

I don"t think it is a Codec But it sure can be Cheap Ram, if you have 2 different Brands of Ram try takeing out the Cheap Stick and see if it works...

Well,
I have tested my ram with a real god product, mem test 86,
which is working (it detected a lot of errors on another
ram i had).
It says my actual ram is OK.

I just have one RAM so i can't be a two rams problem.

The annoying thing is that I have used TMPegenc for months
without any problem. :(

This problem occurs on every avi.

I have tried other known products and...
they hanging too....

so :

> it is not a TMPEGEnc bug

I am on Win2k

So i have tried to run tmpeg enc on another
OS, ( windows 98 )
a fresh one, clean as it can be, and ...
the same problem occured.

I have tested those avis for bad frames, bad sound
but no results.

I am thinking that maybe my CPU is getting weirdo
when it works hard for a while..

Or maybe it is because i use a software to cool down
the cpu....

Well, i don't have any clue. :(

This is too bad.

How i am going to make vcds out of my vacations
videos now ?

Same problem here. TMPGEnc often shows read errors.

I tested the same file again many times. Sometimes TMPG encodes it without any problems. But often it interrupts encoding with an read-error. I don't want to disable those "MMX" or "MMX2" option, because it speeds up encoding a lot. And even with disabled "MMX" TMPG interrupts encoding sometimes. :(

AMD XP 2000+, 256 MB, WinXP

Same here : Athlon 2000+,256 m,win 2k

i am searching infos everywhere on the web about this but i can't
get a clue...

i am thinking of trying an older version of tmpeg
to see if it works...

tell me if you get infos :)

I'm having a problem. Everytime I convert an AVI to a MPG the convertion goes fine. However, I can not see the picture it is completly black but the audio works fine. I have tried many different setting as well as MPEG-1 and MPEG-2. What is the deal? Why can't I get a picture? Thanks.

If you can"t see the image as you are encodeing then there isn"t going to be an image in the file, Try raiseing the Priority if the "Direct show file reader" in the "Vfapi Plugins" this should get the image to show up...

Try to uncheck the avi2 line (prior 0), it could resolve your problem

hI,

cAN ANY1 ADVISE ME THE BEST WAY TO CONVERT FILES TO VCD FORMAT. i CURRENTLY USE TMPGE FOR ENCODING DIVX FILES TO MPEG THE SPILT THE FILE INTO 2 SO IT WILL FIT ON TWO DICS. HOWVERE WHAT CAN i USE TO CONVERT THE MPEGS FILES TO VCD (NOT NERO). (EASY WAY PLS)

MANY THANKS.
DESTINY

The first suggestion I can gave you is to stop using CAPs to write your message or have your posts removed.

Secondly why do you wish to not use NERO for creating VCD?

ASHY

VCDEasy is Fairly good, But there is No Converting the mpeg to VCD the mpeg IS VCD and just needs to be burned to a CD-R...

Well technically speaking an MPEG is not a VCD until it has been burned into the correct format on disk, but I understand where you're coming from Minion.

ASHY

Destiny - are you using the correct template within TMPGe ie PAL or NTSC VCD??

All you need to do is then drop it into Nero - works every time.

Al

I took a AVI file with audio and video and put it in the wizard to create a mpeg file. TMPG askes to select both a video and a audio input, I select my input avi file and generate the mpeg. The output doesn't have any audio.

Any ideas?

I took a AVI file with audio and video and put it in the wizard to create a mpeg file. TMPG askes to select both a video and a audio input, I select my input avi file and generate the mpeg. The output doesn't have any audio.

Any ideas?

try and extract the audio with VirtualDub before you use the TMPGEnc wizard, and then select the WAV file as your audio

only one i can think of :)

hi im using the latest version of tmpg. Im decodeing a xvid avi to mpeg1 and when i hit start i get this error. write error occurred at address 004028a9 of module tmpgenc.exe with 008d270c

can anyone help.

Hi all. I have a problem converting a avi to mpeg1. The avi plays great but when I use TMPGEnc to convert to mpeg the video cuts out about 1/2 hour through. I have tried spliting the audio from the video using VirtualDub, and then bringing them together in TMPGEnc, but with the same result. The video I extract with VD plays ok. I'm not sure why TMPGEnc would cut out the video after 1/2 hour, and the audio plays on. Thank for any response....

Midnight

Have you tried Raiseing the Direct show????

hi there

I just want to know if there is any way of cutting out the bad data/frames in an avi file

This is because of the reason that when I try to encode the avi file to mpeg1 for then putting on a vcd, it sometimes fails. I have found that the files that dont actually work seem to be the ones with errors in the file (i scanned it with some program that i found somewhere)

Anybody shed any light on this??

Cheers, ^X

You use "Virtual Dub" to scan for bad Frames, then you mask the selected frames then you can either make a new File useing the "Direct Stream Copy" with the bad frames masked or you can use the Frameserver with the Bad frames masked, you should be able to find these settings in V-Dub...

I use this guide ...

http://screw.wz.cz/avidef/AVIDeFreezer%20Tutorial.htm

thx... but the link on the site doesn't work :(

could you possibly mail me avi efreezer program thingy pleaaaase.... or msn/DCC it on IRC or somethin

i could host it for more people to use then :)

but atm, i am stuck since the link doesn't work :(

Cheers, Chris.

Have you never heard of a search engine? It's not to hard to find!

ASHY

Oh and by the way the link does work. Just copy the whole link and paste it into your browser. Direct clicking wont work because the last part of the link isn't recognized by this page.

ASHY

Hi,

I a currently have the following problem.

When I play a VCD Dics in my DVD player it comes out all Blocky (colour & sound seem to be ok). However when i play the dics in my PC is fine.

I currently use TMPG to convert Divx to MPEG then use Nero to conver to VCD format and burn onto Disc. Cany any 1 help me please.

Thanks

Destiny.

Are you saying that you are encodeing your files to mpeg then useing Nero to convert them again to VCD??? If this is so then No wonder you are haveing bad Quality movies, After you have used Tmpgenc to convert the files to Mpeg1 there is no More converting left to do, you simply have to burn the Mpeg1 file as a VCD, If nero is converting the Mpeg files again then you are not doing it right in Tmpgenc..Mpeg1 is the exact same format that VCD"s are so Nero should not be converting the files again, Plus nero is the Worst Mpeg converter there is..VCD is a Very Low Quality format anyways so even if you do everything correctly with Tmpgenc you can still end up with Low Quality movies ...

Nero is the worst software ever to plague the Earth. Not just with VCDs.

What are you talking about. Nero is the best burning software there is. It's only simpletons who don't have a clue how to use it that complain about it.

ASHY

When ever I try to convert I file to .mpg, there is always an illegal operation error when I click on the 'start' button to convert. I have downloaded the new version and this still happens. It doesnt matter what file type I try to convert.

Help.

I changed Avi-> Mpeg-1 to see it in my DVD player which recognizes VCD format, but after encoding, I could not see anything but moving cube when I saw it by using viewing program in my compute, and my DVD player can not recgonize it.

Also, I can not see the preview during encoding, even I checked up the preview menu.

Would you please let me know what is wrong, and tell me the exact order to conver and manual?

Thanks

You might just need to Raise the Priority of the "Direct Show File Reader" to "1" or "2", and if you do not see the file while encodeing then there will not be a Picture in the file...

I'm encoding and avi file to MPeg 2 and the audio can be either 44 khz or 48 khz. Then I multiplex using the Mpeg 1 (non-standard) heading. All works fine on the PC but on my stand alone DVD play the audio is way out of sync and gets progressively worse. Is there any way of correcting this problem or any suggestions I can try?

Technicly speaking the Audio Can NOT be 44100hz or 48000HZ it Has to be 44100HZ for it to comply to VCD/SVCD standards...First make sure that the file is In sync before you Change the header..Then Try useing the "Merge & Cut" instead of the "Multiplex" to change the header, I have allways had better luch useing the "merge & Cut"....

Never thought of using Merge and Cut - I'll give it a try. Thanks

>I'm encoding and avi file to MPeg 2 and the audio can be either 44 khz or 48 khz

What do you mean by this? The audio HAS to be 44.1khz nothing else or there will most likely be problems.

ASHY