This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
have been using hauppauge's winpvr 250, and while it's not perfect, it does seem to be a fairly decent "ripper"... at the same time, we're using tmpgenc plus (on the trial basis) and would like to purchase it, except for two things:
.1. it loves to crash on what i believe are "probably" bad frames (i have no way of checking this, but it's most likely option) and, once crashed, i have to re-enter the data one more time. if i hit that frame again (bloody likely, as they are usually at the setpoints), i crash again... frustrating... this only happens when the previewed file is NOT moving (paused). if the file is moving (playing), the frames are either un-noticed or handled differently; in either case, setting a setpoint while the target is moving is quite annoying and any miss that hits those frames makes the program go kaboom...
.2. we cannot convert successfully from the hauppauge format (fair ntsc mpeg 2) to any other format except mpeg 2 vbr. tmpgenc says it does the conversion, but what we get is audio only, no video. place the file into gspot, and gspot says everything rendered fine, all codecs are in place, no worries...
is there a way around the bad frames issue? i've spent as much as an hour attempting to refine my setpoints to where i am getting data on either side of the real setpoint (irritatingly annoying) because the program will crash completely if it so much as touches the setpoint when the program isn't playing the file (preview)...
someone else suggested that tmpgenc keep the setpoints around for later editing. i think this is an excellent idea, and should be easily implemented...
Your Post is Quite Confuseing as your Terminoligy does not make much sence..But From what I understand you are Haveing Problems encodeing mpeg files that you have Captured from your WinTV PVR.. I am also assumeing most of these Files are Mpeg2 files that you are Trying to encode with Tmpgenc?? The Best method For encodeing Mpeg2 files in Tmpgenc is to Frame serve the Mpeg2 files to Tmpgenc with a Program called "DVD2AVI"(Freeware)..You Load your Mpeg2 file into DVD2AVI and then go to "File" to "Save Project" and it will leave you with a D2V file and a Mpa audio file..You then Load the D2V file into Tmpgenc as the Video source, and if you are Makeing a Vcd or a SVCD then you do not have to encode the audio as it is allready in the correct format for VCD or SVCD and re-encodeing it would just lower the audio Quality..Now just encode the D2v file to the Mpeg format that you want and after encodeing you can Multiplex the Video file with the Audio file useing the "Mpeg Tools" "Simple Multiplex"..This method is the Most reliable and fastest encodeing method for encodeing you captured Mpeg2 files to Mpeg....
PS: if there are "Bad Frames" in your Mpeg2 file DVD2AVI will not make a D2V file and in that case there is Probably nothing that can be done with your Captured files...
For many weeks i've never had any problem using Cladvd and tmpgenc to convert a DVD in VCD.
Since i've downloaded cladvd .xp and tmpgenc 2.511 nothing works.
Even reconverting old "ripped" films doesnt work : tmpgenc says it doesnt recognize the video format.
Hint : in the first dialog of tmpgenc it is written in red : "MPGEG 2 trial period has expired"
Could any one give me the exact list of things to do ?
How are you Encodeing these Files to VCD?? are you just loading the Vob files into Tmpgenc and encodeing them to VCD??? if so this is not the best way, it is best to use "DVD2AVI to extract the correct audio stream and to make a D2V project file that you can encode in Tmpgenc to VCD..This method is faster as DVD2AVI has a Faster Mpeg2 deocder than Tmpgenc ..But since You didn"t explain how you were makeing your VCD"s I can"t tell you what is wrong...Cheers
CladDVD XP uses DVD2AVI to frame serve to TMPG. This will be the source of the problem.
Try re-installing CLadDVD first. If that doesn't work download and install the latest DVD2AVI then copy the DVD2AVI.vfp from the DVD2AVI folder in to the TMPGENC folder.
Check in the VFAPI plugins to see if the DVD2AVI project file reader is listed and if necessary raise it's priority.
If you still have problems you may need to download an earlier version of DVD2AVI v1.76 and follow the steps above again.
Well I doubt it,Probably due to Liscencing matters, or to the fact that RM is a Crappy format, But if you want to encode Rm files there is One Encoder I know of that encodes RM Files to Mpeg and that is called "EO_Video".....cheers
>Well I doubt it,Probably due to Liscencing matters, or to the fact that RM is a Crappy format, But if you want to encode Rm files there is One Encoder I know of that encodes RM Files to Mpeg and that is called "EO_Video".....cheers
Thanks for the suggestion, I've used EO Video, but it is slow and produces low quality video. Do you know any other SW tool(s) can convert RM to MPEG?
>Come on get with it. RM is more or less a dead format, so what would be the point?
The point is there are million of RMs available online, and I don't want to watch them on a small computer 21" monitor; I prefer to convert &burn them on DVD, to watch on my 50" plasma TV.
>The point is there are million of RMs available online, and I don't want to watch them on a small computer 21" monitor; I prefer to convert &burn them on DVD, to watch on my 50" plasma TV.
The point is these RM's just look just crap when played on anything bigger than a 17" monitor and even worse on a 50" inch TV such as a high definition Plasma, so why bother?
Don't tell me you have actual movies in this format. Anybody that uses RM for proper movies needs a check up from the neck up.
>>The point is there are million of RMs available online, and I don't want to watch them on a small computer 21" monitor; I prefer to convert &burn them on DVD, to watch on my 50" plasma TV.
>
>The point is these RM's just look just crap when played on anything bigger than a 17" monitor and even worse on a 50" inch TV such as a high definition Plasma, so why bother?
>
>Don't tell me you have actual movies in this format. Anybody that uses RM for proper movies needs a check up from the neck up.
Like I said before, million of RM movies can not be ignored, moreover since some of the movies are currently avaiable only in RM format.
Hello, I record from a Super VHS VCR to my Panasonic DVD Recorder onto a DVD-RAM disc. I then take the DVD-RAM disc and put it into my Toshiba DVD-ROM in my computer to copy the video file (.VRO) to my hard-drive. I then use TMPGENC DVD Author to edit, create, and compile my DVD project. A random problem I'm encountering is that when I'm editing the .VRO, some parts of the video file appear with as a half screen on the editing screen. This happens randomly with different videos. When compiling my final project, the motion chapters appear as a split screen as well. What exactly is causing this and is there a solution to this problem? It is very irritating seeing my final project come out this way. Please let me know if anyone else has been able to resolve this problem. Is there a future fix coming out?
Try switching "Hybrid VBR Resolution" on your Panasonic recorder from Automatic to Fixed when recording RAMs for PC editing. That should solve your problem. See also:
bbs.pegasys-inc.com/bbscgi/ebbs/board.cgi?board=tda&page=0#topic206
What is a good bitrate to set for a non-standard mpeg file? This must be based on the CD speed but how do they relate, is it 150K per speed of cd eg 16 speed is 16*150k 2400K
I am having trouble re-coding from a XVID encoded AVI, I can get Video Aspects ratio OK, but No sound at all, Any suggestions?
I'm using Latest 2.520.54.163..
Glenn
Question - TMPG close when starting to encode on XP No.38862
LG ( Mail ) 2003/08/31 (Sun) 03:56 ( ID:erf0.muwo/h ) [ Edit / Delete / Reply with quotation ]
TMPG is able to start up on my Windows XP system. However, when I trigger an encoding task, it simply close totally; not in the task manager at all. Any advice? Thanks.
--------------------------------------------------------------------------------
VideoGuy 09/02 (Tue) 10:58 ( ID:4yfrh0hqv72 ) [ Edit / Delete / Reply with quotation ]
I have experienced this problem before on a Win 2k machine. TMPGEnc is crashing most likely due to a codec problem. It might help if tried to reinstall the particular codec. If you post what codec your file is encoded with perhaps we could give a more specific answer.
Sorry too fast with the button. I'm LG. I've followed some advices below. However, my avi file is still not recognised. I've used G-Spot to check out the avi format. It is OpenDML, so I promoted the OpenDML "Vfapi Plugins" to priority 2, still not working. Any other ideas?
--------------------------------------------------------------------------------
Minion ( Mail ) 09/01 (Mon) 17:17 ( ID:w8yn5mktf8w ) [ Edit / Delete / Reply with quotation ]
For this Error all you Usually have to do is go to "options" to "enviromental Settings" to "Vfapi Plugins" and Raise the Priority of the "Direct show File Reader" to "2" ...This will Usually get Most AVI/Mpeg4 formats to load in Tmpgenc....Cheers
I have a problem with the number of channels which TDA writes in the ifos of the final Disk.
My source files are all in Dolby Digital 5.1 when I make a DVD out of this files the Channel Number in the Video_Ts.ifo and the VTS_01.ifo are only 2. Some DVD Players have problems to play the full sound if the number of channels of the source isn't equal to the number of channels which is provided by the IFOs.
With TDA (unlike other home dvd authoring tools) it's possible to "mix" vids with different audio types - there may be tracks with ac3 5.1, ac3 2.0, LCPM and mp2 on *one* DVD. So IMHO there can't be a correct "global" channel number in VIDEO_TS.IFO, instead this is set in every track IFO (VTS_*.IFO).
I think any channel numbers found in VIDEO_TS.IFO set only the audio channels of menus.
If you want to remove Bad Frames from a Mpeg file you will probably need a Frame accurate Mpeg editor like Mpeg2VCR, But be warned that Bad Fames in a Mpeg file can Mean the whole file is Corrupted....
I'm having trouble making a DVD from mpeg files (in vcd format). I'm using the version 1.5.13.44.
The mpeg plays fine in Media Player, but there is a small "glitch" (looks like a few frames are "skipped").
In 'Chapter Cut Edit' there is no thumbnails of the frames after this "glitch" for several minutes. As a result the .vob file is only 90 MB instead of 440 MB (the video stops at the "glitch").
Does anyone have any suggestions what I could do to solve this?
I tried converting a couple of other mpegs (vcd) to DVD and they worked fine. Is TMPGEnc DVD Author really this "picky" about errors in the mpeg?
i have the exact same problem, VCD plays fine in powerdvd etc, cant get the mpeg into the dvd pack..im currently recoding the mpg with tmpgenc, to see if i can use the recoded file..ill keep u posted :) (has quality loss though..)
k dude, it worked, recoded a .mpg to the same format it was originally, and the file worked...does have a bit of quality loss, but at least u could finish your dvd :) (if u have 10 episodes on a dvd for example. ) Talking about making a backup ofcourse.. :)
If you wish to use the vcd files. Use Isobuster (freeware) to extract the vcd files to mpg. TMPGEnc DVD will only need to re-encode the audio to 48000Hz.
Worked fine for me.
If you want to convert a file from VCD, that could be OK. But I think it's not necessary. Remember, a VCD-file is not really an MPEG-file. It's a DAT-file, which can be interpreted as an MPEG. But the header is not correct for MPEG; it's a RIFF-header. All you have to do is change this header. Could be done with VCDEasy. I had this problem with the "Cure Show"-VCD. Works fine now on DVD.
It is Probably because your AVI file has an audio format that is Not supported By Tmpgenc(VBR Mp3 or AC3) you will have to extract the audio from your AVI file to Wav format and use the Wav file as your Audio source....Cheers