I have been to get DVD Author to create a disc that will only do these things when I put it in a player:
1) Display a single menu
2) Only play the chapter the chapter I select and press play on.

I've tried different combinations of Menu Options and no matter what I do it:
1) Displays the menu. Good
2) Plays the chapter I select. Also good.
3) Plays the next chapter. Bad. I can't get it to stop doing this I want it to return to the track menu.

I tried telling it to only include the track menu because it's stupid to have a main menu with only one selection that points to the track menu.

Any suggestions? I'm really tired of burning this disc to DVD-RW. I want to finish this up by putting it on a DVD-R and reclaiming my 4GB.

That's simple: You can't do that by using TDA. That's a trick, only Authoring-Tools like Scenarist, Maestro or DVDLab Professional are providing (it's called "Playlist").

No disrespect to B_Racer, but what you want to do IS possible with TMPG Author. I found this thread,

http://www.videohelp.com/forum/viewtopic.php?t=207763

and followed johns0's directions and it worked out great for me. I have 4 clips on my main menu that I can select individually,that clip is then played and the DVD returns back to main menu.

-Glen

The only problem is that you must press the "title" menu button on the remote to access the main menu. Pressing the "DVD" Menu (Which I consider the Main menu selection) does nothing. Pressing either should get back to the menu as in other authoring packages. I think this should be corrected.

I captured 60 minutes from my dvcamcorder (using Moviemaker) and got a 12gig AVI file. I used TMPGENC to make a PAL SVCD out of my AVI file.
Picture is okey but audio lags and sounds like it's played with half the speed.
How can I fix this??

Simple answer: Don't use Movie Maker!
And take care about the settings. Movie Maker likes NTSC more than PAL. *rolleyes*

Maybe a stupid question....can I use TMPGENC to capture video from my dvcam instead of Moviemaker? Or do you have any other suggestion?
(I live in Sweden and use PAL)

TMPGEnc does not capture, it only encodes.

I personally use the Ulead products to capture DV. You have to pay for it, but there is a 30 trial. Try it to see if it works. Ulead supports PAL.

There are a couple of free programs that will capture DV video via firewire.
You could try WinDV, http://windv.mourek.cz
A new one is "Avid Free DV", http://www.avid.com/freedv/features.asp

Why do I need the ac3 plugin? I am new to all of this dvd making, and I have successfully made a couple of dvds without ac3 encoding.

I love both the dvd authoring and encoding programs and was going to get the audio encoder, but saw a possible problem.

I am about to move out to the sticks where no high speed internet is available and I will be using cell phones for my phone service. So I probably won't be getting 56k internet service. I'll use my work for internet access.

My concern is, if I get the ac3 plugin, will it become unusable after a period of time. I saw that you would have to update every so often to keep the software running.

How often is the ac3 plugin to be re-registered?

You don't need the Ac3 plugin.
It's only required if you want to encode to Ac3 audio. If you don't need it and are happy with just using PCM or Mp2 in your DVD's then your fine.

Okay, maybe I phrased my question wrong. Why would I want the ac3 plugin?

I have spent a ton of time getting my capture card working right. Sorting through all the crappy dvd making software. I've got everything working great now, so I started looking into the audio side of things.

I'm just curious what advantages ac3 brings. I was going to download the plugin to check it out, but I saw where you had to re-register it every so often. Was wondering how often, a week, a month, a year?

Here is a quick review of the 3 audio formats:

ac3 = 100% compatible with the dvd standard, great compression, up to 5.1 channels, small file size

PCM (wav) = 100% compatible with the dvd standard, up to 2 channels, no compression, huge file size, gives less room for video, can offer the best sounding audio due to no compression but at the cost of video quality for longer movies

mpa (mpeg audio) = not 100% compatible with dvd standard but almost every player can play it, up to 2 channels (there are some mpeg audio surround encoders however), file size comparable to ac3 2 channel.


In my opinion ac3 is a better choice. Some people will say that mpeg audio is good and I would agree. It all depends on what you like and what sounds good to you. When I play mpa and ac3 audio with my speakers on my television they sound the same. But when I play them through my expensive surround sound system ac3 clearly sounds better. It depends on your ears.


If you purchase the ac3 plug-in from TMPGEnc you do have to activate it. When you install it, it will connect to the internet. It's no big deal if you purchased it legally and have an internet connection. In fact you won't even notice it really, it does it automatically.

Just a couple of things to add.

The AC3 plugin only encoded 2 channel audio not 5.1

MPEG audio is infact 100% compatible with the DVD standard. However it is only supported in the PAL specification. Having said this I would say 99.9% of all NTSC DVD players, if not all, will play MPEG audio.

As for compression I would say MPEG and AC3 are comparable as they are based on the same technology.
In my opinion sound quality is comparable also if not sometimes better in MPEG than 2 channel AC3 when using Dolby Prologic systems.
It requires a full Dolby digital decoder to appreciate AC3 as it should sound.

TMPG will encode the MPEG using surround sound, as will any other MPEG encoder, as long as the Wav source has been down mixed to dolby surround from a 5.1 source.
Most applications such as VOB2AUDIO and DVD2AVI will do this as will many others.

ashy is correct about the 2 channel limit of the TMPGEnc ac3 encoder. I was just giving an overview of the formats and did not make it product specific.

In NTSC land, mpeg audio is not part of the DVD standard, so it depends if your country uses NTSC or PAL.

For more information about the ac3 activation visit this site:
http://www.pegasys-inc.com/en/product/tsp_ac3.html

I forgot to add this in my previous post:

If you have no internet connection like you stated, you will run into problems with the activation. In that case, mpeg audio would be a good choice.

@ashy

To be correct:
MPEG1 Layer 2 Audio is fully DVD compatible - in PAL and NTSC. But according to the Specs:
In NTSC-Land it is only alowed as additional Audio-Track, not as Main-Audio-Track. But like you wrote: Nearly any DVD-Player should be able to play back DVDs with MP2-Audio only.
In the PAL-World, MP2-Audio is alowed as Main-Audio-Track.

Thank you for your input guys, this stuff is starting to make a little sense.

i have an avi file using the divx codec that i want to convert to svcd. when I choose the file, it is unsupported. how come some avi files work and some dont? is there anyway to correct this problem?

I have an avi file encoded with divx. WHen i try to convert it, it says that its unsupported. What do I do?

How can you put a startup/opening video in a vcd. This video plays before the main menu is shown.

al

Just put it as the first track in your burning/authoring program.

i'm using Nero 5 and the menu page i created is default in track 1 and wont let me change it. Any suggestion how to do it in Nero or is there a better software?

Oh I see what you are trying to do now.
I don't think it is possible to do what you are asking.
I don't know of any software that can accomplish what you ask or if it supported in the VCD 2.0 spec.

Please CAN SOMEONE HELP

I have just bought a new computer. Installed tmpgenc, copy and pasted my registration number in, but to no avail it says wrong number.
I still have a printed copy of the letter sent when I registard, probably tried to get the nuber in about 40 times now.
I registard about two years ago, anyone got any idea what I need to do?

Dvd author went in ok no problems.

thanks in advance for any help.

Ralph.

Probably because your registration will no longer work in the new version because it has been blacklisted.
You will either have to find the version you had originaly or contact Pegasys for a replacment.

Thanks for the reply.

Could you elaborate on being blacklisted?
it's not a pirate copy I registered it about two years ago.
I also have a registered copy of dvd author, that went in ok

I tried an old version as you suggested. But, the same thing wrong registration number, you don't really need this when you have to reinstall every thing from scratch.

Thanks
Ralph.

Are you using the same version of TMPG you had when you first registered?

@CELTIC YOB
Some of the registration numbers provided on the internet are blocked now, that's what "blacklist" means.
And there are a couple of "right" Codes on the List because they where provided on the Net too.
If you have a purchased Registration Code and you are doing only legal things, mail to Pegasys directly, they will help you on your registration.

On my Dual Xeon system, TMPG sees only 2 logical processors instead of 4. Also, when encoding it is only able to load the system to 50% utilization.

Is there any update or revision that correctly supports Dual Xeon (hyperthreading for 2 physical cpu's) ?

Thank you,
Charles W.

I have a problem!

I'm about to convert a movie in TMPGEnc, from avi to SVCD with subtitles. When that's finished I burn the movie to an DVD. But the problem ouccure when I watch the movie in my DVD-player. The movie have been "pushed up" so I can only use 2/3 of my televison.

I've found out that this only happends when I have subtitles. Not when there's only the movie, without subtitles.

Is there any way you can "cut of" the black line in TMPGEnc??

Two things here.

Why are you creating SVCD if you are burning to DVD?
Why don't you just make the subs selectable by authoring them with your DVD program rather than hard encoding them?

I normally download movie files using emule and bitorrent.

I also have the klite codec pack.

Despite all this, all the avi files I play are all choppy and play very slowly.

I am newbie, so any help on this very much appreciated.

What's the spec of the PC and AVIs?

Bob.

As above but also:
>I also have the klite codec pack.

= bad.

Hello,
I also have the same problems as you and using k-lite codecs. I believe that we both need a larger CPU like a 1.6gig P4 or better to play AVI's properly. It wasdoing this even before I installed TMPNGEnc and k-Lite codecs. Since converting .avi to MPEG the choppiness stopped. MPEGS play fine. That's because AVI's play at @ 1.3 fps and MPEG plays at @ 29 fps. What CPU do you have? Believe it or not I use a P233mmx! It takes foreever to encode AVI's to MPEG's but k-lite's Classic Media Player works great on the converted AVI's to MPEG's. Except for the extremely slow performance(1% per hour!), I also have a problem of converting a 26 min. AVI to MPEG and it says it goes over the CD-R limit of 80 minutes! Please, please if you have received answers to any of your or my problems, contact me at sonatine@cfl.rr.com. I appreciate yor help.

Regards,
Steven


>I normally download movie files using emule and bitorrent.
>
>I also have the klite codec pack.
>
>Despite all this, all the avi files I play are all choppy and play very slowly.
>
>I am newbie, so any help on this very much appreciated.

When using TMPGEnc for merging/cuting mpeg2 files ,if i try to edit the files i got an error message :"Floating decimal point is divided by 0".
I cannot use the edit function.
Anybody to help me.
Thanks

Le Gouli

In the past, I have joined multiple VCD-compliant MPEG files using TMPGEnc, but the result was never VCD-compliant, so I had to re-encode the joined output file _again_ before I could put it onto a VCD. This is very inconvenient, time-consuming, and I presume it degrades the AV quality also.

Has this been fixed in a recent revision of the program, and if not, would you add it to your todo list? Thanks.

This has been a bug in TMPG's muxer for as long as I can remember.
It doesn't create 100% VCD compliant files however most if not all DVD players shouldn't have a problem with it, so what problem do you have.

If you need to create 100% VCD compliant files then just re-mux using the muxer that comes with the Phillips VCD2.0 toolkit. It's muxer is 100% compliant.