This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
When running TMPEng video mastering 5 is it normal to be using 100% cpu.
I'm running windows ultimate 7
2gb ram
core2quad
any reason for 100%cpu which overheats the computer, I get the overheating buzzing noise.I installed a program called speed fan which stops computer shutting down.
This is the only program I have this trouble with.
Please help.
Most people complain when it doesn't use 100% of the CPU (they want it to use 100%). Encoding is CPU intensive and the more of the CPU it uses, the faster the output will be.
Anyway, try lowering the CPU priority and run it in the background.
Speedfan is a program that monitors voltages, fan speeds and temperatures in computers with hardware monitor chips. Do you know the temp of CPU ? It's perhaps a cooling problem...If the CPu Temp temp for a COre 2 Quad is over 70°C you have a problem if they are at 89°C the system shut down...I had the problem with my "old" Core2Quad 9450 when the CPU fan had a paw broke...
you seem to have a cooling issue with your CPU, I have a AMD phenom X6 and when ALL 6 cores are running at 100%, my CPU temps only reach about 48c with the stock cooler. You should REALLY look into fixing this problem as multiple overheats will reduce the life of your CPU. Check your BIOS setting to make sure the the voltages are set correctly for your CPU. You can also try to "undervolt" the CPU, will really reduce the temp, if those things don't work, it's time to get a better CPU cooler
When will TVMW be able to read DTS audio directly from a source file. I have a few BD's with DTS only audio tracks and I really don't want to spent time extracting the audio track, converting it separately and then re-adding this to the main video file in TVMW.
Frankly, with the number of Blu-Ray's coming out with DTS audio, I just find this to be a basic feature (basic = I won't buy the soft if this is not there).
This is usually the result of the setting son the DVD player and/or the TV used to view the completed DVD. It can vary from one player/TV combination to another.
I have changed my computer and I have removed a hard disk so I don't have anymore the partition G where I had put the projects that now I have moved in F.
Now I have anymore the partitions C, D, E and F so TMPGEnc Authoring Works 4 doesn't open the projects created before.
Solutions?
Maybe use the windows Administative Tools -> Computer Management -> Disk Management utility to rename the drive partition (e.g., F) to match the old names for the project in questions (G).
You can check where files should be with the Project file check tool. Go to the Start stage-->Advanced Tools-->Project file check tool, and select your project file. It will show the path of the items in your project and whether or not it is present (+ means present, - means not present).
Also, I believe if you try to open a project file and one of the source files are missing, an error window will appear for each missing file. In this window, you can click on the "Browse..." button and reassign the source file if it is in a different location. You will be able to do this for each missing file.
I use AVCHD which is basically a Blu Ray wrapper and the files are m2ts.
When I'm using these files in Adobe encore they don't get transcoded when burning to Blu Ray. Is this the same with TMPG Auh Works 4?
Unfortunately, no. Since AVCHD video is encoded as H.264, it will be re-encoded in TAW4 since TAW4 cannot encode anything as H.264. All output in TAW4 is MPEG-2 or DivX.
You can also check your links if you activate the third button from the left (the one with the arrows <->), or go into the link editor tab in the Menu stage.
Run the Simulation to also check for errors; if there are any overlapping buttons or unlinked items, an error will show up and tell you what page the error appears on.
One hour after my mail the import was ready, but working with the file is very, very slow.
So I started an import with proxy file yesterday evening. Now, 13 hours later the messagebox says 'Proxy file will be checked' (translated from German version) and 0%. In the directory, where the proxy file should be saved, there is until now no file.
Is that correct?
File import time will depend in part on the speed of the source media/drive, the speed of the drive to which you are writing the information, the interface to the drives and such other processes as may be running on the computer that eat into available drive and clock time. Running AV tools can really slow down read times, USB-1 is slower than USB-2, and so on.
Tell us a bit more about your source, destinations, interfaces, and what else is runing on the PC in quesiton.
In a quick test on my system it took about 7 minutes to import a 4.2 GB DVD reading the DVD with the internal DB/DVD writer drive. If this scales linearly, it would take about an hour to import 33 GB.
When I encode an Mpg2 with TMPGEnc Plus 2.5 and import it into NeroVision 9 to author a DVD, I cannot fast forward or rewind the video when I play back the DVD on certain DVD players. I have Nero set up so that it does not re-encode the Mpg2 file. When I encode an Mpg2 with other programs & author in NeroVision 9, fast forward works OK. I'd rather use TMPGEnc because it's a much better encoder.
I want to create some dvd from movies i downloaded, but i can't use the .mp4 ones. I just get to see a black scrren in the cut-edit window and in the simulation part. Can someone help me solve this?
You might need to update QuickTime or download a codec. If you can, use a program like MediaInfo or GSpot to analyze the file. Post the finding here or search for a codec that can decode the video.
I can create CUDA encodes on my machine with no problems and they play on PCs and other media devices. However, my Samsung Galaxy SII refuses to accept the files, regardless of encoding conditions, resolution, bitrate, etc. It merely reports an unsupported file format. Encodes using other software, including Handbrake, work fine. WMV encodes from within VMW are fine (but slow to encode).
Any suggestions about what the problem might be? Generally this phone is reported as playing anything thrown at it.
I have a problem between the demo version and the retail version. When I'm using the demo version I could use toconvert without problem my WTV file and MP4 or MKV . Since I 'm using the retail version I couldn't !!! I haven't got any error message ...
I have forget, the freeze of picture are always between 37 or 40% . For the support it's a conflict with Quictime or FFDshow or Xvid...I don't understand why the demo version work without problem not the retail !!!!