This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
After loading a file and clicking on it, then edit, I get a blue screen with a fatal exception error message. It has only just started to do this. I've uninstalled and re-installed TMPGEnc but get the same result. Any advice greatly appreciated.
I've got tmpgenc installed on a pc (P3, 500 MHz) and on a Notebook (1200 Mhz Celeron). When trying to open the same *.avi on both conputers, the program on the notebook does not recognize the audio-source and the created mpeg does not contain any sound. What can I do about this problem? It's the same tmpgenc-version and the same *.avi-file.
The biggest problem people have with avi files is they don't realize avi is a generic term. It is the most widely used audio/video format on Windows platforms. However it is not at all the easiest file to play. Because it is not compressed with one specific codec, rather it is a file that can be compressed (or completely uncompressed) with any one of hundreds of codecs (examples: divx, MPEG-4v2, Indeo 3.2, I263, Cinepak etc.).
AVI means "Audio Video Interleave".
So you need to find the codec for the avi, probally Divx. You must have it installed on Pc and not Laptop
thanx for your answer. The problem is not the codec, the problem are two different pc's with (almost) identic software that don't work with identic movies in the same way.
After choosing the video file the notebooks program doesn't show the automatically selected audio file like the program on the other pc does. Watching the same *.avi on both works, but using temgenc does't work on one of them. What could be wrong?
Your problem is that the audio in your AVI file is not supported in Tmpgenc ,Most audio formats aren"t, you need to extract the audio from the AVI file to a WAV file with something like "Virtual Dub" or "sound Forge" then use the WAV audio file as the audio source...You should do this with ALL files...
I'm trying to change the mpg file size. Some files are to large and some are too small. When I change the quality setting the file size is about the same? I have it set to 65% if it dosent change the output file why not have it set higher by default. Whats best to change when you want to make the file bigger or smaller.
My current settings are:
svcd
480x480
cq 65% 4000x1800
Haveing the Quality setting on 65% is way to low, up it to 85% , but there is no way to predict the final file size with CQ so it is a lot of Trial and error..
I have to disagree here.
65% is ideal for the bitrates you are using. I know because those are the settings I use and have tried and tested them many times.
With that Q setting your bitrates should should stay at the lower end yet still be at a comfortable bitrate to prevent macroblocks in most scenes and only needing to go up to the higher end when needed.
This will allow you to fit a regular movie on 2 disks. I would think 85% will take the bitrate to high unecessarily causing the file size to be too large for 2 disks and it will make a difference to the size depending on the type of movie you are using.
If you wish to reduce the file size slightly then why not reduce the audio bitrate to 128 kb/s. If that won't be enough then reducing the min bitrate by 200 kb/s and the Q slider accordingly by 5% should roughly give about a 100mb reduction in file size.
Minion the reason you are getting macro blocks is because you probably have the Min bitrate set too low even though you have a high Max bitrate and a high quality setting.
Anything below 1800kb/s WILL result in macro blocks. 1800 kb/s is the lowest you can go without noticable macro blocks appearing in normal scenes.
So then when your never use less than 1800, even if you need to reduce the file size. What about using the CD's that hold larger amounts like 90 or 99 minutes?
Are you planning to develop an international version of the program, I mean with the interface in French, German,.. and others languages. This would expand the range of your customers, not everybody fully understands english !
A good way to do that is text based language files, that means that you program uses a text file for all the text of the program, when you or someone else wants to make a translation they just copy and rename the file and change the text according to their language.. more and more programmers do that because it's so easy and many internet users help you and translate the files because they want to be using your great software in their own tongue !
as in, have several files and create a playlist? yes.
setting --> advanced --> source range. select the in and out for your first chapter, file menu and go add current project to batch list. go back to source range and choose the in and out for your next chapter... etc.
But WHY???? any authoring program worth useing Will have an option to manually set the chapter points your self without Butchering the file into Pieces...
Split files usually end up as different titles on the authored DVD. This causes a hesitation when going from one to another on most players.
Dazzle DVD Complete has the best chapter/thumbnail/motion menu selection method I have seen. (But it doesn't accept 16:9 so I went to Ulead and have to live with MUCH clunkier motion menu setup.)
Hi. I've had no problems with TMPEGEnc... until now. Any .AVI I produce with Adobe After Effects causes problems in TMPEGEnc. TMPEGEnc compress to MPEG-2 without error. Then I demux. But, BbMpeg will not mux. It says "cannot read input file." Also, DVD player software cannot play the .mpg file from TMPEGEnc. This is ONLY with video that originally came from After Effects.
I would also like to add that if I demux and remux in TMPEGEnc, the result is the same -- Software players cannot play the resultant system stream. In fact it appears that it plays video of the first GOP, then stops. The audio continues for a few seconds, then stops.
What format are the AVI files you are inporting to Tmpgenc...Try raiseing the "Direct Show File reader" that sometimes helps Tmpgenc read certain files better..or you can try to frame serve the file with Virtual Dub..
Are you saying that once encoded to MPEG from the AVI that the files cannot be played or re-muxed?
If TMPG can encode the file to MPEG then it doesn't make sense that you can't play it unless the AVI's you are exporting are at some weird resolution or something and you are encoding the MPEG to the same resolution.
This is the way I make Vcd's!!!You will have to find and download some of these programs yourself
After ripping the vob files with Smart Ripper I use DVD2AVI to create my dv2 file for frameserving to TMPGEnc for the Video only. In Audio>Tracks>(select)NONE.
After opening the vob file(the first one) under video>FIELD Operaton>(Select)Force Film.then File>Save Project. This will create your dv2 file for the video in TMPGEnc.
Then I use VOB2Audio to create the Wav file.The program is pretty straight forward. Hopefully you will have ripped a lst file(if you ripped the movie and not a backup(in SmartRipper)) If you don't have a lst file you need VobListMaker from AD Software.
In TMPGENc load the template for VideoCD NTSC FILM,change the motion search presision to HighQuality(slow), Highest quality doesn't do much but takes way longer.
Change the Video Arrange method to Full screen(keep AspectRatio) in the advanced TAB
In Options>Enviromental Settings>External Tool, check external Audio Encoder Layer2and browse for your exe. for SCMPX(which I like better than TooLame for an external audio encoder).
Check USE by Sampling frequency converter and browse for exe. for SSRC(a good sample rate converter)
No your ready to encode. Good Luck!!!
I have spend about 2 years testing and trying different programs and settings, This way works great. If you have any questions you can emailme.
just a suggestions but there are much better quality compression codecs to use than mpeg1.
if you want to watch your movie in a dvd player, then mpeg 1 is probably the most convenient since you will use less cds. mpeg2 (SVCD) will give you much better quality and still allow you to play it in a DVD player but you can only fit so much on one cd, and your movie ends up spanning 4 cds...
however if you have tv-out in your computer , or just want to watch movies on your computer, DivX is definitely the best way to go. You can fit a whole movie onto one cd and you won't notice the lossy compression if you output it to TV. www.divx.com. you should be able to find a bitrate calculator on vcdhelp.com to help you work out a bitrate, and there are plenty of guides around on how to get the best quality out of the least size.
I personally wouldn"t advise you to use the "Forced Film" option, which only works on Film sources..If you plan on Makeing Chapters or Menue"s then you Can"t use the forced film option cuz most Good VCD/SVCD authoring programs that allow you to do Chapters and menues don"t allow you do Use Files that are 23.9FPS, and if you live in NTSC Land Why not use the Higher Quality Interlaced video instead of Film, but I guess it is a personal taste...
First of all if I'm reading your question right then you wish to make DVD's not VCD/SVCD's.
Your best bet to preserve quality and save time is to us IFOEDIT which can strip all the unwanted menus and files from a DVD. Leaving you with a smaller file, but with the main menus intact thus allowing you to burn to a regular DVD.
If you really do wish to create VCD or SVCD then DVD2AVI is the way to go.
Iam going to agree with dgold1009 here. It is best to use the FORCEDFILM option with DVD2AVI if you are using NTSC disks. This will return the DVD back to it's original progressive state as long as the original DVD is originally 23.97 film which most are.
This will save you a whole host of problems. One of them most importantly is interlacing artifacts. A progressive movie has no interlacing artifacts whatsoever and should be of better quality than an interlaced movie.
The second reason is file size. A 23.97 movie is smaller than a 29.976 movie.
Once you have created the project file with DVD2AVI all you need then do is encode to MPEG2 and add 3:2 pulldown to make the movie 29.976 fps. Choosing the 'SuperVideoCD (NTSCFilm)' template will do this for you and your movie will be re-encoded to 29.976 which is the correct framerate for NTSC.
what sort of video file are you trying to open? something from a DVD?
if its from a dvd you probably need a VFAPI plugin to be able to read mpeg2. otherwise search for a VFAPI plugin to open that specific type of video you have.
You have to have the DVD2AVI Vfapi plugin properly installed ,Go to "Options" to "enviromental settings" to "vfapi plugins" and look for a DVD2AVI.vfp plugin..If it isn"t there then go into your DVD2AVI folder and copy and paste the "DVD2AVI.vfp" file into the Tmpgenc folder then the plugin should appear..and the you have to make sure you don"t move or rename or delete any of the D2V files of VOB files from were they originaly were...
Has anybody experimented with settings on you DV camcorder that produce better MP2 results when later converted? For example, I can change the shutter speed to decrease smearing on fast camera or subject movements. However, increaseing shutter speed means you need more light which lowers you depth of field which can make non-subject areas of the shot out of focus, etc. etc.
Wondered if anybody had done some work in this area to find optimal config. I understand that the movie makers had to send their directors and camera operators back to school to learn how to shoot film for optimum DVD results. Different techniques from the old celluloid days.
I am having problem opening a AVI file created by Premiere. I added some title
to the original film (avi also, and tmpgenc had no problem with it), and exported to the following format:
what error does premiere give when you try to open the file?
what codec are you using to encode the file in tmpgenc? sounds like premiere is not happy with the format your video is in..