Hi. Since i upgraded to 2.59, it seems no matter what i do my movies come out to long & won't fit on one cd, have no sound, or they freeze at some point. I know about the direct show thing so that's not it. Any help please. thankx.

Hvae you gotten any response to this?

Thanks.

No i haven't.

Yes there is a bug in the muxer in the new version which is causing the problem you are having.
Just re-multiplex the MPEG in the earlier version to solve the problem.

ASHY

Well if they have no sound then you should try extracting the audio to a WAV file with sometimg like "Virtual dub" and use that as the audio source..If you are makeing a VCD and you are lowering the bitrate lower that the Standard VCD bitrate then you need to go to "settings" to"System" and change it to "Video-CD NON-Standard" this will let the file size decrease..But the Quality if files with such a low bitrate will be really bad...

>If you are makeing a VCD and you are lowering the bitrate lower that the Standard VCD bitrate then you need to go to "settings" to"System" and change it to "Video-CD NON-Standard" this will let the file size decrease

No Minion this won't work in the new version, as I have said, because of the muxing bug.

ASHY

I personally Haven"t had a problem With any sort of Muxing problem, So I don"t think it is a Bug with every one...

ASHY & Minion thankx for the reply. ASHY what do you mean re-multiplex the MPEG with an early verson?

Minion check your MPEG1 VCD encodes, you will find that even when using lower than VCD standard bitrates the bitrate will be padded to standard VCD even when using the 'Non standard' stream setting.

>ASHY & Minion thankx for the reply. ASHY what do you mean re-multiplex the MPEG with an early verson?

If you have used a 'Non standard bitrate' say lower than standard VCD the you will need to use the 'simple multiplex' option in the MPEGtools to and choose the stream setting 'Non standard VCD' to remove the padding.

Just load the file into both fields and rename the output.

ASHY

How can I use DVDx 2.0/TMPGEnc 2.59 with Toolame 0.2i or SCMPX? I want to make a VideoCD from a DVD-Video. DVDx 2.0 and TMPGEnc 2.59 works fine together without Toolame/SCMPX, but when I use on of these two programs both DVDx 2.0 and TMPGEnc 2.59 freezes. The only thing I have done until now is to push the browse button, so TMPGEnc know where to find toolame/SCMPX. But this is not enough, it seems. By the way, which is best when it comes to sound quality, toolame or SCMPX?

Thanks in advance

Every time i try to encode a file avi in a file mpg the program stop after a
few minutes and tell me "read error occurred at address 027a5923 of module 'p3package.dll'
with 4746a480. I have windows 2000, amd athlon 2000, 256 MB ddram333mhz, abit siluro mx 440
geforce 64 mb. I'have exctracted tmpgenc in a new folder. I have problems with every program
that convert dvd in divx or divx in vcd. someone could help me, please?

Y DOES IT SAYS CANT LOAD p3package.dll

I have the exact same error. Can someone offer a solution?

That error is caused By not haveing all the Tmpgenc files in the same folder..Every file that comes with tmpgenc has to be in the same folder, and one of those files has to be the "P3P Package.dll"..If you are missing that file or you do have that file but it is still giveing you an error the re-download Tmpgenc...

I found the zip file unpacked the file with the 'e' missing from the end of the word 'package'. When I replaced the 'e' it loaded fine

After several tests, the 2.59 version fails to encode XVCD/XSVCD when using mpg1-non standard, etc.
Appreciate next version will fix it.
Thx.

What do you mean fails to encode XVCD/XSVCD..Every File I encode can be called a XSVCD and it has allways worked...

Thx for your response. What I mean is the function of MPG1-non standard, i.e. when I encode to MPG for fitting in one CDR (e.g. 120min movie).
But after I return to use version 2.58, it's OK. I am glad to notice that someone has put this problem on the BBS.

Yes your right there is a bug in the new versions muxer. It is using the standard muxing rate for non standard MPEG1 VCD files which is adding padding to the file.

To remove the padding you need to remultiplex in an earlier version using the 'non standard VCD' setting.

ASHY

Hello Everyone!

Since I'm new at the zone...

In trying to convert a few movies to mpeg-1, i'm recieving the msg : "Read error occured at adress 0049eecd of module 'TMPGEnc.exe' with 0009d43c". It happend to me a few times. I simply asking why?
Is it have to do with the fact that when opening the filw in VirtualDub i recieve the msg : "inproper VBR audio encoding...etc etc"?

Thanks from ahead

Haim

The improper VBR encodeing is a Totally seperate Problem ..That error means that the audio in the source file is encoded with "VBR Mp3"..Tmpgenc will not encode "VBR Mp3" so you will need to extract the audio to a WAV file with V-Dub and use that as the audio source..The other error Could be from the source file being corrupted, This is very common with Downloaded Movie files from places like Kazaa.

Im getting the same problem too.. is there a way to fix this ??? cuz this is really getting on my nerves.

Check out www.karaokeplayground.co.uk. Traxmaster has wrote a great little prog that makes batch conversion a piece of cake! (With an acknowledgement to Futile)Go to 'Converting/burning mp3+g'.

i cannot find it!!!! but it would be VERY neat- i hate it doing the same step thousand times...

Is-it possible to reencode a mpeg2 file with a CBR of 2500 kbps in a new mpeg2 file with VBR around 2000 kbps in order to reduce the size of the file ?

Yes But you will greatly ruduce the Quality of the Mpeg file...You will get much better results if you use the Original Source file and re-encode that...

Thanks Manion, but is-it possible with Tmpgenc ? Because i tried to do it , but without success...Tmpgenc didn't recognize the format of the source file to convert in VBR (2000 kbps) although the source file was done by tmpenc with CBR of 2500kbps .....

I think what Minion is trying to say is that you dont need to reencode something that is already encoded, regardless of what settings you use. Use the "original" .avi source file and encode that however you please. There would be no point to re-encode an already existing mpeg2 file.

TO answer your question, TMPgenc takes .avi files, not mpeg2 files even if that file was already encoded with TMP

You CAN encode Mpeg2 file with Tmpgenc But you need to have either a "Cyberlink Mpeg2 Decoder" the "Ligos Mpeg2 decoder" or the "Sony mpeg2 Decoder"..I still prefer to use DVD2AVI if I am going to encode Mpeg2 files Cuz it seems faster than other Mpeg2 decoders..

Tmpgenc 2.59 can use an external audio engine. Why should anyone use this facility? Do we get a better sound quality? Which external sound engine has best sound quality? I convert DVD-Video to VideoCD. Can an MP3 encoder be used? Any downsides?

TMPGENC MPEG-1 L2 audio encoder is only "fair". TOOLAME 0.2i
is claimed to be the best, and is designed as a plug in.
See www.vcphelp.com tools section...

It actually is better, and I use it.

Cheers,
Gern

thats www.vcdhelp.com

SCMPX is a really good aone also cuz it has a Sample rate converter which Toolame doesn"t...

No I don"t think you can use Mp3..

After Download your Free Licens Version 2.59 i´m not able to create DVD - Mpeg2 because it says, Expiration date of Mpeg2 is expired.
I just want to test - how can I overcome this problem??
Thanks in advance

Yep, easy.
$48.00

This happens cuz in the past you have tmpgenc installed..You can only install one demo and that is it..After you install a demo and 30 days goes by you can not install a Demo ever again unless you Buy Tmpgenc Plus...

Thanks for this information, but if it is true, that I have installed a demo version before, it must be ages ago - for I can´t remember.

By the way , all Magazines in Germany (PC Direct / Videofilmen/ Camgaroo/ etc.) refere to the Shareware from Tempgen that privat persons can use for free and without any expiration date. This is than absolut missleading and not correct.

Well you can use the Mpeg1/VCD features Forever so in a sence it is Freeware Cuz the Mpeg1/vcd function is Freeware But the Mpeg2 function runs out...

I've created a 1gb mpeg using the matrox remote (G400 & RR-G) and wish to take out the adverts between each episode (two episodes within the 1gb file I captured).
Not having any other editing software I tried the mpeg tools facility in TMPGEnc.
I loaded the file, and sourced the first half of the first episode, I then loaded the same 1gb file again and sourced the second half (of the first episode). I did this again for the first and second half of the second episode (I therefore had loaded the same 1gb file four times and sourced different parts of it) and hit 'run'.
Everytime I tried this, even though the first clip is ten minutes it only created a 120 sec clip.
I loaded the 1gb file again and this time only sourced the first ten minutes - still it only created a 120 second clip.
Am I doing something wrong?
I was beginning to think the mpeg tools facility in TMPGEnc wasn't designed for this, but as I tried it again only sourcing *one* clip, think I must be doing something wrong.
I've successfully used this program to cut mpegs in the past.
Any idea's are greatly appreciated.
Will
--
One thing I forgot to mention - I also copied the 1gb file a further three times so I could import four different clips into TMPGenc tools and source different ranges from each one - still the same output of 120secs.
...
Windows 98se
Abit KT7A motherboard with VIA KT133A /VIA 686B (4-1 version driver 4.43v)
AMD Duron 800
Matrox 32mb G400 Dual Head (682.016 display package)
Matrox Rainbow Runner G Series Capture Card (628 display driver and vt155e video tools)
Primary IDE Master: IBM Deskstar 40GB GXP
Secondary IDE Master: Lite-On 16102b (x16x10x40) CDRW Drive
Secondary IDE Slave: Toshiba 105 DVD-Rom Drive
512mb SDRam PC100 Memory
SB Live 1024 Soundcard (driver 4.06.656)
ADSL EA900 USB Modem

The Mpeg tools only support Mpeg files encoded by Tmpgenc, and even then they don"t work all the time...You are much better off useing a real Mpeg editor, I have been useing Cyberlink Power Director 2.5 lately and it has been working flawlessly for editing Mpeg files..But Womble Mpeg2Vcr is good also accept it seems to add a lot of Padding to the file But it can be removed .....You will get better Quality if you captured to AVI and use the "Cut Editing" feature in the "Source Range" to edit out any part you want to edit....

Hi.
Thanks for the message.
I am familar with the source range facility, but have a query concerning this:
I was under the impression you couldn't source more than one range, for instance I know you can source 200 to 400 of a 1000 frame clip, but what I want to do is source 200 to 400 *and* 600 to 800 at the same time.
Is this possible?
Many thanks,
Will

> The Mpeg tools only support Mpeg files encoded by Tmpgenc

Ah-ha!
I didn't know this!
Now I think about it I didn't actually create an avi. (with the Matrox card) and then encode with TMPGEnc, I captured real time to mpeg1 using an ATI Radeon, perhaps that's why it didn't work as I never ran it through TMPGEnc in the first place.
Can I encode the whole clip using TMPGEnc, and if so, will I lose quality?
Will try source the programs you mentioned, are they available as a demo?
Thanks,
Will

I use adobe premiere to edit my DV avi files. I hear mainconcept's DV codec has better quality than ms DV coded. But I don't think mainconcept's DV codec will help to improve image quality if I output to TMPGenc via frame server(vedioserverpackage 095 from vediotool.net). It only improve if I output in DV avi format. Am I right?