This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
I am enconding a avi video in SVCD format and after any seconds the programa isue a error -272762914 131072, if I confirm after any seconds the error is otherway.
My computer P4-2.4 Windows XP 512 Mg.
Your programa version (trial) 2.58.44.152
This seems to happen quite often with Files that are downloaded off the net..And as far as I know there isn"t really any solution for this accept not to use Files downloaded off the net, they usually get corrupted in some way through the downloading proscess...Or you can try to frame serve the file with say "Virtual Dub" or "AVISynth"..
The VFAPI Plugins Give Priority to certain File types for encodeing ..Without them you wouldn"t be able to encode anything at all..the only way to use Tmpgenc as a Encoder for media studio 6 is to use the "Ulead media Studio 6 Video server" which you would have to Buy from here "http://www.videotools.net/" it is a New product and It is still very buggy and it isn"t supported By ulead ...
Ok, So I used the TMPGEnc to turn my avi's into MPEG. But when I use my Roxio Easy Creator 5.0 VCD creator and tried opening it, I get a window with an X saying "the file, will not work in a VCD player. To make this file video CD compiant, you will need to use an MPEG encoder that supports Video CD encoding." Do I need to turn something on in my TMPGEnc program??? Please help? Thank you!
- DyNasty
Your Problem is Probably "EZ-CD-Creator" ALL Roxio Software is total Crap, and I would rather get kiked in the groin that be forced to use that Crap....Use something else to burn the VCD..Anything even "Nero" or VCDEasy"....
All of a sudden tooLAme will not work any more as a plug in audio encoder. **NOTE maenc did the same thing I just checked ???(*.mpa can not be opened, error message after just over 36000 frames aprox 14+ minutes worth of audio)at the same point on each attempt and even with different input files Windows crash message. It worked perfectly until all of a sudden no go.
I have uninstalled and re installed everything ,empited temp folder, tried different freq. converter,and encoder, more than once no go. Frame server
with DVD2AVI .d2v and .wav. (DVD to .vob with Smart Ripper) then (.vob to .d2v
and .wav with DVD2AVI) and frameserve to (TMPGEncPro for .mpa output) Worked
great for a while I dont know what or if I caused problem?
Any advise??
well Don"t use Tmpgenc to encode the audio...use something else like "Headac3he" or even "DB Power Amp", well if it worked before then it isn"t a problem with Tmpgenc or toolame But probably a Comflict with codecs or other programs you have installed on your system...
Well duh. But I thought someone else might have experienced this problem. If anyone is interested I moved the environmental settings general tab temp file to another directory,as a mater of fact to a different HD and all is as it should be again(not that there was a free space related problem)?? I like to encode .d2v+.wav to a system video+audio.mpg and let DVD Complete take it from there, very very good results. Anyway thanks for the input and response.
The same JUST happened to me last night, making a VCD NTSC Film.
TooLAME crashed, investigating if it will reoccur... This has never
happened before. 2.59??? I can't Project Wizard a VBR SVCD to
128 audio anymore..... What the!!!??
Do you Know what a ZIP file is??????Well that is the compressed format the Tmpgenc is in when you download it..You need download WINZIP or WINRAR to extract the files..and encodeing AVI to mpeg will not make the Files smaller Unless the AVI format is Like DV HuffyUV or Mjpeg, But if it is a Divx or mpeg-4 then the files will be bigger...
>Use Tmpgenc......hello i tried to download this program and was successfull but it wont open ???when the acrobat reader page comes up it says an error has occured it doesn't start with pdf?? how can i open this program i have avi files that are too large, and need to be compressed and re-formated in to mpeg..what can i do??
for some reason my vcd wont play. i have burned it using nero and it gave me no complaints for burning a vcd. the player i am using is vcd compliant. the only thing i really changed from the vcd template in tmpg was the bitrate to constant quality. does bitrate matter for vcd's and if so what does it have to be?
It DOES Matter if your DVD/VCD player is really picky...The VCD Standard calls for "Constant Bitrate"...But if your Player is that Picky I would Think about getting one that isn"t Cuz it will limit what you will be able to play...Like if it won"t accept a VBR VCD, then it Probably won"t accept a XVCD or a High bitrate VCD which sort of sucks Cuz you will get MUCH better Quality if you can make and Play a VCD with a Higher than standard Bitrate or Resolution VCD...
I'm converting a 6Mb/s MPEG1 to a VCD (~1Mb/s MPEG1). When I select any file larger than about 10Mb it takes a very long time just to step through the wizard.
For example, on a 400Mb file it freezes for about 1 minute just after selecting the .mpg, then another 1 minute after clicking on source to do cutting, then another 1 minute before starting the actual encode.
On a P3/1Ghz/512Mb RAM, this seems like a long time to have to wait when not even encoding. On a 2Gb file, it's about 5 minutes (times 3 since there's 3 times this happens).
P.S., the encoding runs fine and the results are great!
This happens Cuz each step you are going trought the encoder had to decode the entire file...It should happen really Quick in most cases...Have you tried to raise the priority of the "Microsoft Mpeg1" File reader or the "Direct Show" file reader??Doing this might help...
I use TMPGEnc to create MPEG1 files to view on my pocket PC. Most of the time it works perfectly. However, sometimes when I try to copy the encoded file to my compact flash card I get CRC (Cyclic Redundancy Check) errors.
The encoded file works perfectly on my desktop PC, but cannot be copied to my compact flash card. This happens to only about 30% of the files I encode.
I have downloaded 2 plugins for tmpgenc. binkdecode.vfp is used to load Radgametool's bink video to Tmpegenc...But it couldn't work..is there anybody help or tell me what is wrong and where can I find more info?
That is wierd Cuz I went to the site and it doesn"t seem to have a single thing to do with Mpeg encodeing ...it seems to have to do with Video games...
Most of the latest games using bink for encoding videos. I want to convert game movies from Bink to Mpeg using TMPEnc..So I found this .vfp for TMPEnc. there is also str.vfp which you can import Playstation movie file to TMPEnc..But I can't use binkdecode..I ask here, if anybody use or not..But it seems you don't know what I am talking about..
Now I understand what you want to do...I don"t think those Plugins are supported By the author Of Tmpgenc, Meaning that he didn"t have any input in writeing the plugins so Maybe that is why there is a Compatibility issue..But there ia allways a Workaround for everything..
Ok, so I've turned my avi's to mpeg, now how and what do i use to burn it into VCD's? I've used Easy CD Creator to make the vcd, but i got nothing. I also tried VCDeasy, it showed that everything was burnt onto the disc, but when i put the disc into my player i get nothing? What can and how can i use it to make VCD's??? Please help? Thank you!
well you have to make sure that there is Video and audio in the Mpeg file..Just watch it with Media-Player or something...if there is a Picture then I would use someting like Nero to burn a Basic VCD..But it sounds like something went wrong with the encodeing.....
First of all, excuse me if the question was already asked. I've encoded a DVD to AVI file with sound in AC3 format. When I want to use it in TMPGENC, it doesn't recognize my AVI file as containig sounds. Do I have to extact it in WAV format? Will it keep the 5.1 mode? Is it possible to have it in TMPGENC without changing anything to my AVI file?
OK this depends on what you want to make out of the AVI..if you want to make a VCD or SVCD you can NOT use AC3 audio and expect it to play on your DVD Player or have Tmpgenc recognize it..but if you want to make a DVD then you can just de-mux the ac3 audio then just encode the video then re-mux the AC3 to the mpeg file for DVD...But if you want to make a VCD or SVCD then you will have to convert the AC3 to Wav format...You can use a Program Called AVIMuX to demux the audio as either AC3 or Uncompressed PCM/Wav...
One question more, if I demux the AVI file and convert the sound in WAV format I will lost the 5.1 definition, isn't it? Because I would like to keep it and so have a VCD or SVCD that contains the 5 chanels.
You Can"t ...It is not part of the SVCD/VCD specification so there is No way you can do it Unless your DVD Player supports mpeg audio 5.1 which barely any do and it would be displayed right on your DVD player with a Mpeg 5.1 logo..then you would have to find a program that makes mpeg 5.1 of which I don"t know of any...so you are pretty much S.O.L...
One question more, if I demux the AVI file and convert the sound in WAV format I will lost the 5.1 definition, isn't it? Because I would like to keep it and so have a VCD or SVCD that contains the 5 chanels.