What are the feature differences between the freeware 2.59 and the purchase versiosn 2.5 Plus?

Well the freeware Version isn"t really Freeware, the Mpeg2 encodeing Runs out in 30 days were the Registered "Plus" version Doesn"t run out..The Plus version has a Few more features Like a Better 2 pass setting and Higher resolution settings..And once the "Demo" version Runs out you can never install a demo version again..But if you are just doing Mpeg1 encodeing then there is no real need to Get the Buy "Plus" version Cuz the Mpeg1 encodeing in the Demo doesn"t run out...

I have error 'Could not open this file with DirectShow.(0x800700E)' when I try to cut my mpeg file. I've reinstalled Windows media Plaer and DerectX8 and still no good. What is missing?

I have a mpg that I have converted from an avi. It's perfect when I play it on my computer, but my TV adjusts the picture to full screen when played in a dvd player. Why is this? Can I have it play widescreen on my TV as it does on my computer?

Thanks

why after ripping a dvd movie using the following programs is my audio out of sync. with the rest of the movie..i.e my audio track lasts for about 20 secs. longer than the movie?? (this happens when i view the mpeg movie on my pc.after encoding using tmpg enc 2.5)
programs used : smart ripper
dvd2avi
tmpg enc.

Well if you ripped the VOB"s properly and used all the other software properly then there shouldn"t be a problem...I have never had a problem like this and I do a half a Dozzen DVD rips a week and I have never had a sync problem like this..

I had it once doing SW Episode One and never understood why it happened.
May have been a hdd glitch during conversion, who knows? :o)
I haven't hada problem before or since, touch wood ;o)
What is your system spec, have you a relatively low processor speed?
Will
--
e-mail me (UK) to trade dvd rips
...
Windows 98se
Abit KT7A motherboard with VIA KT133A /VIA 686B (4-1 version driver 4.43v)
AMD Duron 800
Matrox 32mb G400 Dual Head (682.016 display package)
Matrox Rainbow Runner G Series Capture Card (628 display driver and vt155e video tools)
Primary IDE Master: IBM Deskstar 40GB GXP
Secondary IDE Master: Lite-On 16102b (x16x10x40) CDRW Drive
Secondary IDE Slave: Toshiba 105 DVD-Rom Drive
512mb SDRam PC100 Memory
SB Live 1024 Soundcard (driver 4.06.656)
ADSL EA900 USB Modem

I convert a divx to SVCD format and want to get less Minutes on a CD-R with Lower Bitrate than "1600" ,but it seems to be locked, how can i solve it?
Thanks(TMPGEnc 2.59.47.155)

hi,

I currently have tmpgenc 2.54 and was thinking about upgrading it to a newer version but i see so many bug reports for the newer version of tmpg (i.e. 2.58, 2.59). Can anyone tell me which version is the most stable from 2.54 through 2.59? Should I even bother upgrading? I just want to encode some of my various video files (mpegs and avi's mostly) to vcd to play on my dvd player so I want a version that won't have bugs or mess up the encoding but still have good quality. Thanks for the help.

PS does anyone know where to get older versions of tmpgenc than the newest update that's available on this site? Thanks again.

If you are happy with the one you got then stick with it ..Or you can try a newer version and Keep the older version also...There are a Few new features in the newer version that are handy like encodeing sequential AVI files..

Hello all. I have a problem using TMPGEnc 2.58/2.59. I used 2.58 without any problems, but now whenever I try to encode an avi, the mpeg starts fine, but then the sound cuts out. It has done this on several avi's. I even extracted the audio using VirtuaDub and even with another program, AVI2WAV. I have listened to the wav and it is complete. There is something in the TMPGEnc encoding process that is losing the audio. When I use version 2.55, it works fine, but the video is of lesser quality than the ones made using later versions. Any ideas?

Try useing a seperate Audio encoder to encode the audio to Mpeg audio..Like Headac3he...

I thought that Headac3he would only work for ac3 streams. Plus I have used a different program than VirtuaDub. Even then, the wav played fine in RealPlayer, but somehow did not convert the audio to the mpeg. How would I extract and convert with Headac3he?

You don"t extract with "Headac3he" ,you Just encode to Mpeg audio with headac3he...So you extraxt the audio to Wav with Virtual dub then load the Wav file into Headac3he and encode it to mpeg audio then you Mux it with the Mpeg Video you get from tmpgenc....There are external Audio encoders that can be used In Tmpgenc..The 2 good ones are "toolame and SCMPX" you install them in Tmpgenc by going to "options" to "enviromenatl settings" to "External tools" then navagate to the Encoder plugin...You can find these Encodec plugins on any search engine like Google..

I've had the same problem, but when i used VirtualDub to extract the sound file (as *.wav) from the avi-file, it worked perfect !
Select in TMPGEnc as video file the *.avi file and as audio file the *.wav that you've extracted from the movie.

When I convert an MOV file to VCD I cant get any audio to convert over..Any suggestions?

Maybe You can try to save the audia as a separate WAV file. then you use audio source to put this audio in the mpg file

I converted a divx file into mpg
Nero shows an error sying Stream encoding is invalid for (super)vcd.
Have I converted in wrong way or how do I solve this problem?

I want to archive all my DV tapes onto VCD or SVCD (no DVD burner yet).
I ahve been playing around and it seems that MPEG-2 is visibly the better quality, although 5 minutes of tape take 100 MB. But then, not even a 1-hour tape fits on a CD...
MPEG-1 fits perfectly on a CD, but the quality...

Does it make sense at all to first create a AVI, and then convert it?
Any suggestions how to do it best??

Thanks to all, Holger

No it doesn"t make any sence to make them AVI them emcode them to mpeg Cuz this still will not effect the Size of the file...If you want to use the SVCD format and want to get more Minutes on a CD-R you have to Lower the Bitrate..Lowering the bitrate will lower the Quality somewhat, so it is a Trade off with Quality and File size and the trick is to find a Good medium..You can get about 50-55 minutes on a CD-R in SVCD format with Fair Quality By lowering the Bitrate down to about 2000-KBS and lowering the audio bitrate down to 128kbs...

how can I lower the audio bitrate?
It is deactivated and fixed at 224...

I am slow wondering why, under settings - video, the video size says 480x576.
When I later watch the mpeg2 file, it appears to be pressed in x-axis, and on TV I need to switch to 16*9 mode to watch it in correct relation.

Weired, hmm? What am I doing wrong?
Thanx, Holger

I am using the Movie Maker to record an AVI file from my DV camera. I have the software create clips, so I can directly jump to a certain scene. I want these clips (index?) also appear in the mpg file, but using TMPEGEncoder, this info is gone. Burned on CD, I only have one file to choose from, whic is the converted avi file.
Any way to keep these clips or have an index created based on these clips?

Thanks in advance,
Holger

I think you are talking about "Chapters", to put in Chapters you need to use a Burning or Authoring program that supports Chapters...A free one is Called "VCDEasy" but Programs like "Ulead DVD Workshop" are Much better for this type of stuff...

I used VCD Easy to burn the file to CD. But I found out that the mpeg file converted with TMPG from an avi file, does not have this clip or chapter anymore. So I think TMPG is loosing this information, or at least ignoring it. Bug or missing feature, this is what I am trying to find out...
Any idea? Thanks, Holger

If you have somehow Put chapters in the AVI file (Didn"t think it was possible) Tmpgenc WILL not transfer them to the Mpeg file..No Encoder Has this feature...

I have encoded a divx file to mpg. When I try to burn it to vcd in Nero I get the following error: "Stream encoding wich is invalid for (super)vcd"
Is there a setting I should change before I encode the file?

This error is usually because you encoded a Mpeg1 file instead of a Mpeg1/VCD file or the same with SVCD if you just encoded a Mpeg2 file instead of a Mpeg2/SVCD file..The way to make sure that you have the correct setting is if you go to "Settings" to "System" and the dropdown menu should be set to "Mpeg1.VCD" for VCD files and to "Mpeg2/SVCD" for SVCD files it cant be set to a Plain Mpeg1 or mpeg2 file..The difference between the 2 types of files are the Header and the Mux rate...

When capturing DV personal files with Scenalyser I create a lot of sequential files. When I want to load them into TmpgEnc with the Option "Open sequence file as a movie", only one part of the files are loaded. It seems that there is a limitation of the maximum number of files (or frame, or time ?).

Can you please check.

I am a registered user

xly

Hi

I did a quick test on this and it does only "show" the first file loaded i.e. DV-00001.avi but the encoding runs through the other files as expected.

HTH

Thats right ,you can go to the Source range windeo and moove the slider and see if the all the files are there in the correct order..

Check it using the preview option. File>preview

ASHY