This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.
Pegasys Products BBS [ Sorted by thread creation date ]
Another question about the "cannot open and unsupported file".
I checked everything what you write about that topic, but nothing helped me.
I raised the priority, load down a new codec, but still the same error.
I can watch the film on evry player i have, no problem.
Also, i never had problems with encoding videos, but from one day on, this error
comes evrytime.
Please help me, I am really out of order.
THX
Have you tried Installing "FFDShow Decoder" and configure it to decode the format that your AVI file is in?? But if that don"t work I guess you can try Frameserveing the File to Tmpgenc useing Virtual-Dub or AVISynth but this is a Little advanced....
I have converted 2 or 3 movies using Tmpgenc Dvd author and 2day i tried 2convert another 1. But when i was checking the movie when it had finished authoring it i noticed that it had only converted 500mb of the film instead of 4.1gb (im doing this exactly the same way as i did the other ones) the format of the movie im authoring is 720 x 567 (mpeg2 format) and plays fine. Could there be a problem with the mpg ? Ive tried re-converting it from the oringinal avi many times but still it hits a problem in extactly the same place.
I have the same problem
I maid a mpeg file whit pinnacle (i took the option for dvd compatible
pal 756x480 and a bitrate of 8000 and 25f/s) my avi file is about 3.5 GB
and when i do the conversion to VOB he just makes only 1.4 GB
anny one a solution for this, or an other programm to convert mpeg to VOB ?
Is there any way to remove the "Play All" button in a menu? I want to create just a main menu with 2 tracks and be able to select either track 1 or track 2. I could live with just making the play all button invisible and pushing it to the edge of the screen, but then Track 1 isn't highlighted and I have to use the remote to move over to Track 1 or 2. Is there a way to select which button is the first button?
Unfortunatly, you can't remove this Button. All you can do is to resize it an set it into the Overscan-Area. But the Button will stay selectable, so that's not an really good Idea.
Thanks, I've tried that, and it is still selectable, but it's also the selected button so there's no highlight on the screen, which means on a settop player you need to press buttons before you see a highlight.
I am a newbie, I have made a movie using movie maker in WinXP and would like to burn it as a VCD movie on CD-R disc to give to friends. How would I use tmpgenc to do this?
I did try using Nero5.5 on my liteon CD-RW but it would not work
Tmpgenc will Encode your AVI file to Mpeg1 VCD format then you have to use something like Nero to Just burn the Mpeg file to CD-R in VCD Format...If you Allready Tried to do this with Tmpgenc would have allready figured it out..When you start Tmpgenc the "Wizard" will pop up and Guide you through setting up your File to be encoded to Mpeg-1 VCD, There insn"t really anything I can explain here that the Wizard doesn"t allready explain, so Just try it and if you have a Problem Post what the Problem is.......
PS: you will have to put most movies on 2 CD-R"s in VCD format...
>I am a newbie, I have made a movie using movie maker in WinXP and would like to burn it as a VCD movie on CD-R disc to give to friends.
Movie maker doesn't create the correct format for VCD it only craetes WMV files.
You need to re-encode it first with TMPG using the VCD template then burn it with Nero as a VCD not a data disk.
I am having a small problem whith the m2v playback after encoding an xvid movie, the picture quality is fine,the sound is great,but when the picture is moving it pause's every second like its sticking , ive have tried HQ motion search, 2 pass vbr,CQ br, but none of the change's i made seemed resolve the problem . can anyone help??
What it sounds like to me is that you encoded the AVI file to a mpeg file with a Different Frame rate...You have to encode your AVI file to Mpeg useing the same Frame rate as the Source AVI file so if your AVI file is 25fps you have to encode it as 25fps and 29.97fps has to be encode as 29.97fps ECT...Check that your AVI file and Mpeg file have the same frame rate....Cheers
I have a question concerning aspect ratio and I'm going to try and be generic as possible. I have a source that's true 16:9 (704x400 no black borders) and I want to burn it to DVD which is 720x480. I want to display it on a 4:3 TV at the proper aspect ratio (ie 16:9 with black borders top and bottom). In TMPG do I set both source input and output to be 16:9 even though it's destined for a 4:3 TV? Additionally, which positioning do I use? Centered, Fullscreen? with or without maintain aspect? Does the preview window in TMPG represent how it will look on a TV or how it's being output (ie. 720x480 1.5:1)? Obviously the DVD player processes this video to display it in a correct aspect ratio either 4:3 or 16:9 does the preview pane do the same processing as a DVD player? I guess to sum up all that giberish above, if it looks right in preview is it going to look right on my TV or should it looked squished (as in 1.5:1) in preview in order to look right on my TV? Thanks.
Thanks Ashy. Concerning your question, I've noticed this differing view a lot on this board concerning aspect ratio and I'm definitely one of the confused people. Perhaps incorrectly, I consider aspect ratio to be the number of pixels in the horizontal divided by the pixels in the vertical. This makes sense to me when it comes to movies because 16/9 appears to be a wider and shorter image than 4/3 which is narrower and taller (though I guess on a 4/3 TV both images are displayed equally wide but that's due to either the image being stretched or cropped). Thus 720 / 480 = 1.5. Obviously 4 / 3 = 1.333 and even though I've read enough of your posts to KNOW you are right on this...I don't understand how so...probably because I know nothing about video processing. Care to explain AR and what makes 720/480 magically equal 1.33? I know I'm not the only one in the dark on this one, in fact on Doom9's site the DVD Basics: Aspect Ratios also states 720x480 is technically 1.5:1
So my question is, why is DVD mpeg encoded at 720x480 and not 704x400 (16:9) or 720x540 (4:3)? It just don't see the point in having the DVD player further process the video to get it to appear correctly when it could have been encoded that to start. There must be a reason, I just don't know it?
Sorry I need to correct myself, aspect ratios even get me confused sometimes.
1.33:1 IS a 4:3 aspect ratio, but as far as DVD is concerned 4:3 is actually 1.25:1.
You are right with your calculations, 720/576 = 1.25 it's just that with NTSC resolutions you lose 100 lines from the vertical even though the aspect ratio does infact remain the same.
PAL is 625 lines full resolution and NTSC is 525.
Imagine you have a true 16:9 DVD source which is in the 16:9 PAL aspect ratio.
The PAL frame size would be 720x576, but the actual image size of the movie is 720x432. What makes it 720x576 is the added black borders which are 72 pixels each.
So we can calculate this output aspect ratio easily 720/576 = 1.25:1
Now if we need to output this movie as NTSC then the actual image itself doesn't change, but the borders will be smaller, framesize will be 720x432 and
the borders will be 24 each leaving 720x480.
So in actual fact the aspect ratio hasn't really changed, but it's just that to format it for NTSC a few pixels have been cut off from top and bottom to give smaller borders. These pixels are not actually in the image, but are just what is added by the player.
This is why both PAL and NTSC can be the same ratio even though the frame sizes are different.
If the same DVD is played on widescreen TV then there are flags encoded with it to tell the DVD players decoder not to add the borders to the image, so it is displayed in it's true 16:9 format.
Here is where it gets more confusing, all of the above frame sizes can be 4:3, when referring to 4:3 don't think of it in exact terms, but more of the general scale of the output in relation to your TV.
The above frame sizes and ratios only refer to DVD resolutions, an actual full resolution 4:3 image would be 768x576 which would be a standard 1.33:1 ratio.
I'm sure there are going to be some challengers to the way I have explained things but I tried my best with such a hard subject and the principle is right.
The other thing I failed to mention in all this is that when dealing with aspect ratios, the aspect ratio is usually referring to the pixel aspect ratio.
This means each pixel is not necessarily square as in a 16:9 or 4:3 ratio, the actual pixels are rectangular which again is why a 4:3 ratio can be 1.25:1 or 1.33:1 because the latter two refer to the image not the pixels.
Another question concerning this topic. Let's say I have an odd sized video...just for an example 650x400 1.625:1 (maybe a computer animation or an improperly encoded AVI). Which is neither 4/3 or 16/9 in pixels. To encode this to DVD what settings do I choose? Ideally, I want this image stretched horizontally to the screen edge. Can this be accomplished without distorting the picture? Also, can an improperly sized AVI taken originally from a 16/9 DVD source be reasonably brought back to proper AR (ie. 1.625 to 1.77). Can it be done properly without cropping off part of the image?
You can quite easily use the custom size option as you have already chosen.
This will place a 720x443 image in a 720x480 frame thus keeping the ratio of the original the same.
The result will just be the same as the original, but with black borders either side to fill in the extra 37 pixels.
It seems strange that the source has this resolution at all, is the picture distorted in any way?
Aspect Ratios are quite nice Stuff for Discussions...
You have to consider this: If we are Talking abaut Aspect Ratios, we have to talk about 2 different things:
The DAR (Display Aspect Ratio)
The PAR (Pixel Aspect Ratio)
To make things a bit easier, let's talk about PAL.
An Video-Image with the DAR of 4:3 and a PAR of 1:1 has the Size auf 768x576. But MPEG did'nt use a PAR of 1:1, it uses 1.092:1.
So a DVD with a DAR of 4:3 and the correct PAR of 1.092:1 has the Image Size of 704x576.
What's about 720x576? Good Question... If the Videos if following the ITU-Standard, than there's a third Term we must talk about: The Motion Area. In PAL, the Motion Area is defined as 704x576 (NTSC: 704x480). The 16 Extra-Pixels are called the Overscan.
On a right encodet DVD and a TV with correct Settings, you will always see just the Motion Area, never the full size of 720x576 (720x480). But, and that's really bad, most DVDs don't follow the ITU-Standard, they do use an generic PAR of 1.667:1. Then, the 720x576 Resolution WILL BE 4:3, with the result of getting a slight distorted Picture.
BTW: According to the Signal Timing, TRUE Video-Broadcast Resolutions are the following:
using the 1.5.1.549 eval version, i tried to bur using a Sony DVD + - writer, which worked first time, subsequent uses, the dvd writer is not recognised ?
seem very od..is there a fix for the dvd writer tool. or something i can try ?
thanks
stevie (Dr. Ms.)
I am converting a 23.976fps to MPEG at the same fps. In the beginning, the little window that shows what portion it is currently converting showed the video correctly. But when I looked at it an hour later, all it has was a black screen (with slight macroblocking). I'm wondering if there are any problems? I ran the source video through VDub and it doesn't seem to be corrupted and it played fine. What's the problem? It's been black for over 1 minute since I looked at it..
Also, I did a test run and used Source Range to convert the middle portion and it played fine. But, the panning scenes were a bit...."eye-dazzling". Is there a way to make it smoother? This is so frustrating! :(
Several standard themes like "Cloud" and "Cool" have shadow
effect applied to font. I can not find a way to apply the
shadow to fonts in my own themes...