Jump to forum:

This forum is for users to exchange information and discuss with other users about a TMPGEnc product.
In case you need official support, please contact TMPG Inc.

TMPGEnc Net [ Sorted by thread creation date ] << < Prev.   [ 3 / 969 ]   Next > >>
Classify Title User name Reply Last update
Question Video Audio out of sync Timo 0 2019-05-11 04:11:06
Question "Error" in the output process pablur 0 2019-04-29 18:21:21
Question Is there a new Version V7 planned? Release date of English Version? HP 2 2019-06-18 00:24:32
Request Furthermore Keyboard-Shortcuts HP 1 2019-04-29 03:28:49
Bug report Cannot mix PAL/NTSC on Blu-ray Roger 4 2019-05-06 00:44:53
Question Why no Dolby True HD/Atmos Support Kev 0 2019-04-26 22:40:02
Bug report Bugs for encode H.265 Jason Chiu 1 2019-04-15 02:15:37
Question max files captured 1 2019-04-05 02:23:49
Question BD Constant Bit Rate Intel QuickSync NoMention 0 2019-03-31 04:51:31
Question TVMW6 does not shutdown the host PC ? benoitm 0 2019-03-19 17:27:23
Question How to check if I need to allocate higher bitrate for subtitles benoitm 1 2019-03-08 21:41:38
Question Additional 3rd Party Filters? tvscreen 2 2019-03-23 05:39:19

TMPGEnc Net [ Sorted by thread creation date ] << < Prev.   [ 3 / 969 ]   Next > >>
Question - Video Audio out of sync No.71274
Timo  2019-05-11 04:11:06 ( ID:uecfehfg8ln )   [ Delete / Reply with quotation ]

Video and Audio are out of sync during simulation and after Bluray is created but original file is in sync. what could be causing this issue?

Question - "Error" in the output process No.71260
pablur  Mail /  )  2019-04-29 18:21:21 ( ID:xe1orwhaxtr )   [ Delete / Reply with quotation ]

I've burn about 15 BD discs (25GB and 50GB) and I noticed that, although the disc has been burnt without problems, in some of the movies I've burnt there are missing frames every minute more or less. I mean, you can see a little jump in the movie. The original file doesn't have anything like that, you can see it perfectly. And of course I've adjust the frame bitrate before burning the disc, I check if the file is 23 fps or 25 fps etc and I adjust it in the program.

I wonder if the error could be that I was using other programs while burning the BD disc and in the output process. I always burn discs at mínimum speed to avoid problems but still there is something that sometimes goes wrong.

Anyone can help me? thanks in advance!

Question - Is there a new Version V7 planned? Release date of English Version? No.71257
HP  Mail /  )  2019-04-29 03:19:45 ( ID:fdgxgoimmkc )   [ Delete / Reply with quotation ]


I have found "TMPGEnc Video Mastering Works" with Version 7 in Japanese Language on your homepage.

Is there a soon release date for english or german already planned?

Matthias  Mail /  )  2019-04-29 18:00:36 ( ID:bxxfqvauell )   [ Delete / Reply with quotation ]

This is a question I am also interested in. I am waiting to buy version 7 because I don't want to spend the money twice. But I never saw an official statement of pegasys, beside release notes there ist not much communication from the company.

For version 6 it took roughly have a year for an English/German version (Japan release 19. December 2014, English relelase 14. May 2015.

Japan release of version 7 was 27. November 2018, so I have hope that the western version is coming soon...

Best regards

Matthias  2019-06-18 00:24:32 ( ID:vtt4ygbqwsc )   [ Delete / Reply with quotation ]

So it is there, finally...

Request - Furthermore Keyboard-Shortcuts No.71256
HP  Mail /  )  2019-04-29 03:17:14 ( ID:fdgxgoimmkc )   [ Delete / Reply with quotation ]


is there a possibility to add Keyboard-Shotcuts to the Software?

Would be nice to have a Shortcut for following Actions:

1. Timeline-Mode -> Right-click on Video in Video-trace -> "Clip in der Vorschauposition trennen" (GERMAN-Text) / means "Split clip at preview position" or equal in English text.

2. Timeline-Mode -> Right-click on time-bar "Keyframe hinzufügen" (GERMAN-Text) / means "Add Keyframe" or equal in English text.

3. Timeline-Mode -> Delete Clip and close Gap

I want to use this Keyboard-Shortcuts to give this functions to the Buttons of my "Contour Shuttle V2" device.

HP  Mail /  )  2019-04-29 03:28:49 ( ID:fdgxgoimmkc )   [ Delete / Reply with quotation ]

It's me again - another Shortcuts would be usefull:

4. Timeline-Mode - Zoom of Timeline Preview "-" (MINUS)-Button
5. Timeline-Mode - Zoom of Timeline Preview "+" (PLUS)-Button
6. Timeline-Mode - Zoom of Timeline Preview "Ganz anzeigen" (GERMAN-Text) means "Show full" or equal in English text.

Bug report - Cannot mix PAL/NTSC on Blu-ray No.71255
Roger  2019-04-27 01:54:44 ( ID:rnnk63pldkl )   [ Delete / Reply with quotation ]

The Blu-ray specification allows for authoring mixed media discs. Mixing PAL material on a NTSC disc is allowed and works in Adobe Encore.

In TAW6 i can mix 720p50, 1080i25 and 1080p24 without issues/re-encodings. But, if i create a new project and try to mix 1080i25 and 1080i30 TAW6 will force a re-encode of one of the two files depending on the mode you choosed when you created the project.

If i create a PAL project and import 1080i25 and 1080i30, TAW6 will re-encode the 1080i30 material to 1080i25. If i create a NTSC project and import 1080i25 and 1080i30, TAW6 will re-encode the 1080i25 material to 1080i30.

There are two problems here:
1. The Blu-ray specification do allow 1080i25 and 1080i30 to be authored on the same disc.
2. Converting framerates simply don´t look good, so this bug must be fixed.

Additional info:
The source footage is created by Premiere Pro CC2019 using the TMPGEnc Premiere Pro Plug-in. I can mix the same 1080i25 and 1080i30 footage in Adobe Encore.

This bug must be adressed. :)

Brian Ward  Mail /  )  2019-04-30 01:12:51 ( ID:jsdcor913em )   [ Delete / Reply with quotation ]

I believe the Blu-Ray spec does NOT allow mixed formats within the same TITLE - hence why one of the files is re-encoded and isn't a problem with the software.

To get around this, simply create a second TITLE and add the second file to it. As long as all the files in each title have the same format and resolution, normally no re-encoding will be needed (unless none of the files match the Blu-Ray standard!)

I've done this several times when you want to add a mixed set of files to the same Blu-Ray or DVD. Create as many titles as you need (up to a maximum of 99 on a DVD and, I think, 199 for a Blu-Ray). Creating the menus for multi-title discs is slightly different to adding everything to the same title, but is easy to figure out.

Roger  2019-04-30 05:20:03 ( ID:rnnk63pldkl )   [ Delete / Reply with quotation ]

Thanks Brian, but the Blu-ray spec do indeed allow mixed formats and was one of the big advantages when it was released since DVD´s does not allow mixed formats.

I have send this to the customer support and hope that they will fix it in an upcoming update.

Brian Ward  Mail /  )  2019-05-01 18:09:01 ( ID:jsdcor913em )   [ Delete / Reply with quotation ]

Roger, I should have read your question more closely. It's also difficult to establish what exactly is contained in the Blu-Ray standards!

For HD video, PAL or NTSC should theoretically be irrelevant because of course HD doesn't use either. Because of this I've often wondered why, in TAW, you have to select PAL or NTSC for a blu-ray project, other than if you're adding standard definition content that actually is encoded in PAL or NTSC form. I presume this is a hang over from creating DVD projects, which, as you say, can only be one or the other.

I still don't think you can mix video of different standards, resolution, or framerate etc in the same track without some of the files needing re-encoding. If Blu-Ray supports both PAL and NTSC on the same disc, my guess is this should be allowable at the Track level, but not mixed standards within the same track? (OK, previously I said "Title" - more correctly I should have said "Track").

Roger  2019-05-06 00:44:53 ( ID:rnnk63pldkl )   [ Delete / Reply with quotation ]

I am using a separate clips for each Track in TAW. I never add more than one (1) clip to a Track in TAW. Mixing PAL/NTSC footage in one Track would naturally cause issues/re-encodes. The odd thing is that some PAL/NTSC are ok to mix in TAW6 as i wrote in my first post so to me it indicates that it is a bug since some combinations of PAL and NTSC footage in separate Tracks are O.k though the BD standard can be mixed, be it HD and/or SD.

I tried to trick TAW6 by replacing clips in the BDMV\STREAM folder but that don´t work as expected. If i create a PAL project with two Tracks, one Track with PAL clip and one Track with NTSC clip the NTSC clip will be re-encoded to PAL. If i then do a new NTSC project with the NTSC clip and then swap clips in the BDMV\STREAM so i have one PAL clip and one NTSC clip in that folder there is some metadata that force the Blu-ray player to playback the NTSC clip as some kind of PAL. The player report that the NTSC clip is PAL as well.

If i create a BD-disc in Adobe Encore with the same PAL and NTSC clip my Blu-ray player will report correctly, iow PAL for PAL and NTSC for NTSC.

I hope this will be corrected in a future update of TAW. :)

Question - Why no Dolby True HD/Atmos Support No.71254
Kev  Mail /  )  2019-04-26 22:40:02 ( ID:zqkpo9x8l/m )   [ Delete / Reply with quotation ]

When are you going to support more up to date audio formats like Dolby True HD/Atmos, DTS HD etc. ??

You keep up to date with the video formats like Hevc265 4K, 8K etc yet for some reason you stick with only old audio formats like LPCM, mpeg 2, and Dolby Digital 5.1 which is from the SD DVD days!

This lack of support is preventing me from upgrading from SmartRender4.

Bug report - Bugs for encode H.265 No.71241
Jason Chiu  Mail / Home )  2019-04-14 21:15:22 ( ID:ryzj/tnk9k6 )   [ Delete / Reply with quotation ]

Hi Sir/Madam,

I try to convert the video (ts format) to ----> H.265 MKV file.
The video resolution is 1920x 1080

But I found the output file screen is scratches, many small error square holding on the screen in MKV file.

I checked the original file (ts format) by same video player software, but it is normal and no any error/scratches in the same part, so I report to you about this bug issue.

I tried 2 times to convert the video, but still find the same problem in the output file(MKV)

Below is the capture screen between the original file and after encoded file result and send for your comparasion.

1) capture screen (by TS format)
Link :

2) capture screen (after encoded by TMPGENC Video Mastering Works 6)
Link :

If you need more information about the video, please free feel to contact me.
If I can provide any information, I am willing to feedback.

Will you can fix the bug in after version?

Best Regards

Jason Chiu  Mail / Home )  2019-04-15 02:15:37 ( ID:ryzj/tnk9k6 )   [ Delete / Reply with quotation ]

Dear Admin,

For your more information.

I have just tested other programs "mkvtoolnix" & "VidCoder 4.35" to testing whether there is the same problem.

These 2 programs are help to convert *.ts format file to MKV file (H.265).

However, it is no such problem.
So I believe it is a bug in TVMW6_Trial_6.2.10.37_setup_en.

Question - max files captured No.71233  Mail / Home )  2019-04-04 00:21:31 ( ID:ntexf3za1v. )   [ Delete / Reply with quotation ]

hi im trying to capture video clips from a panasonic hdc-hs25 hd cam with my tmpgenc5 sw but it's not letting me capture more than 200 clips. anyone know if newer version (6) of sw can do this? or how i can do this with tmpgenc 5?

tkrave  2019-04-05 02:23:49 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

I think 200 is the limit for version 6 as well.
If you can combine them into one video, that could work. In other words, import 200, output as one video, then create a new project with the rest of the clips and the combined clip.

Question - BD Constant Bit Rate Intel QuickSync No.71232
NoMention  Mail /  )  2019-03-31 04:51:31 ( ID:vcbjrve..nj )   [ Delete / Reply with quotation ]

Whenever I try to do a Constant Bitrate encode using the Intel QuickSync it always gets to 16/X frames and sits there while the total completion time keeps climbing. For example, my encode has been sitting for 20 minutes at 16/163840 frames and is showing a completion time of 1380:42:00 and climbing.

It does this for every CBR encode that I try regardless of the original source video size/length.

I'm on

Any help, please?

Question - TVMW6 does not shutdown the host PC ? No.71224
benoitm  2019-03-19 17:27:23 ( ID:aacy2tticna )   [ Delete / Reply with quotation ]

(cross-post from TAW5 forum)

When I choose Shutdown as finishing task, it seems the system goes idle instead of shutting down. (this is Windows 10 / 1803)

The only visible track left by this action is in the Windows System log:

Log Name: System
Source: User32
Date: 18/03/2019 23:46:51
Event ID: 1074
Task Category: None
Level: Information
Keywords: Classic
User: XXXX\Benoit
Computer: XXXX
The process TMPGEncVMW6.exe has initiated the power off of computer XXXX on behalf of user XXXX\Benoit for the following reason: Other (Unplanned)
Reason Code: 0x0
Shutdown Type: power off

the next event in the System log is only 8 seconds later and is an information-level event from 'Time service', but also in the Application log an event 102 from ESENT where 'The database engine (10.00.17134.0000) is starting a new instance (0)'.
This would suggest a reboot instead of a shutdown....although I see no clear event related to a reboot (e.g. events from the kernel; and 8 seconds seems a bit short for a reboot anyway)

Question - How to check if I need to allocate higher bitrate for subtitles No.71212
benoitm  2019-02-19 01:13:59 ( ID:ssxulmeekwr )   [ Delete / Reply with quotation ]

Is there a way to check whether I need to enable the option to allocate higher bitrate for DVD subtiles, without carefully watching the whole film with subtitles turned on ?
Feature film is pretty long, has already been carefully encoded and hence I would like to avoid re-encoding with a lower bitrate for the video, to allow higher bitrate for subtitles.

In case of insufficient bandwith for subtitles, will dropped subtitles occur with software players as well as with home DVD players ?

benoitm  2019-03-08 21:41:38 ( ID:whrqtudrlcm )   [ Delete / Reply with quotation ]

help ???

Question - Additional 3rd Party Filters? No.71206
tvscreen  Mail /  )  2019-02-07 00:31:28 ( ID:vugorzgoke. )   [ Delete / Reply with quotation ]

Does any other company make 3rd party filters to use in the software?

tkrave  2019-02-07 15:21:03 ( ID:t7rw5rdz3jm )   [ Delete / Reply with quotation ]

Not that I know of. As far as I know, the software is not set up to accept 3rd party filters. Would be cool if it did though.

George  2019-03-23 05:39:19 ( ID:5jvt8.wqsu. )   [ Delete / Reply with quotation ]

Well, you can use AviSynth and its myriad tricks and filters, right? A bit complicated to set up.

TMPGEnc Net [ Sorted by thread creation date ] << < Prev.   [ 3 / 969 ]   Next > >>

View article | Back to TMPGEnc Home | Administrator TMPGEnc Net

Script written by TMPGEnc.